200-125 Exam Questions - Online Test

200-125 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

Proper study guides for Far out Cisco CCNA Cisco Certified Network Associate CCNA (v3.0) certified begins with Cisco ccna 200 125 dumps preparation products which designed to deliver the Download 200 125 ccna pdf questions by making you pass the cisco ccna 200 125 test at your first time. Try the free ccna 200 125 dumps demo right now.

P.S. Download 200-125 rapidshare are available on Google Drive, GET MORE: https://drive.google.com/open?id=1N7mstYjhTswrvFd1eA3ZZFuxiKuT_fqh

New Cisco 200-125 Exam Dumps Collection (Question 6 - Question 15)

New Questions 6

How does a DHCP server dynamically assign IP addresses to hosts?

A. Addresses are permanently assigned so that the host uses the same address at all times.

B. Addresses are assigned for a fixed period of time. At the end of the period, a new request for an address must be made, and another address is then assigned.

C. Addresses are leased to hosts. A host will usually keep the same address by periodically contacting the DHCP server to renew the lease.

D. Addresses are allocated after a negotiation between the server and the host to determine the length of the agreement.

Answer: C

Explanation:

DHCP works in a client/server mode and operates like any other client/server relationship. When a PC connects to a DHCP server, the server assigns or leases an IP address to that PC. The PC connects to the network with that leased IP address until the lease expires. The host must contact the DHCP server periodically to extend the lease. This lease mechanism ensures that hosts that move or power off do not hold onto addresses that they do not need. The DHCP server returns these addresses to the address pool and reallocates them as necessary.

New Questions 7

How many bits are contained in each field of an IPv6 address?

A. 24

B. 4

C. 8

D. 16

Answer: D

Explanation:

An IPv6 address is represented as eight groups of four hexadecimal digits, each group representing 16 bits (two octets). The groups are separated by colons (:). An example of an IPv6 address is 2001:0db8:85a3:0000:0000:8a2e:0370:7334.

New Questions 8

What are three factors a network administrator must consider before implementing Netflow in the network? (Choose three.)

A. CPU utilization

B. where Netflow data will be sent

C. number of devices exporting Netflow data

D. port availability

E. SNMP version

F. WAN encapsulation

Answer: A,B,C

Explanation:

NetFlow has a reputation for increasing CPU utilization on your network devices. Cisco's performance testing seems to indicate that newer hardware can accommodate this load pretty well, but you will still want to check it out before you turn on the feature. Some symptoms of high CPU utilization are very large jitter and increased delay. Services running on the device may also be affected.

Another thing to keep in mind is the amount of data you're going to be sending across the network. Depending on how much traffic you have and how you configure it, the traffic can be substantial. For example, you may not want to send NetFlow data from a datacenter switch to a NetFlow collector on the other side of a small WAN circuit. Also bear in mind that the flows from aggregating large numbers of devices can add up.

Reference: http://searchenterprisewan.techtarget.com/tip/How-the-NetFlow-protocol- monitors-your-WAN

New Questions 9

When a DHCP server is configured, which two IP addresses should never be assignable to hosts? (Choose two.)

A. network or subnetwork IP address

B. broadcast address on the network

C. IP address leased to the LAN

D. IP address used by the interfaces

E. manually assigned address to the clients

F. designated IP address to the DHCP server

Answer: A,B

Explanation:

Network or subnetwork IP address (for example 11.0.0.0/8 or 13.1.0.0/16) and broadcast address (for example 23.2.1.255/24) should never be assignable to hosts. When try to assign these addresses to hosts, you will receive an error message saying that they canu2021t be assignable.

New Questions 10

Which item represents the standard IP ACL?

A. access-list 110 permit ip any any

B. access-list 50 deny 192.168.1.1 0.0.0.255

C. access list 101 deny tcp any host 192.168.1.1

D. access-list 2500 deny tcp any host 192.168.1.1 eq 22

Answer: B

Explanation:

The standard access lists are ranged from 1 to 99 and from 1300 to 1999 so only access list 50 is a standard access list.

New Questions 11

CORRECT TEXTA network associate is adding security to the configuration of the Corp1 router. The user on host C should be able to use a web browser to access financial information from the Finance Web Server. No other hosts from the LAN nor the Core should be able to use a web browser to access this server. Since there are multiple resources for the corporation at this location including other resources on the Finance Web Server, all other traffic should be allowed.

The task is to create and apply an access-list with no more than three statements that will allow ONLY host C web access to the Finance Web Server. No other hosts will have web access to the Finance Web Server. All other traffic is permitted.

Access to the router CLI can be gained by clicking on the appropriate host.

All passwords have been temporarily set to "cisco".

The Core connection uses an IP address of 198.18.247.65

The computers in the Hosts LAN have been assigned addresses of 192.168.240.1 - 192.168.240.254

u2711 host A 192.168.240.1

u2711 host B 192.168.240.2

u2711 host C 192.168.240.3

Answer:

Corp1#conf t

Corp1(config)# access-list 128 permit tcp host 192.168.240.1 host 172.22.141.26 eq www

Corp1(config)# access-list 128 deny tcp any host 172.22.141.26 eq www

Corp1(config)# access-list 128 permit ip any any

Corp1(config)#int fa0/1

Corp1(config-if)#ip access-group 128 out

Corp1(config-if)#end

Corp1#copy run startup-config

New Questions 12

A network administrator is configuring ACLs on a Cisco router, to allow traffic from hosts on networks 192.168.146.0, 192.168.147.0, 192.168.148.0, and 192.168.149.0 only. Which two ACL statements, when combined, would you use to accomplish this task? (Choose two.)

