NEW QUESTION 1
What are three types of licenses available for ONTAP? (Choose three.)

• A. standard
• B. evaluation
• C. system
• D. site
• E. field

Answer: ABD

Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.onc-sm-help-930%2FGUID-28C78952-A5CC-40BE-9F30-7057B4045CB6.html

NEW QUESTION 2
Click the Exhibit button.

You are configuring a NetApp cluster to communicate on VLAN 1. However, the new LIF is unable to communicate with any host in the VLAN. The network administrator has configured the switch port as an access (untagged) port on VLAN 1 and says that the VLAN is non-routed.
Referring to the exhibit, what would you do to troubleshoot this problem? (Choose the best answer.)

• A. Verify that there is not IP address conflict on the network.
• B. Reconfigure the LIF to be on port e0c.
• C. Add a default gateway.
• D. Verify that the network cabling is working properly.

Answer: B

NEW QUESTION 3
You created a new SVM with two NFS data volumes. You have a Linux host on the same subnet as the SVM that is able to NFS mount, however a Linux host on a different subnet is not able to NFS mount. You confirmed that the export policy rules are correct.
In this scenario, which configuration will solve the mount failure? (Choose the best answer.)

• A. The NFS server is not configured on the SVM.
• B. NTP is not configured on the SVM.
• C. NFS auditing is not enabled on the SVM.
• D. The SVM default network route is missing.

Answer: A

NEW QUESTION 4
Your company has recently decided to stop using the Fibre Channel Protocol (FCP) in the data center. You are asked to decommission FCP and reuse any UTA2 ports to 10 GbE. Which two steps are involved in this task? (Choose two.)

• A. Reboot the nodes.
• B. Destroy any FC LIFs hosted on UTA2 ports.
• C. Remove the FCP license from all nodes in the cluster.
• D. License additional phttps://www.netapp.com/pdf.html?item=/media/13482-tr4375pdf.pdforts for 10 GbE connectivity.

Answer: AC

NEW QUESTION 5
Which three steps are required to serve NFS exports from your ONTAP system? (Choose three.)

• A. You must create an export policy rule.
• B. You must license CIFS.
• C. You must create an SMB share.
• D. You must license NFS.
• E. You must have provisioned a volume to export.

Answer: ABD

Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.exp-nfsv3-cg%2FGUID-A9424109-8286-4053-BBA9-3E542A73080A.html

NEW QUESTION 6
Click the Exhibit button.

Your manager asks you to create a new FlexVol on an aggregate called AGGR_2. When you click “Create new FlexVol”, you are unable to select AGGR_2 to create the new volume. Referring to the exhibit, which two SVM settings solve this problem? (Choose two.)

• A. Change the aggregate security style of AGGR_2 to UNIX.
• B. Use the volume move option and reallocate the SVMs root volume to AGGR_2.
• C. In the resource allocation tab, select the “Do not delegate volume creation” option.
• D. In the resource allocation tab, select the “Delegate volume creation” option and select AGGR_2.

Answer: BC

NEW QUESTION 7
When deploying NVMe/FC, what must be supported and enabled on the host to ensure proper multipathing? (Choose the best answer.)

• A. NVMe Qualified Names (NQN)
• B. Asynchronous Namespace Access (ANA)
• C. single initiator multiple target zoning
• D. Asymmetric Logical Unit Access (ALUA)

Answer: B

Explanation:
Reference: https://www.netapp.com/pdf.html?item=/media/10681-tr4684pdf.pdf

NEW QUESTION 8
Click the Exhibit button.

A customer has an issue with performance on an NVMe solution. The SVM is using all four ports shown in the exhibit. In this scenario, how would the customer improve the host performance? (Choose the best answer.)

• A. Change the SFP+ in the controllers from 32 Gbps to 64 Gbps.
• B. Move all of the network interfaces to port 2a.
• C. Move some of the network interfaces from 2a to 2c and 2d.
• D. Remove support of the FC protocol and only use NVMe.

Answer: A

NEW QUESTION 9
You are asked to deploy a two-node ONTAP Select system. The physical hardware is located in two different locations. You must ensure high availability and automated switchover. Which two steps would you take to satisfy this requirement? (Choose two.)

• A. Ensure that the ONTAP Select Deploy VM resides at a third location other than the two datacenters.
• B. Use ONTAP Select Deploy to install the nodes on the physical hardware.
• C. Ensure that the SyncMirror license is installed on the cluster.
• D. Use Active IQ Unified Manager to provide a quorum for the two nodes.

Answer: BD

NEW QUESTION 10
You must enable remote authentication and grant a remote administrator either cluster admin or vsadmin access. In this scenario, which three authentication types are supported for ONTAP 9.7? (Choose three.)

