NEW QUESTION 1
HOT SPOT
On a DNS server that runs Windows Server 2021, you plan to create two new primary zones named adatum.com and contoso.com. You have the following requirements for the zones:
• Ensure that computers on your network can register records automatically in the adatum.com zone.
• Ensure that records that are stale for two weeks are purged automatically from the contoso.com zone.
What should you configure for each zone? To answer, select the appropriate options in the answer area.

Answer:

Explanation:

NEW QUESTION 2
You have a server named Server1 that runs Windows Server 2021.
Server1 has two network cards. One network card connects to your internal network and the other network card connects to the Internet.
You plan to use Server1 to provide Internet connectivity for client computers on the internal network.
You need to configure Server1 as a network address translation (NAT) server. Which server role or role service should you install on Server1 first?

• A. Network Controller
• B. Web Application Proxy
• C. Routing
• D. DirectAccess and VPN (RAS)

Answer: C

NEW QUESTION 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions, while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory forest named contoso.com. The forest contains a member server named Server1 that runs Windows Server 2021. All domain controllers run Windows Server 2012 R2.
Contoso.com has the following configuration:

You plan to deploy an Active Directory Federation Services (AD FS) farm on Server1 and to configure device registration.
You need to configure Active Directory to support the planned deployment. Solution: You run adprep.exe from the Windows Server 2021 installation media. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: Device registration requires a forest functional level of Windows Server 2012 R2.
New installations of AD FS 2021 require the Active Directory 2021 schema (minimum version 85). References:
https://technet.microsoft.com/en-us/library/dd464018(v=ws.10).aspx https://technet.microsoft.com/en-us/windows-server-docs/identity/ad-fs/operations/configuredevice- based-conditional-access-on-premises

NEW QUESTION 4
HOT SPOT
Your network contains an Active Directory forest named contoso.com. The forest contains an Active Directory Federation Services (AD FS) farm. You install Windows Server 2021 on a server named Server2. You need to configure Server2 as a node in the federation server farm. Which cmdlets should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation: 1) Install-WindowsFeature
2) Add-AdfsFarm

NEW QUESTION 5
DRAG DROP
You have a Hyper-V host named Server1 that runs Windows Server 2021. The installation source files for Windows Server 2021 are located in D:Source. You need to create a Nano Server image.
Which cmdlets should you run? To answer, drag the appropriate cmdlets to the correct targets. Each cmdlet may be used once, more than once, or not at all. You may need to drag the split bat between panes or scroll to view content.

Answer:

Explanation: Step 1: Import Module
Import-Module .NanoServerImageGenerator.psm1 Step 2: New New-NanoServerImage
Create Nano Server Image VHDX
New-NanoServerImage -MediaPath .Files -BasePath.Base -TargetPath .ImagesNanoVMG A.vhdx
References:
https://technet.microsoft.com/en-us/windows-server-docs/get-started/deploy-nano-server

NEW QUESTION 6
Your company has 10 offices. Each office has a local network that contains several Hyper-V hosts that run Windows Server 2021. All of the offices are connected by high speed, low latency WAN links. You need to ensure that you can use QoS policies for Live Migration traffic between the offices. Which component should you install?

• A. the Canary Network Diagnostics feature
• B. the Network Controller server role
• C. the Data Center Bridging feature
• D. the Multipath I/O feature
• E. the Routing role service

Answer: C

NEW QUESTION 7
You have a server named Server1 that runs Windows Server 2021. The Docker daemon runs on
Server1.
You need to configure the Docker daemon to accept connections only on TCP port 64500. What should you do?

• A. Run the sc control command.
• B. Run the New-NetFirewallRule cmdlet.
• C. Modify the routing table on Server1.
• D. Run the sc config comman

Answer: D

Explanation: References:
https://docs.microsoft.com/en-us/virtualization/windowscontainers/manage-docker/configuredocker- daemon

NEW QUESTION 8
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have two servers named Server1 and Server2 that run Windows Server 2021. Server1 and Server2 have the Hyper-V server role installed.
An iSCSI SAN connects to the network.
You create a LUN on the SAN and configure both servers to connect to the iSCSI target.
You create a failover cluster and add Server1 and Server2 to the cluster. You connect both servers to the iSCSI target and format the shared storage.
You need to add the shared storage to the cluster. The solution must ensure that virtual machines running on both nodes can access the shared storage simultaneously.
Which tool should you use?

