NEW QUESTION 1
An Avaya Orchestrator administrator has been tasked with getting a copy of the Temperature Values chart for a Server. When doing this in the past, the administrator has navigated to the Compute Group Dashlet-Host
Up-Host IP Address-Performance Chart. However, the Temperatures Values chart cannot be found. What is potentially causing this issue?

• A. The SNMP credentials for the Server's thermostats subsystems are incorrect.
• B. The IP address chosen is of the ESXi host, not the iLO interface.
• C. The Host is currently unresponsive.
• D. The Temperatures Values are only available for VSP switches and Storage systems.

Answer: C

NEW QUESTION 2
Which three examples of hardware equipment redundancy are built into the ACP 4200? (Choose three.)

• A. Redundant iLO connections to each HP server.
• B. Redundant storage processors in the storage arrays.
• C. Redundant hot swap switch CPU modules.
• D. Redundant power supplies in all hardware components.
• E. Redundant pairs of Power Distribution Units.

Answer: ACE

NEW QUESTION 3
An ACP 4200 engineering team is considering deploying an Extension Rack. What is the purpose of the Extension Rack?

• A. When the Main rack is not functioning properly the Extension Rack will take over for the main.
• B. When all hardware components cannot fit into the Main ACP Rack, Extension Racks are used for additional physical appliances and servers.
• C. When full redundancy is needed, Extension Racks are used for additional physical appliances and servers.
• D. When the number of telephone extensions on the Avaya Aura® applications exceed the recommended limit, Extension Racks are used to host additional media resources to support a higher limit.

Answer: C

NEW QUESTION 4
Refer to the exhibit.

An administrator notices that the Rack View of Avaya Orchestrator is highlighted with a Red X on the graphical representation of the rack.
What does this indicate?

• A. At least 50% of the hosts in the rack contain a service which is in critical state.
• B. The rack has a front door that is currently unlocked.
• C. The rack is currently unreachable.
• D. At least one of the hosts in the rack contains a service which is in critical state.

Answer: D

NEW QUESTION 5
Which statement about all hosts in the cluster describes a system requirement for VMware vMotion in ACP 4200?

• A. They must be the same server type.
• B. They must have matching Memory capacity.
• C. They must have matching CPU types.
• D. They must have matching VMware network settings.

Answer: C

NEW QUESTION 6
When a new instance and new VMs are added to ACP 4200, additional VLANs are added to the ACP 4200. To what are these VLANs added?

• A. The VSP Switches only.
• B. The ESXi Hosts only.
• C. The VSP Switches and ESXi Hosts.
• D. The VSP Switches, the ESXi Hosts, and the existing VMs.

Answer: C

NEW QUESTION 7
When planning to add additional VMs to an ACP 4200, to determine if an additional host server would be required, which tool can be used?

• A. The Server resource calculator from the VMware vCenter client.
• B. The Server Calc worksheet in the Lifecycle workbook.
• C. The Server resource calculator tool in the Lifecycle workbook.
• D. The Server calculator tool from Avaya Orchestrator.

Answer: D

NEW QUESTION 8
The customer’s networking team is considering connectivity options to the ACP 4200.
When would the ACP 4200 use Fabric Connect for network connectivity to the customer network?

• A. When the customer network uses stackable switches.
• B. When the customer network uses routers or switches that have an integrated switch fabric.
• C. When the customer network uses Extreme Networks VSP switches.
• D. When the customer network uses Cisco routers with VRRP.

Answer: C

NEW QUESTION 9
A customer requires the Avaya Session Border Controller for Enterprise (ASBCE) be part of their ACP 4200 deployment.
Which statement regarding an ASBCE High Availability configuration in ACP 4200 is true?

• A. Only the Appliance deployment option is available for the ASBCE High Availability configuration in the ACP 4200.
• B. The High Availability configuration consists of two Session Border Controllers (SBC) either in VM or appliance deployments.
• C. The High Availability configuration consists of two Session Border Controllers (SBC) either In VM or appliance deployments, plus a Element Management System (EMS) VM.
• D. Only the VM deployment option is available for the ASBCE High Availability configuration in the on ACP 4200.

Answer: D

NEW QUESTION 10
How can the administrator check the status of all services being monitored by Avaya Orchestrator?

• A. It is not possibl
• B. Services are displayed on a per-Host basis only.
• C. By navigating to Quick View-All Service Problems.
• D. By navigating to Details-Service Status.
• E. By navigating to ACP 4200 Configuration Wizard-Service.

Answer: B

NEW QUESTION 11
Refer to the exhibit.

What is the purpose of the “SMRule” DRS rule that states the two Avaya Aura® Session Managers must run off different ESXi hosts?

• A. To improve the latency of DRS load-balancing
• B. To prevent a single ESXi host from being overloaded with SIP traffic
• C. To preserve seamless failover/recovery across primary and secondary Session Managers
• D. To reduce the memory and CPU load on a single ESXi host

Answer: C

NEW QUESTION 12
A new instance/customer and new VMs are being added to the ACP 4200. As part of this procedure, additional VLANs are added to the ACP 4200.
What are these additional VLANs required to support?

• A. The new instances of ServerTech PDUs.
• B. The new instances of iSCSI Storage Area Networks.
• C. The new instances of Avaya Aura applications.
• D. A new instance of Avaya Orchestrator.

Answer: A

NEW QUESTION 13
A customer experienced an outage of one of their Host servers in their ACP 4200 solution. Additionally, after the failure, all of the applications that were running on the failed host, did not recover to another host.
To verify the configuration, which third party management tool needs to be used?

• A. SSH into the switches
• B. Avaya Orchestrator
• C. Nimble Storage web interface
• D. vSphere Web Client

Answer: D

NEW QUESTION 14
When powering up the virtual machines, what is the first virtual machine that needs to be powered on?

• A. vCenter Server
• B. WebLM
• C. System Manager
• D. Communication Manager

Answer: A

NEW QUESTION 15
Which three tasks must be performed by the ACP 4200 implementation team at the customer site? (Choose three.)

• A. Connect the network switches to the customer network.
• B. Assign IP addresses to the existing Virtual Machines.
• C. Connect to the VMware vCenter Server Appliance and power up the virtual machines.
• D. Fill up the IP template.
• E. Install a ground connection for each enclosure.

Answer: ADE

NEW QUESTION 16
......