A Review Of Pinpoint 300-075 exam dumps

300-075 Dumps

300-075 Exam Questions - Online Test

300-075 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

It is impossible to pass Cisco 300 075 vce exam without any help in the short term. Come to Certleader soon and find the most advanced, correct and guaranteed Cisco 300 075 dump practice questions. You will get a surprising result by our Renew CIPTV2 Implementing Cisco IP Telephony and Video, Part 2 practice guides.

P.S. Simulation 300-075 vce are available on Google Drive, GET MORE: https://drive.google.com/open?id=1bM34MPZHJhwuG5bvDsAvoAwjKkgB_mmF

New Cisco 300-075 Exam Dumps Collection (Question 7 - Question 16)

Question No: 7

Which action configures the registration of transcoder resources?

A. Cisco IOS software registers transcoder resources with SIP.

B. Cisco IOS software registers transcoder resources with SCCP.

C. Cisco IOS software registers transcoder resources with H.323.

D. Cisco IOS software does not register transcoder resources.

Answer: B

Question No: 8

Refer to the exhibit

When the Cisco Unified Communications Manager advertises the Hosted DN Pattern, which pattern would be advertised?

A. 2XXX and the T0D1D will be 0:+498950555

B. 2XXX and the ToDID will be 0:+4989531 21

C. 4989S05552XXX and the ToDiD will be 0:

D. + 4989631 21 2XXX and the ToDiD will be 0:

E. Both +4989505552XXXand +4989531 21 2XXX will be advertised with ToDID of 0:

Answer: A

Explanation: Incorrect: BCDE PSTN failover prepend digit is +498950555 Link:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_0_2/ccmfeat/fscallcontrol discovery.html

Question No: 9

How does the system intelligently shift call processing upon restoration of WAN connectivity?

A. automatically back to the primary Cisco Unified Communications Manager cluster

B. manually back to the primary Cisco Unified Communications Manager cluster

C. automatically back to the secondary Cisco Unified Communications Manager cluster

D. manually back to the secondary Cisco Unified Communications Manager cluster

Answer: A

Question No: 10

In what Cisco solution is Simple Network-Enabled Auto Provision technology used?

A. Cisco Unified Gateway Duplication

B. Cisco Unified CallManager Redundancy

C. Cisco Unified SRST

D. Cisco Unified Call Survivability

Answer: C

Explanation: Incorrect: ABD

When the system automatically detects a failure, Cisco Unified SRST uses Simple Network Auto Provisioning (SNAP) technology to auto-configure a branch office router to provide

call processing for the Cisco Unified IP phones that are registered with the router Link:

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmesr st.html

Question No: 11

Refer to the following exhibit.

The MGCP gateway has the following configurations:

called party transformation CSS HQ_cld_pty CSS (partition=HQ cld_pty.Pt) call.ng party transformation CSS HQ_clng_pty CSS (partition=HQ_clng_pty Pt)

All translation patterns have the check box "Use Calling Party's External Phone Number Mask" enabled.

When the IP phone at extension 3001 places a call to 9011 49403021 56001# what is the resulting called and calling number that is sent to the PSTN?

A. The called number is 01 1 49403021 56001. The calling number will be 5553001 and number type set to subscriber.

B. The called number is 011 49403021 56001. The calling number will be 5215553001 and number type set to national.

C. The called number is 4940302156001 with number type set to international. The calling number will be 5215553001 and number type set to national.

D. The called number is +49403021 56001 with number type set to international. The calling number will be 5215553001 and number type set to subscriber.

Answer: A

Explanation: Incorrect: BCD

Check the check box "Use Calling Party's External Phone Number Mask" if you want the full, external phone number to be used for calling line identification (CLID) on outgoing

calls. You may also configure an External Phone Number Mask on all phone devices. Link:

http://www.cisco.com/en/US/products/sw/voicesw/ps556/products_tech_note09186a00805 b6f33.shtml

Question No: 12

Refer to the exhibit.

