NEW QUESTION 1
You are performing a network readiness assessment for Skype for Business deployment for a customer’s organization.
The customer’s organization includes five sites that are connected by site-to-site virtual private network (VPN) links. Each site includes from 20 to 100 client computers.
You need to collect network traffic metrics.
Which three network traffic metrics should you collect? Each correct answer presents part of the solution.

• A. average packet loss
• B. average jitter
• C. TCP/IP port statistics
• D. one-way network delay
• E. minimum jitter
• F. peer-to-peer (P2P) available bandwidth

Answer: ABD

NEW QUESTION 2
You are developing a design solution to eliminate the possibility of wide area network (WAN) over-subscription by Skype for Business traffic.
You need to assign tasks to each office to prevent over subscription and to ensure quality.
Which tasks should you assign to each office? To answer, drag the appropriate task or tasks to the correct office or offices in the answer area. Each task may be used once, more than once, or not at all. You may need to drag the split bar between panels or scroll to view content.

Answer:

Explanation:

Topic 7, Mix Questions set

NEW QUESTION 3
Your company has offices in New York, Tokyo, Paris, and Sydney. Employees frequently travel between the offices.
The company plans to deploy Skype for Business Server 2015 and Enterprise Voice. A pool will be deployed to each office. Location-based routing will not be used.
You need to ensure that if a user dials 911 from any of the offices, the call is routed to the local emergency services provider for that office.
What should you do?

• A. From the Skype for Business Server 2015, Topology Builder, create a central site for each office.Deploy one pool to each sit
• B. From the Skype for Business Server 2015 Control Panel, create a location policy for each location.
• C. From the Skype for Business Server 2015, Topology Builder, create one central sit
• D. Deploy all pools to the central sit
• E. From the Skype for Business Server 2015 Control Panel, create a single location policy.
• F. From the Skype for Business Server 2015, Topology Builder, create a central site for each office.Deploy one pool to each sit
• G. From the Skype for Business Server 2015 Control Panel, create auser-level location policy for each locatio
• H. Assign the respective user-level location policy to the users in each office.
• I. From the Skype for Business Server 2015, Topology Builder, create one central sit
• J. Deploy all pools to the central sit
• K. From the Skype for Business Server 2015 Control Panel, modify the global location policy.

Answer: A

NEW QUESTION 4
You have a Skype for Business Server 2015 environment. You deploy the Edge server to the perimeter network.
Users cannot connect to Skype for Business by using mobile devices.
You need to identify the problem that is preventing the users from connecting to Skype for Business by using mobile devices.
Which two utilities should you use? Each correct answer presents a complete solution.

• A. Microsoft Remote Connectivity Analyzer
• B. Network Configuration Viewer
• C. The Debug-CsLisConfiguration cmdlet
• D. Microsoft Lync Connectivity Analyzer

Answer: AD

NEW QUESTION 5
Trey Research currently leverages Exchange Online to provide voice mail capabilities for their existing IP-PBX. An Exchange Online Unified Messaging (UM) dial plan with type of E.164 Uniform Resource
Identifier (URI) is currently in use. Skype for Business Server 2015 is already deployed and integrated with Exchange Online. Users can see presence in Outlook Web App and schedule Skype meetings from Outlook Web App.
Trey Research is deploying Skype for Business Server 2015 Enterprise Voice and would like to retain voice mail capabilities in Exchange Online.
You need to enable voice mail for Enterprise Voice users.
Which three actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to the answer area and arrange the in the correct order.

Answer:

Explanation:

NEW QUESTION 6
You need to implement the Mediation services solution. What should you do?

• A. Use a collocated Mediation server on the existing Front End Servers in Melbourne and Singapore.
• B. Deploy a new stand-alone Mediation server pool in Melbourne and Singapore.
• C. Deploy a dedicated Mediation server pool at each site.
• D. Deploy a Survivable Branch appliance at each site.

Answer: A

NEW QUESTION 7
You collect the following call statistics for users in Los Angeles:
✑ Peak call concurrency is 25 percent.
✑ Fifty percent of all placed calls are routed to the public switched telephone network (PSTN)
✑ Thirty percent of all placed calls are internal calls to users in the other offices.
✑ Twenty percent of all placed calls are conference calls.
✑ The average bandwidth for peer-to-peer calls is 65 kilobits per second (Kbps).
✑ The average bandwidth used for conference calls is 100 Kbps.
You need to allocate the minimum amount of bandwidth required on the wide area network (WAN) link for the planned implementation of the voice gateway in the Los Angeles office. All calls to the PSTN will be routed through the local voice gateway in the Los Angeles office.
How much bandwidth in megabits per second (Mbps) should you allocate?

• A. 7.20 Mbps
• B. 3.95 Mbps
• C. 10.00 Mbps
• D. 2.25 Mbps

Answer: B

NEW QUESTION 8
Your company has a Skype for Business Server 2015 infrastructure that contains a single site. You subscribe to a third-party SIP provider that provides E911 services to the company. During testing, you discover that location information is not being passed to the SIP provider. You have the following trunk configuration:

You need to ensure that the location information is sent to the third-party SIP provider. What property should you set to True?

