NEW QUESTION 1
What can prevent you from adding an interface to a pre-existing port-channel on a CISCO Nexus N7K device?

• A. The port-channel is In LACP passive mode
• B. The interface already assigned to a different port-channel,
• C. The interface has been allocated to a different VOC
• D. no shutdown was issued on the interface.

Answer: B

NEW QUESTION 2
You are using the CISCO ACI programmatic features and you receive this error message from the REST API Token Was invalid (Error: Token timeout)
Which option is a possible cause Of the error?

• A. The REST API requires that a login is refreshed
• B. The header or request sent to the web server IS malformed such that the request cannot be parsed by the web server
• C. The HTTP port is disabled on the Cisco APICs and HTTPS is enabled
• D. The CISCO APIC fails to resolve the distinguished name.

Answer: A

NEW QUESTION 3
You are configuring a Cisco Nexus 9000 Series Switch. Which configuration can be implemented for VXLAN BGP EVPN?

• A. VXLAN BGP EVPN by using an NVE interface in a default VRF
• B. RACLs on the Layer 3 uplinks for the VXLAN traffic
• C. QoS classification for the VXLAN traffic on all of the interfaces
• D. DHCP snooping on the VXLAN VLANs

Answer: B

NEW QUESTION 4
Refer to the exhibit.

Your customer is migrating their existing top-of-rack data center to a new location that uses an end-of-rack configuration. The customer requests a site survey prior to the migration.
Which fact must you highlight in your survey that is required for a successful translation?

• A. power source must be 240 volts only for blade chassis.
• B. power source must be 240 volts only for fabric interconnect switches.
• C. blade chassis using passive TWNAX cables must be placed within 5 meters of the end rack.
• D. Blade chassis must not be fully equipped with blades when using and end-of-racksetup.

Answer: C

NEW QUESTION 5
Refer to the exhibit.

You attempt to delete the N7K-1 VDC, the operation is unsuccessful. Which cause of the issue is true?

• A. Custom resource allocations are assigned in the VDC.
• B. N7K-1 is the default VDC.
• C. You are logged in as vdc-admin.
• D. Interfaces are assigned to N7K-1.

Answer: D

NEW QUESTION 6
Which tools can assist in the troubleshooting of FC-0 issues? (Choose three.)

• A. FC analyzer
• B. SPAN
• C. Device Manager
• D. show interface fc1/1 optical-power-budget
• E. PAA
• F. a portable protocol analyzer

Answer: ACF

NEW QUESTION 7
You are no longer seeing updates to the device-aliases database on your Cisco Nexus 5596UP Switch. Which command is useful to determine if the scope of Cisco Fabric Services application distribution was being administratively limited?

• A. N5K2# show cfs region
• B. N5K2# show cfs scope
• C. N5K2# show cfs locale
• D. N5K2# show cfs acl
• E. N5K2# show cfs firewall

Answer: A

NEW QUESTION 8
How can you identify the blade location when tracing server traffic?

• A. by performing CDP checks on the Cisco UCS Fabric Interconnects
• B. by using a trace utility
• C. by collecting traffic that uses a SPAN monitoring port
• D. by examining the interface to which the server MAC address is connected

Answer: D

NEW QUESTION 9
Refer to the exhibit.

Customer encounters the problem as shown in the exhibit. What is the cause of the problem?

• A. No server was requested or received by the FLOGI database.
• B. One external link must be up for server interface to be up.
• C. Multiple external links must be up for the server to come up.
• D. Internal links are down and must be up for the server interface to be up.

Answer: A

NEW QUESTION 10
On the secondary vPC switch, under which circumstance does the vPC autorecovery feature not bring up the vPC member ports?

• A. Peer link fails, and subsequently, the peer-keepalive link fails.
• B. Peer link is up, and the peer-keepalive link fails.
• C. Both vPC peers are reloaded, and the primary does not come back up.
• D. Peer link fails, and subsequently, the primary switch fails.

Answer: B

NEW QUESTION 11
You see incoming updates in the logs from the hypervisor. But the State Of the Cisco APIC fails to change
Which option is a possible cause Of the issue?

• A. VMM is not integrated properly
• B. The APIC is in a minority state
• C. No uplinks are configured on the Cisco AVS.
• D. The VMM credentials are incorrect.

Answer: D

NEW QUESTION 12
Refer to Exhibit.

The Cisco Nexus 5000 Series Switches fail to form an OSPF adjacency. Which option is a possible cause of the issue?

• A. The interfaces are disabled.
• B. The network type is set to broadcast
• C. There is mismatched process ID
• D. The OSPF hello timer values are mismatched.

Answer: D

NEW QUESTION 13
Which command is used to check for potential vPC configuration consistency problems?

• A. show vpc brief interface
• B. show vpc global config
• C. show vpc consistency-parameters global
• D. show vpc config

Answer: C

NEW QUESTION 14
Refer to the exhibit.

During a VSAN outage, you come across this configuration. Please select two possible causes? (Choose two)

• A. no common VSANs on both switches
• B. no common trunks
• C. no common VSAN members in the same trunk
• D. VSANs in trunk are the same, but the trunk is not up

Answer: AC

NEW QUESTION 15
Refer to the exhibit.

