NEW QUESTION 1
HOT SPOT
You have a DirectAccess Server that is accessible by using the name directaccess.fabrikam.com On the DirectAccess server, you install a new server certificate that has a subject name of directaccess.contoso.com, and then you configure DNS records for directaccess.contoso.com
You need to change the endpoint name for DirectAccess to directaccess.contoso.com
What command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation: Set-DaClient-ComputerName directaccess.contoso.com

NEW QUESTION 2
HOT SPOT
Refer to Exhibit:

Container1 hosts a website on port 8080.
You create a port mapping between port 8080 on Container1 and port 80 on Server1.
Which URL can you use to access the website from Server1, Server2, and Container2? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 3
HOTSPOT
Your network contains an Active Directory forest. The forest contains two domain controllers named DC1 and DC2 that run Windows Server 2021. DC1 holds all of the operations master roles.
DC1 experiences a hardware failure.
You plan to use an automated process that will create 1,000 user accounts. You need to ensure that the automated process can complete successfully.
Which command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation: Box 1: Move-ADDirectoryServerOperationMasterRole
Box 2: RIDMaster
Box 3: -Force

NEW QUESTION 4
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, white others might not have a correct solution.
You have a server named Server1 that runs Windows Server 2021. Server1 hosts a line-of-business application named App1. App1 has a memory leak that occasionally causes the application to consume an excessive amount of memory.
You need to log an event in the Application event log whenever App1 consume more than 4 GB of memory.
Solution: You create a performance counter data collector. Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 5
DRAG DROP
On a new server, you install Windows Server 2021, and then you install the Hyper-V server role. You need to ensure that you can deploy Windows containers that use an image of the Server Core installation of Windows Server.
Which four commands should you use in sequence? To answer, move the appropriate commands from the list of commands to the answer area and arrange them in the correct order.

Answer:

Explanation: References:
https://docs.microsoft.com/en-us/virtualization/windowscontainers/deploy-containers/deploycontainers- on-server

NEW QUESTION 6
You have a Hyper-V failover cluster that contains three nodes. Virtual machines are distributed evenly across the cluster nodes.
You need to ensure that if a node loses connectivity from the other nodes, the virtual machines on the node will be transitioned to one of the remaining nodes after one minute.
Which settings should you modify?

• A. QuarantineDuration and QuarantineThreshold
• B. SameSubnetDelay and CrossSubnetDelay
• C. QuorumArbitrationTimeMax and RequestReplyTimeout
• D. ResiliencyPeriod and ResiliencyLevel

Answer: C

NEW QUESTION 7
You have Hyper-V virtual machines that run 50 web servers, 10 Microsoft SQL Server servers. 10 file servers, and eight domain controllers.
You need to implement a backup strategy that meets the following requirements:
*Backs up all servers
*Centralizes backup management
*Performs application-level backups
*Provides the ability to perform bare metal recovery What should you use?

• A. Microsoft Azure VM Backup
• B. Microsoft Azure Backup Agent
• C. Windows Server Backup
• D. Microsoft Azure Backup Server

Answer: A

NEW QUESTION 8
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a Hyper-V host named Server1 that runs Windows Server 2021. Server1 has a virtual machine that uses a virtual hard disk (VHD) named disk1.vhdx.
You receive the following warning message from Event Viewer: “One or more virtual hard disks have a physical sector size that is smaller than the physical sector size of the storage on which the virtual hard disk file is located.”
You need to resolve the problem that causes the warning message. What should you run?

• A. the Mount-VHD cmdlet
• B. the Diskpart command
• C. the Set-VHD cmdlet
• D. the Set-VM cmdlet
• E. the Set-VMHost cmdlet
• F. the Set-VMProcessor cmdlet
• G. the Install-WindowsFeature cmdlet
• H. the Optimize-VHD cmdlet

Answer: C

Explanation: Issue
One or more virtual hard disks have a physical sector size that is smaller than the physical sector size of the storage on which the virtual hard disk file is located.
Resolution
Do one of the following:
The Set-VHD cmdlet sets the ParentPath or PhysicalSectorSizeBytes properties of a virtual hard disk. The two properties must be set in separate operations.
The Set-VHD -PhysicalSectorSizeBytes parameter specifies the physical sector size, in bytes. Valid values are 512 and 4096. This parameter is supported only on a VHDX-format disk that is not attached when the operation is initiated.
References:
https://technet.microsoft.com/en-us/windows-server-docs/compute/hyper-v/best-practicesanalyzer/ avoid-using-virtual-hard-disks-with-sector-size-less-than-size-of-physical https://technet.microsoft.com/en-us/library/hh848561.aspx

NEW QUESTION 9
You have a server named Server1 that runs Windows Server 2021. Server1 is an IP Address Management (IPAM) server that collects DHCP and DNS logs and events for your entire network. You need to get the IP addresses that were assigned to a client computer named Computer1 during the last week.
What should you do on Server1?

• A. Open Event Viewer and click Windows Log
• B. Filter the Forwarded Events log for Computer1.
• C. Open Event Viewer and click Windows Log
• D. Filter the Security log for Computer1.
• E. Run the Get-IpamDhcpConfigurationEvent cmdlet.
• F. Run the Get-IpamIpAddressAuditEvent cmdle

Answer: D

Explanation: References: https://docs.microsoft.com/en-us/powershell/module/ipamserver/getipamipaddressauditevent? view=win10-ps

NEW QUESTION 10
You have a server named Server1 that runs Windows Server 2021. Server1 has the DHCP Server and the Windows Deployment Service server roles installed.
Server1 is located on the same subnet as client computers.
You need to ensure that clients can perform a PXE boot from Server1.
Which two IPv4 options should you configure in DHCP? Each correct answer presents part of the solution.

