NEW QUESTION 1
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
Your network contains Windows and non-Windows devices.
You have a DHCP server named Server1 that has an IPv4 scope named Scope1.
You need to prevent a client computer that uses the same name as an existing registration from updating the registration.
What should you do?

• A. From the properties of Scope1, modify the Conflict detection attempts setting.
• B. From the properties of Scope1, configure Name Protection.
• C. From the properties of IPv4, configure the bindings.
• D. From IPv4, create a new filter.
• E. From the properties of Scope1, create an exclusion range.
• F. From IPv4 run the DHCP Policy Configuration Wizard.
• G. From Control Panel, modify the properties of Ethernet.
• H. From Scope1, create a reservation.

Answer: B

NEW QUESTION 2
Your network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server2 that runs Windows Server 2021.
Server2 has 10 IPv4 scopes.
You need to ensure that the scopes are backed up every 30 minutes to the folder D:DHCPBackup. What should you run?

• A. dism.exe
• B. dns.exe
• C. dnscmd.exe
• D. netsh.exe
• E. Set-DhcpServerDatabase
• F. Set-DhcpServerv4DnsSetting
• G. Set-DhcpServerv6DnsSetting
• H. Set-DNSServerSetting

Answer: E

NEW QUESTION 3
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a DHCP server named Server1. All client computers run Windows 10 and are configured as DHCP clients.
Your helpdesk received calls today from users who failed to access the network from their Windows 10 computer.
You open the DHCP console as shown in the exhibit.

You need to ensure that all of the Windows 10 computers can receive a DHCP lease.
Solution: You authorize the server. Does this meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 4
You company has a main office in London. The company has 1,000 users who are located in many countries. You plan to deploy a large remote access solution for the company.
The London office has three servers named Server1, Server2, and Server3 that run Windows Server 2021. You plan to use Server1 as a VPN server, Server2 as a RADIUS proxy, and Server3 as a RADIUS server. You need to configure Server2 to support the planned deployment.
Which three actions should you perform on Server2? Each correct answer presents part of the solution.

• A. Create a connection request policy.
• B. Deploy a Windows container.
• C. Add a RADIUS client.
• D. Create a network policy.
• E. Create a remote RADIUS server group.

Answer: ACE

Explanation: https://ittrainingday.com/2014/01/03/how-to-configure-radius-proxy-servers/

NEW QUESTION 5
Your network contains an Active Directory domain named contoso.com. The domain contains a Hyper-V host. You are deploying Software Defined Network (SDN) by using Windows Server 2021.
You deploy a virtual machine that runs Windows Server 2021, and you install the Network Controller server role.
You need to configure the virtual machine as the network controller. What should you do?

• A. Run the Install-NetworkControllerCluster cmdlet and set ClientAuthentication to X509.
• B. Run the Install-NetworkController cmdlet and set ClientAuthentication to None.
• C. Run the Install-NetworkControllerCluster cmdlet and set ClientAuthentication to None.
• D. Run the Install-NetworkController cmdlet and set ClientAuthentication to Kerberos.

Answer: D

Explanation: References: https://github.com/MicrosoftDocs/windowsserverdocs/blob/master/WindowsServerDocs/networking/sdn/deploy

NEW QUESTION 6
You have a virtual machine named VM1 that runs windows Server 2021. VM1 hosts a service that requires high network throughput.
VM1 has a virtual network adapter that connects to a Hyper-V switch named vSwitch1 has one network adapter. The network adapter supports Remote Direct Memory Access (RDMA), the single root I/O virtualization (SR-IOV) interface. Quality of Service (QoS), and Receive Side Scaling (RSS).
You need to ensure that the traffic from VM1 can be processed by multiple networking processors. Which Windows PowerShell command should you run on the host of VM1?

• A. Set-NetAdapterRss
• B. Set-NetAdapterRdma
• C. Set-NetAdapterSriov
• D. Set-NetAdapterQos

Answer: A

NEW QUESTION 7
You have a remote access server named Server1 that runs Windows Server 2021. Server1 has DirectAccess enabled.
You have a proxy server named Server2. All computers on the internal network connect to the Internet by using the proxy.
On Server1, you run the command Set-DAClient -forceTunnel Enabled.
You need to ensure that when a DirectAccess client connects to the network, the client accesses all the Internet resources through the proxy.
What should you run on Server1?

• A. Set-DnsClientGlobalSetting
• B. Set-DAEntryPoint
• C. Set-DnsClientNrptRule
• D. Set-DnsClientNrptGlobal

Answer: B

NEW QUESTION 8
You have a server named Server1 that runs Windows Server 2021. Server1 has the DHCP Server and the Windows Deployment Service server roles installed.
Server1 is located on the same subnet as client computers.
You need to ensure that clients can perform a PXE boot from Server1.
Which two IPv4 options should you configure in DHCP? Each correct answer presents part of the solution.

• A. 003 Router
• B. 066 Boot Server Host Name
• C. 015 DNS Domain Name
• D. 006 DNS Servers
• E. 060 Option 60

Answer: BE

NEW QUESTION 9
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution. Determine whether the solution meets the stated goals.
Your network contains an Active Directory domain named contoso.com. The domain contains a DNS server named Server1. All client computers run Windows 10.
On Server1, you have the following zone configuration.

You have the following subnets defined on Server1.

You need to prevent Server1 from resolving queries from DNS clients located on Subnet4. Server1 must resolve queries from all other DNS clients.
Solution: From Windows Firewall with Advanced Security on Server1, you create an inbound rule. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: https://technet.microsoft.com/en-us/library/dd421709(v=ws.10).aspx

NEW QUESTION 10
You have a test environment that includes two servers named Server1 and Server2. The severs run Windows Server 2021. You need to ensure that you can implement SMB Direct between the servers. Which feature should the servers support?

