NEW QUESTION 1
Refer to the graphic. Two peering routers are running RIP. RTA is using RIPv2 to advertise its routes, whileRTB is using RIPv1 to advertise the route 1.1.1.1/32. The administrator configures “RIP version 2 multicast” forinterface G0/0/1 of RTB. How will the route 1.1.1.1/32 appear in the the IP routing table of RTA?

• A. This route will not appear in the IP routing table of RTA.
• B. This route will appear in the IP routing table of RTA as 1.0.0.0/8.
• C. This route will appear in the IP routing table of RTA as 1.0.0.0/24.
• D. This route will appear in the IP routing table of RTA as 1.0.0.0/32.

Answer: D

NEW QUESTION 2
Refer to the graphic. RTA and RTB are connected to the same Frame Relay switch and use same DLCInumber, which following is correct?(Choose two).

• A. RTA and RTB must be associated with the same PVC
• B. RTA and RTB can be associated with different PVC’s
• C. The DLCI on the different physical interfaces can be the same
• D. The DLCI on the different physical interfaces cannot be the same

Answer: BC

NEW QUESTION 3
An Ethernet frame is captured by network protocol analyzer tool and the value of
Type/Length field is0x0800.Which of the following statements about the frame are correct?(Choose two)

• A. The frame structure of the frame is Ethernet_II
• B. The frame structure of the frame is 802.3
• C. Its upper layer protocol is IP
• D. Its upper layer protocol is IPX

Answer: AC

NEW QUESTION 4
How many domains can be configured on a Huawei router?

• A. 30
• B. 31
• C. 32
• D. 33

Answer: A

NEW QUESTION 5
An authenticator router has been configured with two domains named “Area1” and “Area2”, following which auser is created with the username “huawei” and the password ”hello” for authentication. Which domain doesthis user belongs to?
<choice ident=“A”>
<choice ident=“B”>
<choice ident=“C”>
<choice ident=“D”>

• A. Area1 domain
• B. Area2 domain
• C. default domain
• D. default_admin domain

Answer: C

NEW QUESTION 6
What is the meaning of 200 in the command "fr map ip 10.1.1.2 200"?

• A. remote logical channel ID
• B. local DLCI
• C. remote interface ID
• D. remote node ID

Answer: B

NEW QUESTION 7
Which of the following are routed protocols?(Choose two)

• A. IP
• B. OSPF
• C. BGP
• D. IPX

Answer: AD

NEW QUESTION 8
Which of the following statements regarding the router ID in OSPF are incorrect?(Choose three)

• A. The router IDs of OSPF routers in the same area must be the same, but can be different in different areas.
• B. The router ID must be the IP address of an OSPF router interface.
• C. The router ID must be configured manually.
• D. A router running OSPF must have a router ID for it to operate properly.

Answer: ABC

NEW QUESTION 9
The administrator wishes to change name of the router. Under which view should the administrator be in orderto achieve this?

• A. User-view
• B. System-view
• C. Interface-view
• D. Protocol-view

Answer: B

NEW QUESTION 10
Refer to the graphic. IPsec VPN uses ESP to encrypt which fields?

• A. TCP, Data and ESP Trailer
• B. ESP, TCP and Data
• C. ESP, TCP, Data and ESP Trailer
• D. ESP, TCP, Data, ESP Trailer and ESP Auth

Answer: A

NEW QUESTION 11
Router] ip pool pool1
[Router-ip-pool-pool1] network 10.10.10.0 mask 255.255.255.0
[Router-ip-pool-pool1] gateway-list 10.10.10.1 [Router-ip-pool-pool1] quit
[Router] ip pool pool2
[Router-ip-pool-pool2] network 10.20.20.0 mask 255.255.255.0
[Router-ip-pool-pool2] gateway-list 10.20.20.1 [Router-ip-pool-pool2] quit
[Router] interface GigabitEthernet 0/0/1
[Router-GigabitEthernet0/0/1] ip address 10.10.10.1 24 [Router-GigabitEthernet0/0/1] dhcp select global
Refer to the configuration output. Following configuration, a host is connected to the interface Gigabit Ethernet0/0/1 of the router. Which IP address will the client obtain?
<choice ident=“A”>
<choice ident=“B”>
<choice ident=“C”>
<choice ident=“D”>

• A. An IP address from network 10.10.10.0/24 will be assigned.
• B. An IP address from network 10.20.20.0/24 will be assigned.
• C. The host will be unable to obtain an IP address.
• D. An IP address may be assigned from either 10.10.10.0/24 or 10.20.20.0/24.

Answer: A

NEW QUESTION 12
Which of the following statements describes the network shown?(Choose two)

• A. There are 6 collision domains in the network.
• B. There are 2 broadcast domains in the network.
• C. There are 4 collision domains in the network.
• D. There are 6 broadcast domains in the network.

Answer: BC

NEW QUESTION 13
Which of the following entries is not included in the routing table?

• A. source address
• B. next hop
• C. destination address
• D. cost

Answer: A

NEW QUESTION 14
Assume that the router has learnt the best route to the same destination by using RIP, OSPF and Static Routerespectively. By default, the Huawei router will select the route learnt via ( ) as the best route.

• A. RIP
• B. OSPF
• C. RIPv2
• D. Static route

Answer: B

NEW QUESTION 15
Refer to the graphic. In order to improve security, the two hosts use IPsec VPN to transmit data. Which IPsecmode and protocol can be used to hide the host’s IP address?(Choose two).

• A. AH
• B. transport mode
• C. tunnel mode
• D. ESP

Answer: CD

NEW QUESTION 16
An administrator connects two switches together in a local enterprise network. The ports of one switch supportFast Ethernet, while the ports of the other switch support Gigabit Ethernet. Hosts connected to one switch areable to communicate, however communication between the two switches fails. What is the possible reason forthis?

• A. The ports have disabled auto-negotiation.
• B. One port is supporting auto-negotiation, while auto-negotiation is disabled on the port of the other switch.
• C. The port of one switch is operating using half duplex mode, while the port of the other switch is using fullduplex mode.
• D. A Fast Ethernet port cannot communicate directly with a Gigabit Ethernet port.

Answer: A

NEW QUESTION 17
Ping 10.0.0.2: 56 data bytes, press CTRL_C to break
Reply from 10.0.0.2: bytes=800 Sequence=1 ttl=255 time=2 ms
Reply from 10.0.0.2: bytes=800 Sequence=2 ttl=255 time=10 ms
--- 10.0.0.2 ping statistics --- 2 packet(s) transmitted
2 packet(s) received
0.00% packet loss
round-trip min/avg/max = 2/6/10 ms
A network administrator uses the ping command to test connectivity to the destination
10.0.0.2 on a HuaweiAR series router. Which statement regarding the output is correct?

• A. The network administrator used the command ping -c 2 -s 800 10.0.0.2
• B. The network administrator used the command ping -a 2 -v 800 10.0.0.2
• C. The path between the source and destination is not OK.
• D. The network administrator changed the default TTL value.

Answer: A

NEW QUESTION 18
Two end stations in a point-to-point network perform address resolution. Which of the following statements iscorrect?

• A. The destination address of an ARP request from each station will be a unicast MAC address.
• B. The destination address of an ARP request from each station will be a broadcast IP address.
• C. The destination address of an ARP reply from each station will be a unicast MAC address
• D. The destination address of an ARP reply from each station will be a broadcast MAC address.

Answer: C

NEW QUESTION 19
OSPF allows for “multiple” processes. By default, OSPF selects a process whose number is ( ).

• A. 1
• B. 10
• C. 100

Answer: B