70-680 Exam Questions - Online Test

70-680 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

Master the mcts 70 680 TS:Windows 7,Configuring content and be ready for exam day success quickly with this Pass4sure 70 680 practice test practice question. We guarantee it!We make it a reality and give you real 70 680 practice test questions in our Microsoft mcts 70 680 braindumps.Latest 100% VALID Microsoft 70 680 exam Exam Questions Dumps at below page. You can use our Microsoft exam 70 680 braindumps and pass your exam.

Q1. - (Topic 5) 

You use a portable computer that has Windows 7 Enterprise SP1 installed. A conference room at your company has a network projector installed on a server within the company network. 

You need to connect to the projector from your computer. 

What should you do? 

A. From Accessories, click Connect to a Network Projector. 

B. From PowerShell, run the Net Config command. 

C. From Display, click Connect to a projector. 

D. Run the Displayswitch.exe command and select Projector only. 

Answer: A 

Q2. - (Topic 1) 

To which of the following versions and editions of Windows 7 can you directly upgrade a computer running Windows Vista Enterprise (x86)? 

A. Windows 7 Home Professional (x86). 

B. Windows 7 Ultimate (x86) 

C. Windows 7 Ultimate (x64) 

D. Windows 7 Enterprise (x64) 

Answer: B 

Explanation: 

1048 4079 

Windows 7 Upgrade paths: 

http://technet.microsoft.com/en-us/library/dd772579%28v=ws.10%29.aspx 

The only applicable solution is Windows 7 Enterprise (64-bit) as for the following reasons: 

All versions are support Hardware wise. 

Requirements: 

Windows 7 Home Premium, Professional, Ultimate, and Enterprise editions have the following minimum hardware requirements: 

1 GHz 32-bit (x86) or 64-bit (x64) processor 

1 GB of system memory a 40-GB hard disk drive (traditional or SSD) with at least 15 GB of available space a graphics adapter that supports DirectX 9 graphics, has a Windows Display Driver Model (WDDM) driver, Pixel Shader 2.0 hardware, and 32 bits per pixel and a minimum of 128 MB graphics memory XP Mode Windows XP Mode is a downloadable compatibility option that is available for the 

Professional, Enterprise, and Ultimate editions of Windows 7. Windows XP Mode uses the latest version of Microsoft Virtual PC to allow you to run an installation of Windows XP virtually under Windows 7. 

Use all of the installed memory 

The x86 version supports a maximum of 4 GB of RAM, whereas the x64 version supports a maximum of 8 GB of RAM. 

Windows 7 Professional 

Windows 7 Professional is available from retailers and on new computers installed by manufacturers. It supports all the features available in Windows Home Premium, but you can join computers with this operating system installed to a domain. It supports EFS and Remote Desktop Host but does not support enterprise features such as AppLocker, DirectAccess, BitLocker, and BranchCache. 

Windows 7 Enterprise and Ultimate Editions 

The Windows 7 Enterprise and Ultimate editions are identical except for the fact that Windows 7 Enterprise is available only to Microsoft's volume licensing customers, and Windows 7 Ultimate is available from retailers and on new computers installed by manufacturers. The Enterprise and Ultimate editions support all the features available in other Windows 7 editions but also support all the enterprise features such as EFS, Remote Desktop Host, AppLocker, DirectAccess, BitLocker, BranchCache, and Boot from VHD. 

Q3. - (Topic 5) 

You install the Windows Automated Installation Kit (WAIK) for Windows 7 on a computer that runs Windows 7. 

You want to deploy a Windows image (WIM) file to other computers in the domain. 

You need to capture the operating system, computer configuration, and applications installed on the computer to a WIM file. 

What should you do before you capture the image? 

A. Run Defrag.exe. 

B. Run Oscdimg.exe. 

C. Start the computer by using the Windows Preinstallation Environment (WinPE) ram disk. 

D. Run Diskpart.exe. 

Answer: B 

Explanation: Oscdimg is a command-line tool that you can use to create an image (.iso) 

file of a customized 32-bit or 64-bit version of Windows Preinstallation Environment (Windows.PE). You can then burn the .iso file to a CD or DVD. Oscdimg supports ISO.9660, Joliet, and Universal Disk Format (UDF) file systems. Note: … You just created your Windows PE Boot Flash Drive. Now you need to capture a generalized image for deployment. If you would like to burn WindowsPE to a CD instead of a USB thumb drive. The following command will copy all of the files necessary to create a WindowsPE boot disc into an ISO image file. Then you can burn the image file to a CD to create a bootable WindowsPE CD. In the command below the ISO image file that you will want to burn is winpex86.iso Oscdimg -n -bC:\winpe_x86\Etfsboot.com C:\winpe_x86\ISO C:\winpe_x86\winpex86.iso Now burn the ISO image file winpex86.iso to a CD as a bootable image disc and you are finished! 

Q4. - (Topic 1) 

You are creating an unattend answer file for automatic Windows 7 installation. What can you use to do this? Choose two. 

A. The Windows SIM tool in Windows AIK 

B. Microsoft Notepad 

C. The Deployment Workbench MDT tool 

D. Sysprep.exe 

Answer: A,B 

Q5. - (Topic 2) 

You have a computer that runs windows 7. 

The network contains a monitoring server named server1 Computer runs a monitoring service named service1. 

Service 1 uses remote procedure. You need to ensure that service1 can receive requests from server1. 

What should you do? 