• A. CHAP
• B. AD
• C. SAML
• D. RADIUS
• E. LDAP

Answer: BCE

Explanation:
Reference: https://docs.netapp.com/ontap-9/topic/com.netapp.doc.pow-adm-auth-rbac/Administrator%20authentication%20and%20RBAC.pdf

NEW QUESTION 11
You have a new ONTAP 9.7 2-node AFF A300 cluster with 2x DS224C full shelves of 3.8 TB encrypted SSDs.
In this scenario, which statement matches the factory disk-ownership setting? (Choose the best answer.)

• A. All drives on shelf 1 are assigned to one node, and all drives on shelf 2 are assigned to the partner node.
• B. All even-numbered drives on each shelf are assigned to one node, and all odd-numbered drives on each shelf are assigned to the partner node.
• C. Disk ownership is not assigned by the factory.
• D. Drives 0-11 on each shelf are assigned to one node, and drives 12-23 on each shelf are assigned to the partner node.

Answer: C

NEW QUESTION 12
What are three firewall policies? (Choose three.)

• A. cluster
• B. node
• C. data
• D. mgmt
• E. intercluster

Answer: ACE

Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-nmg%2FGUID-09329781-2E57-49E5-B052-EC4D6FEBB41B.html

NEW QUESTION 13
Which two protocols does ALUA support on an ONTAP cluster? (Choose two.)

• A. iSCSI
• B. NVMe
• C. FCP
• D. NFS

Answer: AD

Explanation:
Reference: https://library.netapp.com/ecmdocs/ECMP1204463/html/GUID-D7570D36-76FF-4923-8ECC-525AF435C2D6.html

NEW QUESTION 14
Click the Exhibit button.

You have a mission-critical SQL application that uses a single SMB 3.1.1 share to host its database. The storage node that is hosting the SMB share sql01_ca for the SQL database experiences a hardware failure and fails over to the surviving node.
Referring to the exhibit, what is the state of the SMB share for the SQL database during the failover? (Choose the best answer.)

• A. The SMB share will be available, but all data is corrupted.
• B. The SMB share will be unavailable until node failback.
• C. The SMB share will be available, and all data is accessible.
• D. The SMB share is unavailable due to its stateful nature.

Answer: A

NEW QUESTION 15
Which two resources are managed by an SVM administrator? (Choose two.)

• A. disks
• B. aggregates
• C. Snapshot copies
• D. LUNs

Answer: CD

Explanation:
Reference: https://thinksystem.lenovofiles.com/storage/help/index.jsp?topic=%2Fcluster_management_using_thinksystem_storage_manager_for_dm_series_9-6%2F1A0349D6-AB43-4D05-9413-EFBB89B847EB_.html

NEW QUESTION 16
You created a thick-provisioned NAS volume. You receive an alert that the snapshot reserve is full.
In this scenario, which two actions will solve this problem? (Choose two.)

• A. Increase the fractional reserve.
• B. Increase the snapshot reserve percentage.
• C. Delete Snapshot copies.
• D. Decrease the volume size.

Answer: AC

NEW QUESTION 17
Click the Exhibit button.

You have an ONTAP cluster that is running a FlexGroup that is serving SMB data out to various users. One of the users receives an error when trying to modify an existing file. What is the cause of the problem? (Choose the best answer.)

• A. The FlexGroup is full
• B. The constituent is full
• C. The FlexGroup is offline
• D. The aggregate is full

Answer: B

NEW QUESTION 18
Which two SVM types does a cluster contain after cluster creation? (Choose two.)

• A. dp-destination
• B. peer
• C. data
• D. admin

Answer: CD

Explanation:
Reference: https://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sag%2FGUID-D860985F-11BF-4589-9457-E0FD03130B1F.html

NEW QUESTION 19
Your company requires that all data must be encrypted in flight to prevent data from falling into the wrong hands.
What are two ways to accomplish this task? (Choose two.)

• A. Ensure that SnapMirror compression is enabled in all SnapMirror relationships.
• B. Modify your cluster peering relationships to support cluster peering encryption.
• C. Enable Multi-Factor Authentication (MFA) for your SnapMirror relationships.
• D. Ensure that all intercluster replication traffic is done through a VPN tunnel.

Answer: BC

NEW QUESTION 20
Your company is merging with another company. You are asked to set up your AFF A400 cluster to support two networks that have the same overlapping 192.168.1.0/24 subnet. In this scenario, what must you create, to enable the same subnet with overlapping IPs on the same cluster? (Choose the best answer.)

• A. broadcast domain
• B. IPspace
• C. subnet
• D. failover group

Answer: B

NEW QUESTION 21
Click the Exhibit button.

You configured LACP between a 2-node AFF 220 system and two Ethernet switches using multichassis Ether-channel for redundancy. You sent the network connection diagram in the exhibit to your network team to cable and configure the switch. You noticed partial connectivity on the AFF A220 for the interface groups.
Referring to the exhibit, which two statements are correct? (Choose two.)

• A. ONTAP does not have a multichassis Ether-channel feature.
• B. The network team forgot to verify the port channel members.
• C. 10 GbE ports are not supported with the AFF A220.
• D. The storage cabling to the switches is incorrect.

Answer: AC

NEW QUESTION 22
......