NEW QUESTION 1
A customer reports that copying data over iSCSI attached LUNs is taking significantly longer than usual. The customer asks you to help to identify the root cause of this problem.
Which two perfstat sections would you use to accomplish this task? (Choose two.)

• A. stats lun
• B. lun stats -vserver
• C. statit
• D. stats volume

Answer: BC

NEW QUESTION 2
What is a major difference between NFSv3 and NFSv4.x?

• A. NFSv4.x is stateful, and NFSv3 is stateless.
• B. NFSv4.x requires an auxiliary protocol for status monitoring, and NFSv3 does not.
• C. NFSv4.x is stateless, and NFSv3 is stateful.
• D. NFSv4.x requires an auxiliary protocol for mounting, and NFSv3 does not.

Answer: A

NEW QUESTION 3
A customer reports that a takeover has been disabled on an HA pair. What would be a cause for this to happen?

• A. The HA interconnect is not functioning properly.
• B. There is a disk running too hot.
• C. The interface for the hardware assist has become unavailable.
• D. The cluster network is not functioning properly.

Answer: A

NEW QUESTION 4
Click the exhibit button.

Your customer reports that their FAS2554A system reports multi-path HA when running the sysconfig command. However, Config Advisor reports an error about incorrect cabling.
What are the two reasons for the messages? (Choose two.)

• A. Shelves 10 and 20 have different IOM modules and must be in separate stacks.
• B. The FAS2554 system is cabled incorrectly to shelf ID 20.
• C. The DS2246 shelf is wrong; the shelf ID must be 11.
• D. Disk shelves 10 and 20 are cabled incorrectly to each other.

Answer: BD

NEW QUESTION 5
For restore purposes, a storage administrator on an ONTAP system created a FlexClone of a volume that contains a LUN from a specific snapshot. This LUN cannot be seen by a Windows client after a disk rescan is performed by using Disk Management.
In this scenario, which statement is correct?

• A. The cloned LUN must be brought online.
• B. The cloned LUN needs to be mapped to an initiator group.
• C. The cloned volume must be split from the source volume before the LAN can be used.
• D. The cloned LUN must be renamed to a different name than the name of the source LUN.

Answer: C

NEW QUESTION 6
Click the exhibit button.

Your customer has severe latency on one of their SATA aggregates. You run the statit -b and statit -e commands to obtain detailed disk statistics.
Referring to the output shown in the exhibit, which disk would be the problem?

• A. 0a.11.19
• B. 0a.11.21
• C. 0a.13.21
• D. 0a.11.23

Answer: A

NEW QUESTION 7
A customer has requested your assistance with replacing a DS224C disk shelf from their cluster nondisruptively.
Which two actions should be performed before physically replacing the shelf? (Choose two.)

• A. Verify that the system is configured as multipath high availability.
• B. Upgrade the IOMs in the shelf before starting the removal process.
• C. Verify that the drives in the shelves are spares and ownership is removed.
• D. Zero the disks before performing the physical shelf removal.

Answer: AC

NEW QUESTION 8
A customer has a 2-node MetroCluster. They experienced a complete power loss at site B. The customer has lost connectivity to site B and now realizes that the DR partner at site A has not taken over the DR partner at site B.
Which two actions must be performed in this scenario? (Choose two.)

• A. On the DR partner at site A, perform the process to switchover.
• B. Ensure that site B is prevented from serving data or simply powered off (nodes and disk shelves).
• C. On the DR partner at site A, perform the process to heal the data aggregates.
• D. On the DR partner at site B, perform the process to heal the root aggregate.

Answer: AD

NEW QUESTION 9
A customer called you after a failure in their Microsoft Hyper-V environment on the “SVM1” SVM. The customer wants to enable nondisruptive operations (NDO) to prevent future failures.
In this scenario, which two actions must be performed? (Choose two.)

• A. Verify that the continuously-available option is set on the CIFS share.
• B. Verify that SMB2 is enabled.
• C. Verify that SMB3 is enabled.
• D. Verify that the branchcache option is set on the CIFS share.