• A. the clussvc.exe command
• B. the cluster.exe command
• C. the Computer Management snap-in
• D. the configurehyperv.exe command
• E. the Disk Management snap-in
• F. the Failover Cluster Manager snap-in
• G. the Hyper-V Manager snap-in
• H. the Server Manager app

Answer: F

Explanation: References:
https://technet.microsoft.com/en-us/library/jj612868(v=ws.11).aspx https://technet.microsoft.com/en-us/library/jj863389.aspx
To implement certain scenarios for clustered virtual machines, the virtual machine storage and virtual hard disk file should be configured as Cluster Shared Volumes (CSV). To configure a disk in clustered storage as a CSV volume, you can use Failover Cluster Manager or the Windows PowerShellAdd-ClusterSharedVolume cmdlet. For detailed planning considerations and steps to create CSV, see Use Cluster Shared Volumes in a Windows Server 2012 Failover Cluster.

NEW QUESTION 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
Your network contains an Active Directory domain named contoso.com
You need to create a Nano Server image named Nano1 that will be used as a virtualization host. The windows server 2021 source files are located in drive D.
Solution: You run the following cmdlet.
New-NanoServerImage –Edition Datacenter –DeploymentType Host –Package Mictosoft- NanoServer-SCVMM-Package –MediaPath ‘D: -TargetPath C:nano1Nano1.wim –ComputerName Nano1 –Domaintiame Contoso.com
Does this meet the goal?

• A. Yes
• B. NO

Answer: A

NEW QUESTION 10
HOTSPOT
You have a server named Server1 that runs Windows Server 2021 and has a Hyper-V server role installed.
You open Disk Management on Server1 as shown in the following graphic.

You plan to configure Disk 13 as a pass-through disk for a generation 1 virtual machine.
Use the drop-down menus to select the answer choice that completes each statement based on the information presented in the graphic.

Answer:

Explanation:

NEW QUESTION 11
DRAG DROP
You have a server that runs Windows Server 2021. You install three additional disks named Disk1, Disk2, and Disk3. You plan to use these physical disks to store data.
You need to create a volume to store data. The solution must prevent data loss in the event of a
single disk failure.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation: Step 1: Create a Storage Pool
First we create a Storage Pool. We specify which disks should be included in the storage pool. Example:

Step 2: Create a Virtual Disk
After creating the storage pool now start creating a virtual disk for the pool you had created.

Step 3: Create a Volume
After creating the virtual disk, create a volume with the NewVolume Wizard. You create the volume on the Virtual Disk you created in Step 2.

References:
http://www.tactig.com/create-a-storage-pool-windows-server/

NEW QUESTION 12
You have an IP Address Management (IPAM) deployment that is used to manage all of the DNS servers on your network. IPAM is configured to use Group Policy provisioning.
You discover that a user adds a new mail exchanger (MX) record to one of the DNS zones. You want to identify which user added the record.
You open Event Catalog on an IPAM server, and you discover that the most recent event occurred yesterday. You need to ensure that the operational events in the event catalog are never older than one hour.
What should you do?

• A. From the properties on the DNS zone, modify the refresh interval.
• B. From an IPAM_DNS Group Policy object (GPO), modify the Group Policy refresh interval.
• C. From Task Scheduler, modify the MicrosoftWindowsIPAMAudit task.
• D. From Task Scheduler, create a scheduled task that runs the Update-IpamServer cmdle

Answer: C

NEW QUESTION 13
DRAG DROP
You have a server named Server1 that runs Windows Server 2021.
You need to deploy the first cluster node of a Network Controller cluster.
Which four cmdlets should you run in sequence? To answer, move the appropriate cmdlets from the list of cmdlets to the answer area and arrange them in the correct order.