Multicast MOH needs to be run from flash at the remote site. Which Cisco IOS configuration at the SRST router is correct?

call-manager-fallback

ip source-address 10.1.5.102 port 2000

max-ephones 2

max-dn 8 dual-line moh music-on-hold au

multicast moh 239.1.1.1 port 16384

call-manager-fallback

ip source-address 10.1.5.102 port 2000

max-ephones 2

max-dn 8 dual-line moh music-on-hold au

multicast moh 239.1.1.1 port 163t

call-manager-fallback

ip source-address 10.1.120.1 port 2000 max-ephones 2

max-dn 8

moh music-on-hold.au

multicast moh 239.1.1.1 port 32767

call-manager-fallback

ip source-address 10.1.5.102 port 2000

max-ephones 2

max-dn 8 dual-line moh music-on-hold an

multicast moh 239.1.1.1 port 32767

Answer: A

Explanation: Incorrect: BCD

following configuration will required to Enable Multicast MOH on the Cisco SRST Gateway 1.

ccm-manager music-on-hold 2.

interface loopback number

ip address ip-address mask

exit 5.

interface fastethernet slot/port

exit 8.

call-manager-fallback 9.

ip source-address ip-address [port port] 10.

max-ephones max-phones

11.

max-dn max-directory-number

12.

moh filename

13.

multicast moh multicast-address port port [route ip-address-list]

14.

exit

Question No: 13

Which minimum configuration is needed for the SAF Internal Client to register with this SAF Forwarder?

A. router eigrp SAF

service-family ipv4 autonomous-system 1

topology base exit-sf-topology exit-service-family

voice service saf profile trunk-route 1

session protocol sip interface Loopbackl transport tcp port 5060 i

B. router eigrp SAF

service-family ipv4 autonomous-system 1

topology base exit-sf-topology exit-service-family

voice service saf profile trunk-route 1

session protocol sip interface Loopbackl transport tcp port 5060

profile dn-block 1 alias-prefix 1972555 pattern 1 type extension 4xxx

profile callcontrol 1 dn-service

trunk-route 1

dn-block 1

dn-block 2 i

C. router eigrp SAF

service-family ipv4 autonomous-system 1

topology base exit-sf-topology exit-service-family

voice service saf profile trunk-route 1

session protocol sip interface Loopbackl transport tcp port 5060

profile dn-block 1 alias-prefix 1972555 pattern 1 type extension 4xxx

profile callcontrol 1 dn-service

trunk-route 1

dn-block 1

dn-block 2

channel 1 vrouter SAF asystem 1 subscribe callcontrol wildcarded publish callcontrol 1

D. router eigrp SAF

service-family ipv4 autonomous-system 1

topology base exit-sf-topology exit-service-family

voice service saf

channel 1 vrouter SAF asystem 1

E. router eigrp SAF

service-family ipv4 autonomous-system 1

topology base exit-sf-topology exit-service-family i

Answer: A

Question No: 14

Which option describes the reason that transcoding resources are added in Cisco Unified Communications Manager?

A. to enable transcoding resources in a Cisco Unified Communications Manager server

B. to enable Cisco Unified Communications Manager to select the optimal single codec for end-to-end calls

C. to enable transcoding resources in Cisco IP Phones

D. to provide transcoding resources in Cisco IOS gateways to Cisco Unified Communications Manager

Answer: D

Question No: 15

When an incoming PSTN call arrives at an MGCP gateway, how does the calling number get normalized to a global E.164 number with the + prefix in Cisco Unified Communications Manager?

A. Normalization is done using translation patterns.

B. Normalization is done using route patterns.

C. Normalization is done using the gateway incoming called party prefixes based on number type.

D. Normalization is done using the gateway incoming calling party prefixes based on number type.

E. Normalization is achieved by local route group that is assigned to the MGCP gateway.

Answer: D

Explanation: Incorrect: ABCE

Configuring calling party normalization alleviates issues with toll bypass where the call is

routed to multiple locations over the IP WAN. In addition, it allows Cisco Unified Communications Manager to distinguish the origin of the call to globalize or localize the calling party number for the phone user.

Link: http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fscallpn.html

Question No: 16

Which action configures AAR to route the calls that have been rejected by the gatekeeper CAC through the PSTN?

A. Configure Cisco IP Phones for AAR.

B. Configure AAR to work with SRST.

C. Configure AAR to work with CTI route points.

D. This configuration is not possible using AAR.

Answer: D

Recommend!! Get the Simulation 300-075 dumps in VCE and PDF From Surepassexam, Welcome to download: https://www.surepassexam.com/300-075-exam-dumps.html (New 245 Q&As Version)