A. From windows Firewall with Advanced Security, create a predefined rule. 

B. From windows Firewall with Advanced Security, create custom rule. 

C. From the Network and Sharing Center, modify the network location settings. 

D. From the Network and Sharing Center, modify the advanced sharing settings. 

Answer: B 

Explanation: 

Creating WFAS Rules The process for configuring inbound rules and outbound rules is essentially the same: In the WFAS console, select the node that represents the type of rule that you want to create and then click New Rule. This opens the New Inbound (or Outbound) Rule Wizard. The first page, allows you to specify the type of rule that you are going to create. You can select between a program, port, predefined, or custom rule. The program and predefined rules are similar to what you can create using Windows Firewall. A custom rule allows you to configure a rule based on criteria not covered by any of the other options. You would create a custom rule if you wanted a rule that applied to a particular service rather than a program or port. You can also use a custom rule if you want to create a rule that involves both a specific program and a set of ports. For example, if you wanted to allow communication to a specific program on a certain port but not other ports, you would create a custom rule. 

Q6. - (Topic 3) 

You plan to deploy Windows 7 by using a virtual hard disk (VHD). 

You need to ensure that when a computer starts from the VHD, the Windows 7 installation programs will run the out-of-box-experience (OOBE) portion of the setup. 

What should you do? 

A. Copy install.wim from the Windows 7 installation media to the VHD. 

B. Use ImageX to apply install.wim from the Windows 7 installation media to the VHD. 

C. Start the computer by using the Windows 7 installation media and then select Install now. 

D. Start the computer by using the Windows Preinstallation Environment (Windows PE) and then run Diskprep.exe. 

Answer: B 

Explanation: 

WIM images are file-based and can be installed on a VHD or placed on a network share for distribution. You can store several images in the same WIM file. Talks about Capturing the Installation onto a Network Share, but still applies. You can capture an image of your reference computer by using Windows PE and the ImageX tool. Then you store that image on a network share. Alternatively, on a computer running Windows 7 Enterprise or Ultimate edition, you can store the image on a VHD and make that VHD bootable. To capture the installation image you have created on your reference computer to a network share, perform the following procedure: 

1. Insert your Windows PE media into your reference computer and restart the computer. As before, you may have to override the boot order to boot from the CD/DVD-ROM drive. If so, select the appropriate function key to override the boot order during initial boot. 

2. Windows PE starts and opens a command-prompt window. Use the ImageX tool located on your Windows PE media to capture an image of your reference computer installation. For example, if your optical drive is drive E:, your installation is on drive C:, and you want to capture the image on drive D:, you would enter: e:\imagex.exe /capture C: d:\installationimage.wim "my Win7 Install" /compress fast /verify 

3. Copy the image to a network location. For example, enter: net use y: \\network_share\images copy d:\myimage.wim y: 

4. If necessary, provide network credentials for appropriate network access. Your image is now on volume Y: 

Q7. - (Topic 2) 

You have a computer that runs Windows 7. You attempt to add files to %programfiles%\app1 and receive a prompt to elevate your privileges. You need to ensure that you can add files to %programfiles%\app1 without receiving a prompt for elevated privileges. The solution must prevent harmful applications from making unwanted changed to the system. What should you do? 

A. Enable the built-in administrator account. 

B. Modify the User Account Control (UAC) settings. 

C. Add your user account to the local Power Users group. 

D. Modify the permissions of the %programfiles%\app1 folder. 

Answer: D 

Explanation: In order to secure a computer and its resources, you must consider the rights that users will have. You can secure a computer or multiple computers by granting users or groups specific user rights. You can help secure an object, such as a file or folder, by assigning permissions to allow users or groups to perform specific actions on that object. 

Q8. - (Topic 3) 

You have a Windows 7 computer that is a member of a workgroup. 

You need to prevent members of a local group from starting a specific application. 

You must achieve this goal by using the minimum amount of administrative effort. 

What should you create? 

A. administrative template 

B. application control policy 

C. IPSec policy 

D. software restriction policy 

Answer: B 

Explanation: 

AppLocker Application Control Policies AppLocker is a feature new to Windows 7 that is available only in the Enterprise and Ultimate editions of the product. AppLocker policies are conceptually similar to Software Restriction Policies, though AppLocker policies have several advantages, such as the ability to be applied to specific user or group accounts and the ability to apply to all future versions of a product. Hash rules apply only to a specific version of an application and must be recalculated whenever you apply software updates to that application. AppLocker policies are located in the Computer Configuration\Windows Settings\ Security Settings\Application Control Policies node of a standard Windows 7 or Windows Server 2008 R2 GPO. 

AppLocker relies upon the Application Identity Service being active. When you install Windows 7, the startup type of this service is set to Manual. When testing AppLocker, you should keep the startup type as Manual in case you configure rules incorrectly. In that event, you can just reboot the computer and the AppLocker rules will no longer be in effect. Only when you are sure that your policies are applied correctly should you set the startup type of the Application Identity Service to Automatic. You should take great care in testing AppLocker rules because it is possible to lock down a computer running Windows 7 to such an extent that the computer becomes unusable. AppLocker policies are sometimes called application control policies. 

Q9. HOTSPOT - (Topic 4) 

A company has client computers that run Windows 7. You set up a virtual private network (VPN) infrastructure that uses a preshared key for authentication. 

You need to create the VPN connection on the client computers. 

Which setting should you choose? (To answer, select the appropriate setting in the work area.) 

Answer: 

Q10. - (Topic 1) 

You have a computer that runs Windows 7. 

You discover that an application named App1 runs during the startup process. 

You need to prevent only App1 from running during startup. Users must be allowed to run App1 manually. 

What should you do? 

A. From the local Group Policy, modify the application control policy. 

B. From the local Group Policy, modify the software restriction policy. 

C. From the System Configuration tool, select Diagnostic Startup. 

D. From the System Configuration tool, modify the Startup applications. 

Answer: D