300-075 Exam Questions - Online Test

300-075 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

Act now and download your Cisco 300 075 pdf test today! Do not waste time for the worthless Cisco 300 075 ciptv2 tutorials. Download Refresh Cisco Implementing Cisco IP Telephony and Video, Part 2 (CIPTV2) exam with real questions and answers and begin to learn Cisco 300 075 ciptv2 with a classic professional.

Q81. Which three commands are necessary to override the default CoS to DSCP mapping on interface Fastethernet0/1? (Choose three.) 

A. mls qos map cos-dscp 0 10 18 26 34 46 48 56 

B. mls qos map dscp-cos 8 10 to 2 

C. mls qos 

D. interface Fastethernet0/1mls qos trust cos 

E. interface Fastethernet0/1mls qos cos 1 

F. interface Fastethernet0/2mls qos cos 1 

Answer: A,C,D 

Q82. Refer to the exhibit. 

The exhibit shows centralized Cisco Unified Communications Manager configuration components for TEHO calls to U.S. area code 408 from the U.K. The PSTN access code for the U.K. is 9 and 001 for international calls to the U.S. What should the TEHO-US route list configuration consist of? 

A. First route group should point only to the U.K. gateway. The second route group should point to the U.S. gateway. 

B. First route group should be only the local route group. The second route group should point to the U.S. gateway. 

C. First route group should point only to the U.S. gateway. The second route group should be the local route group. 

D. The TEHO-US route list should contain only the local route group. The globalized configuration means that the appropriate gateway will be selected automatically. 

E. The \+! route pattern should point directly to the U.S. gateway. 

Answer: C 

Explanation: 

Incorrect Answer: A, B, D The route group points to one or more gateways and can choose the gateways for call routing based on preference. The route group can serve as a trunk group by directing all calls to the primary device and then using the secondary devices when the primary is unavailable. One or more route lists can point to the same route group. Link: 

http://www.ciscosystems.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmsys/a08 gw.html#wp1167274 

Q83. Which command can be used to manually send the MGCP gateway to register with the secondary Cisco Unified Communications Manager server? 

A. ccm-manager switchover-to-backup 

B. mgcp use backup 

C. ccm-manager register backup 

D. not supported 

Answer: A 

Q84. Which three options are supplementary services that are affected by MTP? (Choose three.) 

A. Call Hold 

B. Call Transfer 

C. Call Park 

D. Call Pickup 

E. Speed Dial 

F. Call Back 

Answer: A,B,C 

Q85. You have been asked to deploy Cisco Extension Mobility Cross Cluster for a distributed call processing environment. During the initial extension mobility login request, how does the visiting cluster determine if the user is a local user or a remote user? 

A. by using a third-party automatic provisioning tool to verify user ID 

B. by broadcasting a request to all clusters to verify the user type 

C. from user IDs that are created by default when the user logs in 

D. by using Extension Mobility Cross Cluster Session Initiation Protocol (SIP) trunks 

E. by verifying against the local database 

F. by verifying the visiting Trivial File Transfer Protocol 

Answer: E 

Q86. Refer to the exhibit 

When the Cisco Unified Communications Manager advertises the Hosted DN Pattern, which pattern would be advertised? 

A. 2XXX and the T0D1D will be 0:+498950555 

B. 2XXX and the ToDID will be 0:+4989531 21 

C. 4989S05552XXX and the ToDiD will be 0: 

D. + 4989631 21 2XXX and the ToDiD will be 0: 

E. Both +4989505552XXXand +4989531 21 2XXX will be advertised with ToDID of 0: 

Answer: A 

Explanation: 

Incorrect Answer: B, C, D, E PSTN failover prepend digit is +498950555 Link: 

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_2/ccmfeat/fscallcontrol discovery.html 

Q87. Which two options must be selected in the SIP Trunk Security Profile configuration between Cisco Unified Communications Manager and Expressway? (Choose two) 

A. Enable application-level authorization 

B. Accept presence subscription 

C. Accept out-of-dialog refer 

D. Accept unsolicited notification 

E. Accept replaces header 

F. Transmit security status 

G. Allow charging header 

Answer: D,E 

Q88. Which three commands are mandatory to implement SRST for five Cisco IP Phones? (Choose three.) 

A. call-manager-fallback 

B. max-ephones 

C. keepalive 

D. limit-dn 

E. ip source-address 

Answer: A,B,E 

Q89. Scenario 

There are two call control systems in this item. The Cisco UCM is controlling the DX650, the Cisco Jabber for Windows Client, and the 9971 Video IP Phone. The Cisco VCS is controlling the SX20, the Cisco TelePresence MCU, and the Cisco Jabber TelePresence for Windows. 

Use the exhibits to answer the following questions. 

SX20 System Information 

DX650 Configuration 

MRGL 

DP 

Locations 

AARG 

CSS 

Movi Failure 

Movi Settings 

What two issues could be causing the Cisco Jabber Video for TelePresence failure shown in the exhibit? (Choose two.) 

A. Incorrect username and password 

B. Wrong SIP domain configured. 

C. User is not associated with the device. 

D. IP or DNS name resolution issue. 

E. CSF Device is not registered. 

F. IP Phone DN not associated with the user. 

Answer: B,D 

Q90. Refer to the exhibit. 

The HQ site uses area code 650. The BR1 site uses area code 408. The long distance national code for PSTN dialing is 1. To make a long distance national call, an HQ or BR1 user dials access code 9, followed by 1, and then the 10-digit number. 

Both sites use MGCP gateways. AAR must use globalized call routing using a single route pattern. Assume that all outgoing PSTN numbers are localized at the egress gateway as shown in the exhibit. 

Which partition should be configured in the AAR CSS applied at the phones? 

A. PSTN partition 

B. LD partition 

C. The HQ AAR CSS must include a partition assigned to route pattern 91408XXXXXXX. The BR1 AAR CSS must include a partition assigned to route pattern 91650XXXXXXX. 

D. AAR CSS must contain translation pattern 9.1[2-9]XX[2-9]XXXXXX for each site that must be globalized. Otherwise the called numbers will not be localized at the egress gateway. 

Answer: A