NEW QUESTION 1

A Dell EMC PowerEdge 14G server uses Intel OPTANE DC Persistent Memory in App Direct mode. What is the minimum size DIMM supported for this type of memory?

• A. 64 GB
• B. 128 GB
• C. 256 GB
• D. 512 GB

Answer: C

NEW QUESTION 2

An engineer needs to upgrade a Dell EMC PowerEdge R440 server from a single PSU to dual PSU configuration. There are unused PSU modules from PowerEdge R430 and R420 servers available, and they have the same wattage ratings.
What should the engineer do to complete the task?

• A. Add the PowerEdge R420 PSU modules to the PowerEdge R440
• B. Order a new PSU specific to the existing PowerEdge R440
• C. Add the PowerEdge R430 PSU modules to the PowerEdge R440
• D. Configure the PowerEdge R440 PSU with 1+1 configuration

Answer: A

NEW QUESTION 3

A technician working with a Dell EMC PowerEdge 14G server observes the PCIe indicator turn solid amber What should they do to take corrective action upon checking the System Event log?
A)

B)

C)

D)

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: C

NEW QUESTION 4

Match each RAID level to its characteristic.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 5

What is a key distinction between 1DRAC8 and 1DRAC9?

• A. iDRAC9 offers HTML5 based GUI
• B. iDRAC9 default credentials are root/calvin orderable only
• C. iDRAC8 offers HTML5 based GUI
• D. iDRAC8 default credentials are customer orderable

Answer: C

NEW QUESTION 6

What is the correct order of steps taken during the BIOS/UEFI Recovery process?

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 7

A technician wants to remotely log in to a server but finds that the IDRAC virtual Console feature Is not available. Use the simulator to explore the system. What Is the cause of this Issue?


Note: It is necessary to dose (x) the simulator window before you can select a response to this question.

• A. The Virtual Console is disabled
• B. Operating system not installed on remote server
• C. The server has been powered down
• D. There are more than the maximum number of active sessions

Answer: C

NEW QUESTION 8

What is a characteristic of out-of-band management?

• A. Dedicated device
• B. Agent based
• C. Less secure
• D. Dependent upon OS

Answer: A

NEW QUESTION 9

What can be done using in-band management?

• A. Agentless discovery
• B. Firmware and driver updates
• C. Network bandwidth optimization
• D. Remote access

Answer: C

NEW QUESTION 10

What is a valid password option available from the iDRAC9 Unique ID feature?

• A. Encryption Default
• B. Secure Default
• C. Legacy Generated
• D. Randomly Generated

Answer: D

NEW QUESTION 11

What is a consideration when populating DIMMs with different types of persistent memory in a Dell EMC PowerEdge 14G server?

• A. NVDIMMs cannot be mixed with RDlMMs
• B. NVDIMMs can be mixed only with LRDIMMs
• C. RDlMMs can be mixed only with NVDIMMs
• D. LRDIMMs can be mixed only with RDlMMs

Answer: B

NEW QUESTION 12

You must configure a BOSS card with 2 x 120GB drives for a Dell EMC PowerEdge server. What is the only supported mode?

• A. RAID 0
• B. RAID 5
• C. RAID 1
• D. Non-RAID Mirroring

Answer: A

NEW QUESTION 13

What is used by the Lifecycle Controller to directly back up the server profile on a 14G Dell EMC PowerEdge server?

• A. Network share
• B. vFlash SD card
• C. USB Flash drive
• D. IDSDM SD card

Answer: A

NEW QUESTION 14

A technician needs to repurpose a Dell EMC PowerEdge server. The server has dual processors with 18 cores each The OS only "sees" 24 threads in total.
Which setting should the technician change in Processor Settings in the System BIOS?

• A. System Profile
• B. Virtualization Technology
• C. HyperThreading
• D. Number of Cores per Processor

Answer: A

NEW QUESTION 15

Which rear disk drive option is available in a Dell EMC PowerEdge R740xd server?

• A. 4x 3.5" drives
• B. 2x3.5" drives
• C. 8x2 5" drives
• D. 6x2 5" drives

Answer: B

NEW QUESTION 16

A Dell EMC PowerEdge server logs the following CPU Machine Check error CPU1 IERR What action might solve the problem?

• A. Remove flea power
• B. Update the Intel driver
• C. Reseat the IDSDM
• D. Swap the PERC controller

Answer: B

NEW QUESTION 17

A technician needs to update the IDRAC license on a Dell EMC PowerEdge R740 server from Express to Enterprise. The server has the following components:
* 2x CPUs
* 384 GB RAM
* 6x 1 TB drives
* 1x PSU
The server is connected to active AC, but it is powered down, and it needs to stay powered down No errors are presently displayed
How can the technician upgrade the license?

• A. The license cannot be upgraded on a single PSU system
• B. Power on the server, then connect to the iDRAC and upgrade iDRAC license before powering down the server
• C. The license cannot be upgraded because the user will not allow the server to be powered on
• D. Connect to the iDRAC GUI and upgrade the .DRAC license while the server .s powered down

Answer: A

NEW QUESTION 18

A company that has very specific firmware requirements has acquired Dell EMC PowerEdge servers Any replaced parts of the type must match the original parts identically. The procedure must be as simple as possible with minimal risk.
What action should a technician take to help accomplish this goal?

• A. Configure servers to access the remote firmware repository
• B. Enable the Match Firmware of Replaced Part setting in the system BIOS
• C. Install and configure a repository manager
• D. Enable the Collect System Inventory On Restart (CSIOR) attribute

Answer: A

NEW QUESTION 19
......