Answer:

Explanation: Deploy Network Controller using Windows PowerShell Step 1: Install-WindowsFeature
Install the Network Controller server role
To install Network Controller by using Windows PowerShell, type the following commands at a Windows PowerShell prompt, and then press ENTER.
Install-WindowsFeature -Name NetworkController –IncludeManagementTools Step 2: New-NetworkControllerNodeObject
You can create a Network Controller cluster by creating a node object andthen configuring the cluster.
You need to create a node object for each computer or VM that is a member of the Network Controller cluster.
Tocreate a node object, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
New-NetworkControllerNodeObject –Name <string> -Server<String> -FaultDomain <string>-RestInte Step 3: Install-NetworkControllerCluster
To configure the cluster, typethe following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
Install-NetworkControllerCluster –Node <NetworkControllerNode[]> –ClusterAuthentication … Step 4: Install-NetworkController
To configure the Network Controller application, type the following command at the Windows PowerShell command prompt, and then press ENTER. Ensure that you add values for each parameter that are appropriate for your deployment.
Install-NetworkController –Node <NetworkControllerNode[]> –ClientAuthentication References:
https://technet.microsoft.com/en-us/library/mt282165.aspx

NEW QUESTION 14
HOTSPOT
Your company has a main office and a branch office. The two offices connect to each other by using a WAN link.
Your network contains an Active Directory forest named contoso.com. The forest contains a domain controller named DC1. All of the domain controllers are located in the main office.
You install a read-only domain controller (RODC) named RODC1 in the branch office.
You create a user account for a new user named User1. You add User1 to the Allowed RODC Password Replication Group. User1 starts work on Monday.
You are notified that the WAN link will be down for maintenance on Monday. You need to ensure that User1 can log on in the branch office site on Monday.
Which command should you run? To answer, select the appropriate options in the answer area.

Answer:

Explanation: References:
https://technet.microsoft.com/en-us/library/cc742095(v=ws.11).aspx

NEW QUESTION 15
Your network contains an Active Directory domain named contoso.com. The domain contains a Hyper-V host named Server1 that runs Windows Server 2021.
Server1 hosts four machines that are members of the domains. The virtual machines are configured as sown in the following table.

Which virtual machines can you manage by using PowerShell Direct?

• A. Only VM2
• B. VM1, VM2, and VM4
• C. only VM4
• D. VM1, VM2, and VM3

Answer: D

NEW QUESTION 16
Your network contains an Active Directory domain named contoso.com. The domain contains two servers named Server1 and Server2 that run Windows Server 2021.
Each server has an operating system disk and four data disks. All of the disks are locally attached SATA disks.
Each disk is a basic disk, is initialized as an MBR disk, and has a single NTFS volume.
You plan to implement Storage Spaces Direct by using the data disks on Server1 and Server2. You need to prepare the data disks for the Storage Spaces Direct implementation.
What should you do?

• A. Format the volumes on the data disks as exFAT.
• B. Initialize the data disks as GPT disks and create a ReFS volume on each disk.
• C. Convert the data disks to dynamic disks.
• D. Delete the volumes from the data disk

Answer: D

NEW QUESTION 17
HOT SPOT
You have a Windows Server 2021 failover cluster that contains two servers named Server1 and Server2.
You need to apply patches to Server1.
Which two commands should you run before you apply the patches? To answer, select the appropriate options in the answer area.

Answer:

Explanation: References:
https://support.microsoft.com/en-us/help/174799/how-to-update-windows-server-failover-clusters https://technet.microsoft.com/en-us/library/ee461003.aspx

NEW QUESTION 18
HOTSPOT
Your company has a testing environment that contains an Active Directory domain named contoso.com. The domain contains a server named Server1 that runs Windows Server 2021. Server1 has IP Address Management (IPAM) installed. IPAM has the following configuration.

The IPAM Overview page from Server Manager is shown in the IPAM Overview exhibit. (Click the Exhibit button.)

The group policy configurations are shown in the GPO exhibit. (Click the Exhibit button.) For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Answer:

Explanation: No domains have been selected in the “Configure Server Discovery” option. Therefore, no automatic discovery will take place. Manual addition of a server will also fail because IPAM needs a domain configured for server verification.