300-075 Exam Questions - Online Test


300-075 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

certleader.com

Pass4sure offers free demo for 300 075 pdf exam. "CIPTV2 Implementing Cisco IP Telephony and Video, Part 2", also known as 300 075 dump exam, is a Cisco Certification. This set of posts, Passing the Cisco 300 075 dump exam, will help you answer those questions. The 300 075 ciptv2 Questions & Answers covers all the knowledge points of the real exam. 100% real Cisco 300 075 dump exams and revised by experts!

P.S. Top Quality 300-075 software are available on Google Drive, GET MORE: https://drive.google.com/open?id=1wjr6WINeoF1GfJJTEUwbsPxy_oz_OK6s


New Cisco 300-075 Exam Dumps Collection (Question 6 - Question 15)

Q1. Which three options are overlapping parameters for roaming when a device is configured for

Device Mobility? (Choose three.)

A. device pool

B. location

C. network locale

D. codec

E. MRGL

F. extension

Answer: B,C,E

Explanation:

The overlapping parameters for roaming-sensitive settings are Media Resource Group List, Location, and Network Locale. The overlapping parameters for the Device Mobility-related settings are Calling Search Space (called Device Mobility Calling Search Space at the device pool), AAR Group, and AAR Calling Search Space. Overlapping parameters configured at the phone have higher priority than settings at the home device pool and lower priority than settings at the roaming device pool.

Reference: https://supportforums.cisco.com/document/77096/device-mobility


Q2. Which component provides a list of Cisco Unified Communications Manager node addresses that allow the phone to register to the cluster?

A. DNS option 150

B. DHCP option 150

C. DHCP option 66

D. configuration file from TFTP server

E. Primary Cisco Unified Communications Manager node from configuration file additional nodes during registration.

Answer: B


Q3. Which two statements regarding IPv4 Static NAT address 209.165.200.230 has been configured on a VCS Expressway are true? (Choose two.)

A. The Advanced Networking or Dual Network Interfaces option key has been installed.

B. VCS rewrites the Layer 3 source address of outbound SIP and H.323 packets to 209.165.200.230.

C. VCS applies 209.165.200.230 to outbound SIP and H.323 payload messages.

D. With static NAT enabled on the LAN2 interface, VCS applies 209.165.200.230 to outbound H.323 and SIP payload traffic exiting the LAN1 interface.

Answer: A,C


Q4. Which three devices or applications support call preservation? (Choose three.)

A. a software conference bridge

B. Cisco Unified IP Phone 7962G

C. an annunciator

D. SIP trunks

E. JTAPI applications

F. TAPI applications

G. CTI applications

H. third-party H.323 endpoints

Answer: A,B,D

Explanation: Reference: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/9_0_1/CUCM_BK_CD2 F83FA

_00_cucm-system-guide-90/CUCM_BK_CD2F83FA_00_systemguide_chapter_01011.html#CUCM_RF_C98194B0_ 00


Q5. Which three commands are necessary to override the default CoS to DSCP mapping on interface Fastethernet0/1? (Choose three.)

A. mls qos map cos-dscp 0 10 18 26 34 46 48 56

B. mls qos map dscp-cos 8 10 to 2

C. mls qos

D. interface Fastethernet0/1 mls qos trust cos

E. interface Fastethernet0/1 mls qos cos 1

F. interface Fastethernet0/2 mls qos cos 1

Answer: A,C,D


Q6. An engineer is configuring Global Dial Plan Replication and wants to prevent the local cluster from routing the Vice President number 5555555555 to the remote cluster. Which action accomplishes this task?

A. Create a block route pattern.

B. Create a block learned pattern.

C. Create a block transformation pattern.

D. Create a block translation pattern.

Answer: C


Q7. Which component of Cisco Unified Communications Manager is responsible for sending keepalive messages to the Service Advertisement Framework forwarder?

A. Call Control Discovery requesting service

B. Hosted DNs service

C. Service Advertisement Framework client control

D. Cisco Unified Communications Manager database

E. Service Advertisement Framework-enabled trunk

F. gatekeeper

Answer: C


Q8. Which three globalization dialing functions are enhanced in Cisco Unified Communications Manager 7.x and later? (Choose three.)

A. MGRL

B. HO

C. CER

D. AAR

E. SAF

F. click-to-call

Answer: B,C,E

Explanation: Reference: http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/srnd/9x/uc9x/dialplan.html (benefits of new design approach)


Q9. Refer to the exhibit.

If an IP phone in San Jose roams to New York, which two IP phone settings will be modified by Device Mobility so that the phone can place and receive calls in New York? (Choose two.)

A. The physical locations are not different, so the configuration of the phone is not modified.

B. The physical locations are different, so the roaming-sensitive parameters of the roaming device pool are applied.

C. The device mobility groups are the same, so the Device Mobility-related settings are applied in addition to the roaming-sensitive parameters.

D. The Device Mobility information is associated with one or more device pools other than the home device pool of the phone, so one of the associated device pools is chosen based on a round-robin load-sharing algorithm.

E. The Device Mobility information is associated with the home device pool of the phone, so the phone is considered to be in its home location. Device Mobility will reconfigure the roaming-sensitive settings of the phone.

Answer: B,C


Q10. When video endpoints register with Cisco Unified Communications Manager, where are DSCP values configured?

A. in Unified CM, under Enterprise Parameters Configuration

B. in Unified CM, under Device > Device Settings > Device Defaults

C. in Unified CM, under Service Parameters > Cisco CallManager Service > Cluster-wide Parameters

D. DSCP parameters are always configured on each individual video endpoint.

Answer: C


Recommend!! Get the Top Quality 300-075 dumps in VCE and PDF From Thedumpscentre, Welcome to download: http://www.thedumpscentre.com/300-075-dumps/ (New 420 Q&As Version)