Answer: AB

NEW QUESTION 10
Click the exhibit button.

Your customer added a new DS4246 shelf to their FAS system. They created an aggregate on the new shelf. Two weeks later, they log in to Active IQ and discover the Medium Impact error shown below.
“Both SAS connections from one controller go to the same shelf.” Referring to the exhibit, which statement is correct?

• A. You are unable to obtain a “Cable Visualization” overview from Active IQ.
• B. A faulty cable is causing the problem.
• C. A faulty IOM is causing the problem.
• D. You can correct this problem without downtime on the FAS system.

Answer: D

NEW QUESTION 11
Click the exhibit button.

When you log in to a node, a warning is displayed as shown in the exhibit. Which statement is correct in this scenario?

• A. The node root volume was moved to a new aggregate.
• B. The partner still hosts the CFO aggregate for the node.
• C. One or more RDB db files are damaged due to an internal software error.
• D. The node cannot communicate with the rest of the nodes in the cluster.

Answer: D

NEW QUESTION 12
A customer complains that the copy offload does not work when copying large file from a Windows 8 client between the CIFS shares that are hosted on the same ONTAP cluster.
What are two reasons for this problem? (Choose two.)

• A. Deduplication is not enabled on the destination volume.
• B. The client should be using Windows 10 for ODX support.
• C. The source and target volumes reside on different cluster nodes.
• D. SMB 3.0 disabled on the CIFS SVM.

Answer: AD

NEW QUESTION 13
Which statement is correct about the wafliron command?

• A. The wafliron command is used to correct parity inconsistencies.
• B. The wafliron command is used to correct inconsistent WAFL metadata.
• C. The wafliron command is used to correct WAFL i2p inconsistencies.
• D. The wafliron command is used to correct inconsistent user data blocks.

Answer: B

NEW QUESTION 14
A field support engineer has just replaced the IOXM on NODE2 on a FAS8080 running ONTAP 9.1. After the replacement, the customer is unable to perform a giveback because the interconnect is down.
In this scenario, which statement is correct?

• A. Verify that there cross-links between the interconnects.
• B. Verify that the installed FC-VI cards are configured properly.
• C. Verify that the interconnect cables on the motherboard are connected correctly.
• D. Verify that the interconnect cables on the IOXM are connected correctly.

Answer: D

NEW QUESTION 15
A customer has created an interface group (igroup) named a0a, a VLAN named a0a-2500, and a data LIF associated with the VLAN interface that has been assigned an IP of 10.254.10.100. The customer is able to ping 10.254.10.100 from a Windows client without any issues, but data traffic is not working.
In this scenario, what is the solution to the problem?

• A. Disable flow control on the a0a interface.
• B. Configure an appropriate service policy for the data LIF.
• C. Correct the MTU mismatch between the broadcast domain configuration and the upstream network switches.
• D. Allow data traffic by using LIF firewall policies.

Answer: D

NEW QUESTION 16
After you replaced the motherboard, the node stopped in the “waiting for the cluster application to come
online” state.
Which two actions should you perform to troubleshoot this problem? (Choose two.)

• A. Check the status of the HA with the interconnect-up field of storage failover show command.
• B. Verify the setting of the cluster interconnect switch.
• C. Verify that the physical links on the cluster ports are up.
• D. Check the status of the cluster with the cluster ring show command.

Answer: AD

NEW QUESTION 17
Click the exhibit button.

You execute a few commands and many fail, as shown in the exhibit. What could cause the error?

• A. The mgwd user space process on cluster1-02 failed.
• B. The aggregates were manually brought offline.
• C. The cluster-02 node is down.
• D. The bcomd user space process on cluster1-02 failed.

Answer: C

NEW QUESTION 18
Which two statements are true about a data volume? (Choose two.)

• A. A data volume can be accessed by a LIF on any node.
• B. A data volume can be moved to any aggregate with space for it in the cluster.
• C. A data volume can be accessed by a user connected to any SVM.
• D. An SVM root or root load sharing mirror volume must be present on every node.

Answer: AB

NEW QUESTION 19
......