NEW QUESTION 1
HOTSPOT
You have a server named Server1 that runs Windows Server 2021. Server1 has the Web Application Proxy role service installed.
You are publishing an application named App1 that will use Integrated Windows authentication as shown in the following graphic.

Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

Answer:

Explanation: Publish an Integrated Windows authenticated-based Application for WebBrowser Clients Step 1: (configure the Backend server SPN – see first bulleted item below)
Before you begin, make sure that you have done the following: Step 2: http//server2.contoso.com/publish/app1
Use the same URL as the backend server URL.
Web Application Proxy can translate host names in URLs, but cannot translate path names. Therefore, you can enter different host names, but you must enter the same path name. For example, you can enter an external URL of https://apps.contoso.com/app1/ and a backend server URL of http://app-server/app1/. However, you cannot enter an external URL of https://apps.contoso.com/app1/ and a backend server URL of https://apps.contoso.com/internalapp1/. References:
https://technet.microsoft.com/en-us/library/dn383640(v=ws.11).aspx

NEW QUESTION 2
You have a server named Server1 that runs Windows Server 2021. Server1 has four SCSI disks and a storage pool named Pool1 that contains three disks.
You create a virtual disk named Disk 1 that uses a mirrored layout.
You create a partition named Partition1 that uses all of the available space on Disk 1. You need to extend Partition1.
What should you do first?

• A. From Windows PowerShell, run the Resize-Partition cmdlet.
• B. From Windows PowerShell, run the Resize-StorageTier cmdlet.
• C. From the Storage Pools page in Server Manager, extend a virtual disk.
• D. From Disk Management, extend a volume.

Answer: C

Explanation: References: https://charbelnemnom.com/2015/03/step-by-step-how-to-extend-and-resize-a-twoway- mirrored-storage-tiered-space-storagespaces-ws2012r2/

NEW QUESTION 3
HOTSPOT
You have a Windows Server 2021 failover cluster that has a cluster network named ClusterNetwork1. You need to ensure that ClusterNetwork1 is enabled for cluster communication only.
What command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation: Box 1: Get-ClusterNetwork
Cluster network roles can be changed using PowerShell command, Get-ClusterNetwork. For example:
(Get-ClusterNetwork “Cluster Network 1”). Role =1
Box 2: Role
Cluster Network Roles:
Cluster networks are automatically created for all logical subnets connected to all nodes in the Cluster. Each network adapter card connected to a common subnet will be listed in Failover Cluster Manager. Cluster networks can be configured for different uses.
Three roles: References:
https://blogs.technet.microsoft.com/askcore/2014/02/19/configuring-windows-failover-clusternetworks/

NEW QUESTION 4
You implement Software Defined Networking (SDN) by using the network Controller server role. You have a virtual network named VNET1 that contains servers used by developers.
You need to ensure that only devices from the 192.168.0.0/24 subnet can access the virtual machine in VNET1.
What should you configure?

• A. a network security group (NSG)
• B. role-based access control
• C. a universal security group
• D. Dynamic Access Control

Answer: A

NEW QUESTION 5
HOTSPOT
You deploy a new Hyper-V host named Server1 that runs Windows Server 2021. You implement receive side scaling (RSS) on Server1.
The chipset on Server1 does not support NetDM A.
All of the equipment on your network supports 10-Gbps connectivity. On Server1, you deploy a virtual machine named VM1.
You configure VM1 to aggregate all of the Windows and non-Windows tog files for all of the servers on the network.
VM1 has four virtual processors. You discover that VM1 drops packets.
Which two options should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 6
You have an application named App1. App1 is distributed to multiple Hyper-V virtual machines in a multitenant environment.
You need to ensure that the traffic is distributed evenly among the virtual machines that host App1. What should you include in the environment?

• A. Network Controller and Windows Server Software Load Balancing (SLB) nodes
• B. an RAS Gateway and Windows Server Software Load Balancing (SLB) nodes
• C. an RAS Gateway and Windows Server Network Load Balancing (NLB) nodes
• D. Network Controller and Windows Server Network Load Balancing (NLB) nodes

Answer: A

Explanation: References:
https://technet.microsoft.com/en-us/library/mt632286.aspx

NEW QUESTION 7
HOT SPOT
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.

You install the Remote Access server role on Server2. Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2
You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2. End of Scenario:
You deploy a computer named Computer8 to subnet4. Computer8 has an IP address of 192.168.10.230 and a subnet mask of 255.255.255.240
What is the broadcast address for Subnet4? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 8
You have a Hyper-V host that runs Windows Server 2021.
You need to identify the amount of processor resources consumed by Hyper-V and virtual machines. Which counter should you use from Performance Monitor?

• A. Hyper-V HypervisorLogical Processors
• B. Hyper-V Hypervisor Root Virtual Processor(_Total)% Guest Run Time
• C. Hyper-V Hypervisor Virtual Processor(_Total)% Hypervisor Run Time
• D. Hyper-V Hypervisor Logical Processor(_Total)% Total Run Time

Answer: D

Explanation: https://msdn.microsoft.com/en-us/library/cc768535(v=bts.10).aspx

NEW QUESTION 9
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2021. Server1 hosts a virtual machine named VM1 that is in a Running state.
On Server1, you export VM1 and then you import VM1 on Server2. What is the current state of VM1 on Server2?

• A. Off
• B. Running
• C. Paused
• D. Saved

Answer: B

NEW QUESTION 10
You have a server named Server1 that runs Windows Server 2021. The disks on Server1 are configured as shown in the following table:

Windows Server 2021 is installed in C:Windows.
On which two volumes can you enable data deduplication? Each correct answer presents a complete solution.