• A. 003 Router
• B. 066 Boot Server Host Name
• C. 015 DNS Domain Name
• D. 006 DNS Servers
• E. 060 Option 60

Answer: AB

NEW QUESTION 11
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest has three sites located in London, Paris and Berlin.
The London site contains a web server named Web1 that runs Windows Server 2021.
You need to configure Web1 as an HTTP content server for the hosted cache servers located in the Paris and Berlin sites.
Solution: You install the Deployment Server role service, and then you restart the World Wide Web Publishing Service.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 12
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a two-node Hyper-V cluster named Cluster1. A virtual machine named VM1 runs on Cluster1.
You need to configure monitoring of VM1. The solution must move VM1 to a different node if the Print Spooler service on VM1 stops unexpectedly.
Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management snap-in
• D. the configurehyperv.exe command
• E. the Disk Management snap-in
• F. the Failover Cluster Manager snap-in
• G. the Hyper-V Manager snap-in
• H. the Server Manager app

Answer: F

NEW QUESTION 13
Your network contains an Active Directory domain. The domain contains two Hyper-V hosts. You plan to perform live migrations between the hosts.
You need to ensure that the live migration traffic is authenticated by using Kerberos. What should you do first?

• A. From Server Manager, install the Host Guardian Service server role on a domain controller.
• B. From Active Directory Users and Computers, add the computer accounts for both servers to the Cryptographic Operators group.
• C. From Active Directory Users and Computers, modify the Delegation properties of the computer accounts for both servers.
• D. From Server Manager, install the Host Guardian Service server role on both server

Answer: C

Explanation: If you have decided to use Kerberos to authenticate live migration traffic, configure constrained delegation before you proceed to the rest of the steps.
To configure constrained delegation

NEW QUESTION 14
You have 2000 devices, One hundred of the devices are mobile devices that have physical addresses beginning with 98-5F.
You have a DHCP server named Server1.
You need to ensure that the mobile devices register their host name by using a DNS suffix of mobile.contoso.com

• A. From the properties of Scopte1, Modify the Conflict detection attempts setting.
• B. From the properties of Scope1, Configure Name Protection.
• C. From the Properties of IPV4, configure the bindings.
• D. From IPV4, create a new filter.
• E. From the properties of Scope1, create an exclusion range.
• F. From IPv4, run the DHCP Policy Configuration Wizard.
• G. From Control Panel, modify the properties of Ethernet.
• H. From Scope1, create a reservation

Answer: F

NEW QUESTION 15
You have an Active Directory domain named Contoso.com. The domain contains servers named Server1 and Server2 that run Windows Server 2021.
You install the Remote Access server role on Server1. You install the Network Policy and Access Services server role on Server2.
You need to configure Server1 to use Server2 as a RADIUS server. What should you do?

• A. From the Connection Manager Administration Kit, create a Connection Manager profile.
• B. From Routing and Remote Access, configure the authentication provider.
• C. From Active Directory Users and Computers, modify the Delegation settings of the Server1 computer account.
• D. From Server Manager, create an Access Polic

Answer: D

Explanation: http://www.nyazit.com/configure-network-policy-server-2021/

NEW QUESTION 16
You are configuring a Windows Server 2021 failover cluster in a workgroup.
Before installing one of the nodes, you run the ipconfig /all command and receive the following output.

You need to ensure that Server1 can be added as a node in the cluster. What should you do?

• A. Configure a DNS suffix.
• B. Enable NetBIOS over TCP/IP.
• C. Change the Node Type to Broadcast.
• D. Assign a static IP addres

Answer: A

Explanation: In addition to the pre-requisites of Single-domain clusters, there are additional pre-requisites for Multi-domain or Workgroup clusters in the Windows Server 2021 including Primary DNS Suffix Requirements.
Note: Failover Clusters can now be created in the following configurations: References:
https://blogs.msdn.microsoft.com/clustering/2015/08/17/workgroup-and-multi-domain-clusters-inwindows- server-2021/

NEW QUESTION 17
You have an Active Directory forest that contains 30 servers and 6,000 Client computers. You deploy a new DHCP server that runs Windows Server 2021. You need to retrieve the list of the authorized DHCP servers. Which command should you run?

• A. Get-DHCPServerDatabase
• B. Netstat -p IP -s -a
• C. Get-DHCPServerInDc
• D. Show-ADAuthenticationPolicyExpression -AllowedToAuthenticateTo

Answer: C

Explanation: To get all authorized DHCP servers in Active Directory, you can use the following PowerShell cmdlet: Get-DhcpServerinDC

NEW QUESTION 18
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com
You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The windows server 2021 source files are located in drive D.
Solution: You run the following cmdlet.
New-NanoServerImage –Edition Datacenter –DeploymentType Most –Compute –Media ‘D:’ – TargetPath c:Nano1Nano1.wim –ComputerNamae Nano1 –DomainName Contoso.com
Does this meet the goal?

• A. Yes
• B. NO

Answer: B