The customer informs you of a problem they are encountering. What is the cause of the problem?

• A. The core upstream switch does not have NPIV enabled.
• B. The downstream switch does not have NPIV enabled.
• C. NPIV has been disabled on all switches.
• D. NPIV has been configured but not enabled on the uplink port.

Answer: A

NEW QUESTION 16
A customer is configuring an upstream disjoint Layer 2 network in a Cisco UCS domain. So far they have configured the following:
Fabric Interconnects are in switching mode.
There is symmetrical configuration for high availability. There are no overlapping VLANs.
Each vNIC is communicating with one disjoint Layer 2 network.
After validating the above, the customer is still having issues with network connectivity. What is the issue?

• A. Overlapping VLANs are allowed in a disjoint Layer 2 network.
• B. The vNIC configuration is incorrect and must communicate with two or more disjoint layer 2 networks.
• C. The fabric interconnect must be in end-host mode for a disjoint Layer 2 network.
• D. Asymmetrical configuration for high availability needs to be configured.

Answer: C

NEW QUESTION 17
Refer to the exhibit.

You are configuring a Cisco APIC for access. Which task is being performed in the exhibit?

• A. configuring APIC management EpG
• B. creating the LDAP logjn domain
• C. creating the LDAP provider
• D. creating the LDAP provider group

Answer: C

NEW QUESTION 18
Which statement would explain why the overlay interface on an OTV edge device is not in the up state?

• A. The site identifiers are identical within a multihomed site.
• B. Multicast groups are not mapped to a range of SSM addresses to carry the multicast traffic.
• C. An adjacency server is not configured for connectivity over a multicast transport.
• D. The OTV IS-IS metrics do not match across all adjacent OTV edge devices.

Answer: B

NEW QUESTION 19
Which command would you use to find the AED of an extended VLAN in a dual-homed site of an OTV network?

• A. show otv aed on the AED
• B. show otv site on any edge devices in the site
• C. show otv vlan on the AED
• D. show otv aed on any edge devices in the site
• E. show otv vlan on any edge devices in the site

Answer: C

NEW QUESTION 20
Refer to the exhibit.

When your customers have NPV problems, which two actions should you take? (Choose two.)

• A. Verify that the NPV core switch supports NPIV and that it is enabled.
• B. Ensure that the VLAN values are configured on both sides of the NPV core switch.
• C. Verify the status of the servers and external interfaces, using the show npv server status command.
• D. Ensure that the VSAN value that is configured on the device links is correct.
• E. For all the device links, ensure that the port mode on the NPV device is in Full_port mode.

Answer: AD

NEW QUESTION 21
Which command displays the traffic statistics for a port channel interface?

• A. show interface port-channel channel-number
• B. show port-channel traffic
• C. show port-channel usage
• D. show port-channel compatibility-parameters

Answer: B

NEW QUESTION 22
Which option is a best practice that should be followed When replacing a CISCO Nexus 5000 Series switch in a vPC topology?

• A. Connect a dual-homed Fabric Extender topology fabric port to the replacement switch.
• B. Ensure that the vPC role priority of the replacement switch is equal to the existing swtch.
• C. Obtain the configuration from the peer switch if the configuration synchronization feature was enabled.
• D. Ensure that the vPC role priorty of the replacement switch is better than the existing switch

Answer: C

NEW QUESTION 23
Refer to the exhibit.

What is the cause of the ISSU failure when using the command show system internal csm global info?

• A. The command conf-t is holding a lock and not released it.
• B. The SSN feature is not enabled on both switches.
• C. The reference count is less than 1 due to a lack of successful config-sync.
• D. It cannot be determined from the output.
• E. An Administrator is logged in on another session and has a lock of the session data base to prevent ISSU.

Answer: A

NEW QUESTION 24
You must identify and isolate traffic loss. Which option do you configure to monitor EPG-to-EPG traffic within a tenant?

• A. SPAN
• B. traffic map
• C. tcpdump
• D. Atomic counters

Answer: C

NEW QUESTION 25
Refer to the exhibit.

Which action removes the system designation from VLAN 70?

• A. Create another port profile that excludes VLAN 70
• B. Shut down the port profile first
• C. Delete the uplink-storage port profile, and then receive it
• D. Remove VLAN 70 from the trunk first

Answer: A

NEW QUESTION 26
You receive a priority 1 trouble ticket that there is OSPF route instability in the data center core Cisco Nexus 7018 Switches. Which command is useful to help validate a theory that hello packets are being throttled?

• A. N7018# show class-map interface control-plane
• B. N7018# show policy-map interface control-plane
• C. N7018# show service-policy interface control-plane
• D. N7018# show copp status
• E. N7018# show copp statistics
• F. N7018# show control-plane class copp-system-class-critical

Answer: B

NEW QUESTION 27
Which option is the port type of an uplink Fibre Channel port on an NPV edge switch?

• A. E
• B. F
• C. TN
• D. NP

Answer: D

NEW QUESTION 28
......