• A. EnableReferSupport
• B. EnablePIDFLOSupport
• C. ForwardPAI
• D. EnableBypass

Answer: B

Explanation: References:
https://docs.microsoft.com/en-us/powershell/module/skype/set-cstrunkconfiguration?view=skype-ps

NEW QUESTION 9
A company plans to implement Skype for Business Server 2015. Before they start deploying the solution, they want to ensure that the network can handle the media traffic that the solution produces.
You must perform a network traffic simulation on their network.
You need to ensure that the correct network metrics are collected during the network traffic simulation. Which three network metrics should you collect? Each Answer presents part of the solution.

• A. packet loss
• B. one-way network delay
• C. average jitter
• D. forward error correction overhead
• E. number of media streams

Answer: ABC

Explanation: References:
http://i.crn.com/custom/UC_Strategies_Report.pdf Page 4

NEW QUESTION 10
You support a Skype for Business environment. You deploy System Center Operations Manager. You implement Enterprise Voice.
Some users use a desktop phone to place and receive public switched telephone network (PSTN) calls with people outside of Skype for Business. Some of these users report intermittent connectivity issues with incoming and outgoing calls.
You need to periodically confirm that users are able to place and receive calls with people outside of Skype for Business.
Which two actions should you perform? Each Answer presents part of the solution.

• A. In the synthetic transaction, run the Test-CsP2PAV Skype for Business Management Shell cmdlet.
• B. Create a watcher node and configure it for an extended, non-default synthetic transaction.
• C. In the synthetic transaction, run the Test-CsPstnPeerToPeerCall Skype for Business Management Shell cmdlet.
• D. Create a watcher node and configure it for a default synthetic transaction.

Answer: BC

Explanation: References: https://technet.microsoft.com/en-us/library/jj204943(v=ocs.15).aspx

NEW QUESTION 11
You perform a network readiness assessment for a Skype for Business deployment.
The organization’s network includes a head office and 400 branch offices. All branch offices are connected to the head office with a Multiprotocol Label Switching (MPLS) link.
You have completed the traffic simulation. The Usage Modeling Data for the Beijing site is shown in the following table:

A summary of the simulation results is shown in the table below:

Detailed simulation results are shown in the following exhibits:
- One Way Network Delay (Click the Exhibit button.)

- Average Jitter (Click the Exhibit button.)

- Maximum Jitter (Click the Exhibit button.)

- Average Packet Loss (Click the Exhibit button.)

- Maximum Consecutive Loss (Click the Exhibit button.)

You need to provide recommendations based on the simulation results. What should you recommend?

• A. Increase WAN link bandwidth.
• B. Monitor Quality of Experience (QoE).
• C. Implement Call Admission Control (CAC) on Skype for Business for the affected sites.
• D. Restrict video capability or reduce quality codec usage for certain user groups.

Answer: A

NEW QUESTION 12
You have a Skype for Business Server 2015 infrastructure that has Enterprise Voice enabled.
You need to ensure that users can place a call on hold, and can then retrieve the call later by dialing a number from any phone. The solution must ensure that if a call is on hold for four minutes, the call is automatically forwarded to the receptionist.
Which two action should you perform? Each correct answer presents part of the solution.

• A. Modify the global dial plan.
• B. Modify the Call Park settings.
• C. Modify the global voice policy.
• D. Create a Call Park orbit.
• E. Create a static route.

Answer: CD

NEW QUESTION 13
Parnell Aerospace has a Skype for Business Server 2015 environment. The company plans to implement response groups for their internal Help Desk and Accounting teams.
The two teams have the following requirements for their individual response groups: Help Desk Response Group
*Agents must sign in to the response group before they can accept calls.
*Must offer new calls to the agents in the order in which they are listed in the Agent list.
*Need to share queues with other Response Groups. Accounting Response Group
*Agents must not need to sign in to the response group before they can accept calls.
*Must offer new calls to each agent in turn.
*Must be managed by a dedicated Response Group Manager.
You need to configure the response groups for the Help Desk and Accounting teams.
How should you configure the response groups? To answer, select the appropriate configuration option from each list in the answer area.

Answer:

Explanation:

NEW QUESTION 14
You need to replace the existing automatic call distribution (ACD) helpdesk with Skype for Business Server 2015 solution.
Which three actions should you perform in sequence to recreate the ACD in Skype for Business Server 2015? To answer, move the appropriate actions from the list of actions to the answer area and arrange them in the correct order.

Answer:

Explanation:

NEW QUESTION 15
You have a Skype for Business Server 2015 infrastructure. The infrastructure contains three servers. The servers are configured as shown in the following table:

You plan to provide users with the ability to use desktop sharing and to display Microsoft PowerPoint presentations during conference.
You need to create the firewall rules.
How should you configure the firewall rules? To answer, select the appropriate servers and ports for each feature in the answer area.

Answer:

Explanation:

NEW QUESTION 16
You need to configure the trunks defined in the Skype for Business topology based on the requirements. Which two actions should you perform? Each correct answer presents part of the solution.

• A. Enable media bypass.
• B. Enable centralized media processing.
• C. Set Encryption Support Level to required.
• D. Disable REFER support.

Answer: AD

NEW QUESTION 17
You have a Skype for Business Server 2015 infrastructure.
You need to prevent the users in the legal department from forwarding calls. Other users must be able to forward calls.
Which two Skype for Business Management Shell cmdlets should you run? Each correct answer presents part of the solution.

• A. Grant-CsMobilityPolicy
• B. Set-CsVoicePolicy
• C. New-CsMobilityPolicy
• D. New-CsVoicePolicy
• E. Grant-CsVoicePolicy

Answer: DE

Explanation: References:
https://technet.microsoft.com/en-us/library/gg425856.aspx