642-035 Exam Questions - Online Test

642-035 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

Cause all that matters here is passing the Cisco 642-035 exam. Cause all that you need is a high score of 642-035 Troubleshooting Cisco Data Center Unified Computing exam. The only one thing you need to do is downloading Testking 642-035 exam study guides now. We will not let you down with our money-back guarantee.

Q1. At any given time, each server can be associated with how many service profiles? 

A. 1 

B. 2 

C. 5 

D. 10 

E. unlimited 

Answer: A 

Q2. A local storage installation of ESX on a Cisco UCS C-Series server has failed due to local storage issues. What is the cause of the problem? 

A. LSI drivers are not bundled with ESX. 

B. The hard drive has a 1-TB partition size. 

C. The server only has an onboard controller, while ESX requires an LSI RAID controller card. 

D. ESX is not supported on Cisco UCS C-series servers. 

Answer: C 

Q3. If a server is not associated with a service profile, the activated firmware remains pending. Which two steps should you take? (Choose two.) 

A. Manually reboot the server. 

B. Reset the server to a new profile. 

C. Reset the unassociated server to activate the firmware. 

D. Reinitialize the firmware process with Cisco UCS Manager. 

E. Download the firmware and start over. 

F. Shut down gracefully and start over. 

Answer: AC 

Q4. Which statement is true with respect to resetting a forgotten Cisco IMC admin password on a Cisco UCS C-Series rack-mount server? 

A. Download the Cisco IMC password reset utility ISO file from Cisco.com and boot from virtual media. The server will boot the Linux Live CD and reset the password to 'password'. 

B. Download the Cisco IMC password reset EFI plugin file from Cisco.com to a USB flash drive and boot to the EFI shell. The startup.nsh file will auto-load and reset the password to 'password'. 

C. Shut down the server and remove all power supplies for 3 minutes to allow the password capacitor to discharge. Use the default password 'password' to log back in. 

D. Shut down the server and remove all power cords. Open the case and short the jumper specified in the model-specific Cisco UCS C-Series Server Installation and Service Guide. 

Answer: D 

Q5. What is the maximum number of boot targets for an FCoE vHBA on a Cisco UCS C-Series server? 

A. 1 

B. 2 

C. 3 

D. 4 

Answer: D 

Q6. In new Cisco UCS release 2.0 installations, what are the default VLAN IDs? 

A. Ethernet VLAN default ID is 4048, FCOE default VLAN ID 4048 

B. Ethernet VLAN default ID is 1, FCOE default VLAN ID is 3968 

C. Ethernet VLAN default ID is 1, FCOE default VLAN ID is 2 

D. Ethernet VLAN default ID is 2, FCOE default VLAN ID is 4047 

E. Ethernet VLAN default ID is 1, FCOE default VLAN ID is 4048 

Answer: E 

Q7. What should you do when you see faults during the initial setup and discovery process? 

A. Take note and address the faults. 

B. You can safely ignore these faults. 

C. Log them and try to address the first one. 

D. Reboot until the error messages go away. 

Answer: B 

Q8. Which command sequence in the Cisco UCS C-Series rack server CLI sends tech support data to a TFTP server? 

A. ucs-c250 / # scope cimc ucs-c250 /cimc # scope tech-support ucs-c250 /cimc/tech-support # set path default.tar.gz ucs-c250 /cimc/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /cimc/tech-support *# commit 

B. ucs-c250 / # scope system ucs-c250 /system # scope tech-support ucs-c250 /system/tech-support # set path default.tar.gz ucs-c250 /system/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /system/tech-support *# commit 

C. ucs-c250 / # scope support ucs-c250 /support # scope tech-support ucs-c250 /support/tech-support # set path default.tar.gz ucs-c250 /support/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /support/tech-support *# commit 

D. ucs-c250 / # scope fault ucs-c250 /fault # scope tech-support ucs-c250 /fault/tech-support # set path default.tar.gz ucs-c250 /fault/tech-support *# set tftp-ip 192.168.70.45 ucs-c250 /fault/tech-support *# commit 

Answer: A 

Q9. Which two types of ports does end host mode switching have? (Choose two.) 

A. VSS 

B. border 

C. router 

D. server 

E. STP 

F. client 

Answer: BD 

Q10. Which remote access protocol is used by default to obtain CLI access to a Cisco UCS C-Series standalone server? 

A. Telnet 

B. SSH 

C. HTTP 

D. SSL 

E. SOCKS 

Answer: B