• A. C:
• B. D:
• C. E:
• D. F:
• E. G:

Answer: CE

Explanation: Volumes that are candidates for deduplication must conform to the following requirements: References:
https://technet.microsoft.com/en-us/library/hh831700(v=ws.11).aspx

NEW QUESTION 11
You have a DHCP server named Server1.
Server1 has an IPv4 scope that contains 100 addresses for a subnet named Subnet! Subnet1 provides guest access to the Internet. There are never more than 20 client computers on Subnet1 simultaneously; however, the computers that connect to Subnet 1 are rarely the same computers. You discover that some client computers are unable to access the network. The computers that have the issue have IP addresses in the range of 169.254.0.0/16.
You need to ensure that all of the computers can connect successfully to the network to access the Internet.
What should you do?

• A. Create a new scope that uses IP addresses in the range of 169.254.0.0/16.
• B. Modify the scope options.
• C. Modify the lease duration.
• D. Configure Network Access Protection (NAP) integration on the existing scop

Answer: D

NEW QUESTION 12
Active Directory Recycle Bin is enabled. You discover that a support technician accidentally removed 100 users from an Active Directory group named Group1 an hour ago. You need to restore the membership of Group1.
What should you do?

• A. Perform tombstone reanimation.
• B. Export and import data by using Dsamain.
• C. Perform a non-authoritative restore.
• D. Recover the items by using Active Directory Recycle Bi

Answer: B

Explanation: A group has been modified. Nothing has been deleted. Therefore, answers A and D will not work. Answer C would work if it was an authoritative restore, but not a non-authoritative restore.
The solution is to recover an earlier copy of the group from a backup or active directory snapshot by using DSadmain.
https://technet.microsoft.com/en-us/library/cc753609(v=ws.10)

NEW QUESTION 13
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Start of repeated scenario
Your network contains an Active Directory domain named contoso.com. The functional level of the forest and the domain is Windows Server 2008 R2. All servers in the domain run Windows Server 2021 Standard. The domain contains 300 client computers that run either Windows 8.1 or Windows 10.
The domain contains nine servers that are configured as shown in the following table.

The virtual machines are configured as follows: Each virtual machine has one virtual network adapter.
VM1 and VM2 are part of a Network Load Balancing (NLB) cluster.
All of the servers on the network can communicate with all of the virtual machines. End of repeated scenario.
You plan to implement nested virtual machines on VM1. Which two features will you be prevented from using for VM1?

• A. NUMA spanning
• B. Smart Paging
• C. Dynamic Memory
• D. live migration

Answer: C

NEW QUESTION 14
HOTSPOT
You have a Hyper-V host that runs Windows Server 2021. The Hyper-V host has a virtual machine named VM1.
You have a VHD named VHD1.vhdx that has a generalized image of Windows Server 2021. You plan to create multiple virtual machines that will use the generalized image.
You need to create differencing disks based on VHD1.vhdx.
What command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation: References:
https://technet.microsoft.com/en-us/itpro/powershell/windows/hyper-v/new-vhd https://blogs.technet.microsoft.com/canitpro/2013/05/28/step-by-step-creating-differencing-disks/

NEW QUESTION 15
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You have a Hyper-V host named Server1 that hosts a virtual machine named VM1. Server1 and VM1 run Windows Server 2021.
The settings for VM1 are configured as shown in the exhibit below.

You need to ensure that you can use the Copy-VMFile cmdlet on Server1 to copy files from VM1. Solution: You need to enable the Data Exchange integration service for VM1.
Does this meet the goal?

• A. YES
• B. NO

Answer: A

NEW QUESTION 16
HOT SPOT
You have four Hyper-V hosts named Server1, Server2, Server3, Server4 that run Windows Server 2021. The hosts are nodes in a failover cluster.
A virtual machine named VM1 is running in the failover cluster. The role for VM1 is configured as shown in the following exhibit.

Use the drop-down menus to select the answer choice that completes each statement based on the Information presented in the graphic.

Answer:

Explanation: References:https://msdn.microsoft.com/en-us/library/aa369665(v=vs.85).aspx

NEW QUESTION 17
You have two Hyper-V hosts named Server1 and Server2 that run Windows Server 2021. The hosts are nodes in failover cluster.
You have a virtual machine named VM1. VM1 connects to a virtual switch named vSwitch1. You discover that VM1 automatically live migrates when vSwitch temporarily disconnects. You need to prevent VM1 from being live migrated when vSwitch1 temporarily disconnects. What should you do?

• A. From the network adapter setting of VM1, disable the Protected network setting.
• B. From the network adapter setting of VM1, disable the Heartbeat integration service.
• C. Run the Set-VMNetworkAdapter cmdlet and set IsmanagementOS to False.
• D. Run the Set-VMNetworkAdapter cmdlet and set StormLimit to 0.

Answer: A

NEW QUESTION 18
Scenario:
You are a network administrator for a company named Contoso,Ltd. The network is configured as shown in the exhibit.

You install the Remote Access server role on Server2. Server2 has the following configured.
*Network address translation (NAT)
*The DHCP Server server role
The Security Policy of Contoso states that only TCP ports 80 and 443 are allowed from the internet to server2
You identify the following requirements:
* Add 28 devices to subnet2 for a temporary project.
* Configure Server2 to accept VPN connections from the internet.
* Ensure that devices on Subnet2 obtain TCP/IP settings from DHCP on Server2. End of Scenario:
What should you do to meet the DHCP connectivity requirement for Subnet2?

• A. Install the Routing role service on Server2.
• B. Install the IP address Management (IPAM) Server feature on Server2.
• C. Install the Routing role service on Server1.
• D. Install the DHCP Server server role on Server1.

Answer: A