NEW QUESTION 1
Which Cisco UCS Server running HXDP supports the largest storage pool?

• A. UCS B200
• B. HX220
• C. HX 240
• D. UCS B480

Answer: C

Explanation:

NEW QUESTION 2
Which three capabilities are provided by Virtual Interface Cards'? (Choose three.)

• A. Virtualizing object storage environments by pushing meta data directly to the management server
• B. The virtual interfaces created by a VIC do not accommodate hypervisor communication like VMkernel interfaces on vSphere.
• C. Management through Cisco IMC or UCS Manager with dynamic configuration of virtual interface cards based on the server profile (MAC/WWN).
• D. Traffic processing for internal and external communication supporting simultaneous HBA and NIC operation on the same physical hardware.
• E. Multiple-interface-card virtualization without any additional driver requirements with integration of the virtualized cards into the Fabric Interconnect infrastructure.
• F. A virtual environment, such as VMware vSphere, provides VM connectivity via a virtual switch to individual virtual machines bypassing local hardware requests.

Answer: CDE

Explanation:

NEW QUESTION 3
Cisco HyperFlex AII-NVMe nodes are expected to be supported beginning in which HXDP version'?

• A. HXDP 4.0.1
• B. HXDP 3.5.1
• C. HXDP 3 5.2
• D. HXDP 4.0

Answer: D

Explanation:

NEW QUESTION 4
Which two features enable RAID cards striping as well as mirroring and parity? (Choose two.)

• A. Integration with Cisco Intersight for a cloud-based storage management solution.
• B. No load on the system resources, drives seem as one drive to the operating system
• C. On RAID card failure, the RAID onboard concurrent cache assists rebuild cache.
• D. Hot replacement of drives available, depending on configuration
• E. Distributed drives across disparate systems can be in RAID together.

Answer: BD

Explanation:

NEW QUESTION 5
Which three features for NVMe transfer protocol are valid? (Choose three.)

• A. Uses PCIe interface
• B. Streamlined commands for fewer CPU instructions
• C. More and deeper queues
• D. Requires 10 controller
• E. Increases memory speed for more lOPs
• F. Improves SAS and SATA speed

Answer: ABC

Explanation:

NEW QUESTION 6
Which three functionalities are provided by VAAI? (Choose three.)

• A. When a native snapshot is requested, the request is processed by the hypervisor.
• B. Missing pieces of data are re-created from the remaining nodes in service
• C. Cisco HXDP creates a file system native snapshot which is registered in the vSphere.
• D. VAAI performs caching, deduplication: and compression of data.
• E. Instead of the snapshot being performed in hypervisor it is offloaded to Cisco HXDP.
• F. VAAI uses RAID to consolidate disks into a shared data platform.

Answer: ACE

Explanation:

NEW QUESTION 7
What is required to cluster a pair of Fabric Interconnects?

• A. uplink connections to the enterprise network
• B. HXDP 3.5.2 or better
• C. connection between the Fl pair using ports L1 and L2
• D. UCS Manager 2.1 or better

Answer: C

Explanation:

NEW QUESTION 8
Drag the server type from the left onto the maximum number of capacity drives on the right.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
HX220c-M5SX_6-8 HX240c-M5SX_6-23 HX240c-M5L_6-12

NEW QUESTION 9
When cabling a given HX node to the Fabric Interconnect which three actions are required? (Choose three.)

• A. Connect the node to different port numbers on each of the two Fabric Interconnects.
• B. Connect port 1 on the VIC to Fabric Interconnect A.
• C. Connect server port L1 to Fabric Interconnect port L1.
• D. Connect the node to the same port number on each of the two Fabric Interconnects.
• E. Connect server port L2 to Fabric Interconnect port L2
• F. Connect port 2 on the VIC to Interconnect B.

Answer: BDF

Explanation:

NEW QUESTION 10
What is the maximum number of cores supported in the Cisco UCS M5 server?

• A. 28
• B. 22
• C. 12
• D. 8

Answer: A

NEW QUESTION 11
Which two Cisco UCS Servers support converged nodes in HyperFlex Data Platform (HXDP)? (Choose two.)

• A. HX 220
• B. UCSB200
• C. UCS C480
• D. UCS B480
• E. HX240

Answer: AE

Explanation:

NEW QUESTION 12
If a GPU card is Installed in HyperFlex nodes before a cluster is created, which action can be used to automatically build the service profile in UCS Manager?

• A. Check Run UCS Manager Configuration during the cluster creation process
• B. Check the extended memory option during the cluster creation process
• C. Check the GPU workflow during the cluster creation process
• D. Check the administrative workflow option during the cluster creation process

Answer: C

Explanation:

NEW QUESTION 13
Which three configurations for read caching in Cisco HyperFlex are valid? (Choose three.)

• A. Battery-Initiated Read-back (default): Only read data and most commonly used data are deposited in the Level 4 read-back cache
• B. Write-back (default): Only write information and most commonly used information are deposited in the cache
• C. Write-through (install option for VDI): Only most commonly used data is cached: optimizing VDI performance
• D. No caching (SSD): With all-flash nodes; because there is little difference in read speeds between SSDs
• E. Level 4 cached (SSD): With semi-flash nodes; there is a large difference in read speeds between SSDs
• F. Write-first (default for VDI): Infrequently used data is cached: freeing system resources for VDI performance

Answer: BCD

Explanation:

NEW QUESTION 14
How many DIMMs are supported per memory channel in the Cisco UCS M5 server?

• A. 2
• B. 1
• C. 8
• D. 4

Answer: A

Explanation:

NEW QUESTION 15
Which three additional management tools are included in HXDP to configure HyperFlex clusters? (Choose three.)

• A. UCS Manager
• B. Storage CLI
• C. Data Center Network Manager
• D. Cisco IMC 13
• E. REST API
• F. HyperFlex Connect

Answer: BEF

Explanation:

NEW QUESTION 16
When building a HyperFlex cluster which two recommendations should be followed? (Choose two.)

• A. Use HX 220s for compute nodes and HX 240s for converged nodes
• B. Use B-Series servers to improve converged node scale.
• C. Use the same CPU model but memory configuration can be different.
• D. Use the same server configuration for the cluster.
• E. Use the same server model for the cluster.

Answer: DE

NEW QUESTION 17
......