A. access-list 10 permit ip 192.168.146.0 0.0.1.255

B. access-list 10 permit ip 192.168.147.0 0.0.255.255

C. access-list 10 permit ip 192.168.148.0 0.0.1.255

D. access-list 10 permit ip 192.168.149.0 0.0.255.255

E. access-list 10 permit ip 192.168.146.0 0.0.0.255

F. access-list 10 permit ip 192.168.146.0 255.255.255.0

Answer: A,C

Explanation:

u201caccess-list 10 permit ip 192.168.146.0 0.0.1.255u201d would allow only the 192.168.146.0 and

192.168.147.0 networks, and u201caccess-list 10 permit ip 192.168.148.0 0.0.1.255u201d would allow only the 192.168.148.0 and 192.168.149.0 networks.

New Questions 13

Scenario

Refer to the topology. Your company has connected the routers R1, R2, and R3 with serial links. R2 and R3 are connected to the switches SW1 and SW2, respectively. SW1 and SW2 are also connected to the routers R4 and R5.

The EIGRP routing protocol is configured.

You are required to troubleshoot and resolve the EIGRP issues between the various routers.

Use the appropriate show commands to troubleshoot the issues.

Router R6 does not form an EIGRP neighbor relationship correctly with router R1. What is the cause for this misconfiguration?

A. The K values mismatch.

B. The AS does not match.

C. The network command is missing.

D. The passive interface command is enabled.

Answer: C

Explanation:

The link from R1 to R6 is shown below:

As you can see, they are both using e0/0. The IP addresses are in the 192.168.16.0 network:

But when we look at the EIGRP configuration, the u201cnetwork 192.168.16.0u201d command is missing on R6.

New Questions 14

Refer to the exhibit.

The network shown in the diagram is experiencing connectivity problems. Which of the following will correct the problems? (Choose two.)

A. Configure the gateway on Host A as 10.1.1.1.

B. Configure the gateway on Host B as 10.1.2.254.

C. Configure the IP address of Host A as 10.1.2.2.

D. Configure the IP address of Host B as 10.1.2.2.

E. Configure the masks on both hosts to be 255.255.255.224.

F. Configure the masks on both hosts to be 255.255.255.240.

Answer: B,D

Explanation:

The switch 1 is configured with two VLANs: VLAN1 and VLAN2. The IP information of member Host A in VLAN1 is as follows: Address : 10.1.1.126

Mask : 255.255.255.0

Gateway : 10.1.1.254

The IP information of member Host B in VLAN2 is as follows: Address : 10.1.1.12

Mask : 255.255.255.0

Gateway : 10.1.1.254

The configuration of sub-interface on router 2 is as follows: Fa0/0.1 -- 10.1.1.254/24 VLAN1

Fa0/0.2 -- 10.1.2.254/24 VLAN2

It is obvious that the configurations of the gateways of members in VLAN2 and the associated network segments are wrong. The layer3 addressing information of Host B should be modified as follows:

Address : 10.1.2.X Mask : 255.255.255.0

New Questions 15

CORRECT TEXTThe following have already been configured on the router:

u2711 The basic router configuration

u2711 The appropriate interfaces have been configured for NAT inside and NAT outside.

u2711 The appropriate static routes have also been configured (since the company will be a stub network, no routing protocol will be required)

u2711 All passwords have been temporarily set to u201cciscou201d.

The task is to complete the NAT configuration using all IP addresses assigned by the ISP to provide Internet access for the hosts in the Weaver LAN. Functionality can be tested by clicking on the host provided for testing.

Configuration information: router name u2013 Weaver

inside global addresses u2013 198.18.184.105 - 198.18.184.110/29 inside local addresses - 192.168.100.17 u2013 192.168.100.30/28

number of inside hosts u2013 14

A network associate is configuring a router for the weaver company to provide internet access. The ISP has provided the company six public IP addresses of 198.18.184.105 198.18.184.110. The company has 14 hosts that need to access the internet simultaneously. The hosts in the company LAN have been assigned private space addresses in the range of 192.168.100.17 u2013 192.168.100.30.

Answer:

The company has 14 hosts that need to access the internet simultaneously but we just have 6 public IP addresses from 198.18.184.105 to 198.18.184.110/29. Therefore we have to use NAT overload (or PAT)

Double click on the Weaver router to open it

Router>enable Router#configure terminal

First you should change the router's name to Weaver

Router(config)#hostname Weaver

Create a NAT pool of global addresses to be allocated with their netmask. Weaver(config)#ip nat pool mypool 198.18.184.105 198.18.184.110 netmask 255.255.255.248

Create a standard access control list that permits the addresses that are to betranslated.

Weaver(config)#access-list 1 permit 192.168.100.16 0.0.0.15

Establish dynamic source translation, specifying the access list that was definedin the prior step.

Weaver(config)#ip nat inside source list 1 pool mypool overload

This command translates all source addresses that pass access list 1, which means a source address from 192.168.100.17 to 192.168.100.30, into an address from the pool

named mypool (the pool contains addresses from198.18.184.105 to 198.18.184.110). Overloadkeyword allows to map multiple IP addresses to a single registered IPaddress (many-to-one) by using different ports.

The question said that appropriate interfaces have been configured for NAT inside and NAT outside statements.

This is how to configure the NAT inside and NAT outside, just for yourunderstanding:

Weaver(config)#interface fa0/0 Weaver(config-if)#ip nat inside Weaver(config-if)#exit Weaver(config)#interface s0/0 Weaver(config-if)#ip nat outside Weaver(config-if)#end

Finally, we should save all your work with the following command:

Weaver#copy running-config startup-config

Check your configuration by going to "Host for testing" and type:

C :\>ping 192.0.2.114

The ping should work well and you will be replied from 192.0.2.114