• A. (RDMA)
• B. Multipath I/O (MPIO)
• C. virtual machine queue (VMQ)
• D. single root I/O virtualization (SR-IOV)

Answer: A

Explanation: https://technet.microsoft.com/en-us/library/jj134210%28v=ws.11%29.aspx?f=255&MSPPError=-2147217396

NEW QUESTION 11
Your network contains an Active Directory domain named contoso.com. The domain contains a domain-based Distributed File System (DFS) namespace named Namespace1. Namespace1 has the following configuration.

Namespace1 has a folder named Folder1.
Folder1 has the targets shown in the following table.

You have the site links shown in the following table.

For each of the following statements, select Yes if the statement is true. Otherwise, select No.

Answer:

Explanation: https://ittutorials.net/microsoft/windows-server-2021/configure-dfs/

NEW QUESTION 12
Your network contains an Active Directory forest named contoso.com. The forest has three sites named Site1, Site2 and Site3.
Distributed File System (DFS) for the forest is configured as shown in the exhibit.

The forest contains a server named Server2 that hosts the DFS namespace.
\Contoso.comNamespace1Folder2 has the following configuration.

\ContosoNamespace1Folder2 has the targets configured as shown in the following table.

For each of the following statement, Select Yes if Statement is true. Otherwise, select No.

Answer:

Explanation:

NEW QUESTION 13
You have Hyper-V host named Server1.
Server1 has a network adapter that has virtual machine queue (VMQ) enabled. The network adapter connects at 10 Gbps and has an IPv4 address.
Server1 hosts a virtual machine named VM1. VM1 has a single network adapter and four processors. You need to distribute the network processing load across the VM1 processors.
What should you do?

• A. From Device Manager on Server1, configure TCP Checksum Offload (IPv4).
• B. From Device Manager on VM1, configure TCP Checksum Offload (IPv4).
• C. From Device Manager on VM1, configure Receive Side Scaling.
• D. From Windows PowerShell on Server1, run the Enable-NetAdapterRSS cmdlet.

Answer: C

NEW QUESTION 14
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You network contains an Active Directory domain named contoso.com. The domain contains a member server named Server1 that runs Windows Server 2021 and has the DNS Server role installed. Automatic scavenging of state records is enabled and the scavenging period is set to 10 days.
All client computers dynamically register their names in the contoso.com DNS zone on Server1.
You discover that the names of multiple client computers that were removed from the network several weeks ago can still be resolved.
You need to configure Server1 to automatically remove the records of the client computers that have been offline for more than 10 days.
Solution: You set the Expires after value of the zone. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: https://technet.microsoft.com/en-us/library/cc772069(v=ws.11).aspx

NEW QUESTION 15
Your company has 5,000 users who work remotely.
You have 40 VPN servers that host the remote connections for the users. You plan to deploy a RADIUS solution that contains five RADIUS servers.
You need to ensure that client authentication requests are distributed evenly between the five RADIUS servers.
What should you do?

• A. Install the Network Load Balancing role service on all of the RADIUS serve
• B. Configure all of the RADIUS clients to connect to a virtual IP address.
• C. Deploy RAS Gateway to a new serve
• D. Configure all of the RADIUS clients to connect to RAS Gateway.
• E. Install the Failover Clustering role service on all of the RADIUS server
• F. Configure all of the RADIUS clients to connect to the IP address of the cluster.
• G. Deploy a RADIUS proxy to a new serve
• H. Configure all of the RADIUS clients to connect to the RADIUS proxy.

Answer: D

Explanation: https://technet.microsoft.com/en-us/library/dd197433(v=ws.10).aspx

NEW QUESTION 16
You install the DHCP Server role on a server1. You create a new scope on Server1. The scope properties are configured as shown in the following exhibit.

Use the drop down menus to select the answer choice that completes each statement based on the information presented in the graphics.

Answer:

Explanation:

NEW QUESTION 17
You have a server named Server1 that runs Windows Server 2021 and is configured as a domain controller.
You install the DNS Server server role on Server1.
You plan to store a DNS zone in a custom Active Directory partition. You need to create a new Active Directory partition for the zone. What should you use?

• A. Set-DnsServer
• B. DNS Manager
• C. New-ADObject
• D. Ntdsutil.exe
• E. Active Directory Sites and Services

Answer: B

Explanation: References:
https://www.businessnewsdaily.com/11019-set-up-configure-dns-on-windows-server-2021.html

NEW QUESTION 18
Note: This question is part of a series of questions that use the same scenario. For your convenience, the scenario is repeated in each question. Each question presents a different goal and answer choices, but the text of the scenario is exactly the same in each question in this series.
Your network contains an Active Directory domain named contoso.com. The functional level of the domain is Windows Server 2012.
The network uses an address space of 192.168.0.0/16 and contains multiple subnets. The network is not connected to the Internet.
The domain contains three servers configured as shown in the following table.

Client computers obtain TCP/IP setting from Server3.
You add a second network adapter to Server2. You connect the new network adapter to the Internet. You install the Routing role service on Server2.
Server1 has four DNS zones configured as shown in the following table.

You need to ensure that computers in the domain can resolve the following:
The name server2.contoso.com to the name nat.contoso.com
The 192.168.10.50 IP address to the name host7.fabrikam.com
The name server7.tailspintoys.com to the 192.168.100.101 IP address
Which types of DNS records should you use? To answer, drag the appropriate DNS record types to the correct requirements. Each DNS record type may be used once, more than one, or not at all. You may need to drag the
split bar between panes or scroll to view content.

Answer:

Explanation: