NEW QUESTION 1
For each feature. indicate whether it is available with both hpe oneview Standard and hpe oneview Advanced licenses, or only with an hpe oneview Advanced license.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 2
Which statement about server hardware types is true?

• A. Once selected in the server profile, the server hardware type cannot be changed, and a server profile can be moved only between the same type of servers
• B. Server hardware type can be defined only for HPE Synergy and HPE BladeSystem, but it cannot be defined for HPE ProLiant or Apollo systems
• C. Administrator has to manually define the server hardware type for any unique server architecture and mezzanine card combination
• D. The server hardware type is automatically created when a server with unique architecture and mezzanine card configuration is added to HPE OneView

Answer: A

NEW QUESTION 3
Click the option from the HPE OneView main menu that will allow you to define UPS or other components that will work as a placeholder in a rack system.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 4
Refer to the exhibit.

Your customer wants to define a Logical Interconnect Group (UG) and set the redundancy of the master modules to highly available, but this option is not available. What is a possible reason?

• A. There are not sufficient frames for highly available setup.
• B. Some master modules only support a redundant setup.
• C. Firmware on the master modules is too low to support highly available setup.
• D. A dedicated license must be added to HPE OneView to enable this feature.

Answer: B

NEW QUESTION 5
You are deploying HPE OneView to manage a customer's HPE ProLiant servers Is this statement about appliance availability true?

• A. HA features for HPE OneView are enabled only if the appliance is deployed on an HPE SimpliVity cluster
• B. HPE OneView has a built-in HA feature that can be activated with an additional license
• C. HPE OneView availability relies on HA features provoed by the hypervisor
• D. During hpe oneView deployment customer may select configure proprietary HA mode.

Answer: C

NEW QUESTION 6
You want to update the firmware for only two HPE Synergy Virtual Connect SE 32Gb FC Modules of a large environment. From which level must this procedure be initiated?

• A. Logical Enclosure
• B. Logical Interconnect Group
• C. Logical Interconnect
• D. Server Profile

Answer: A

NEW QUESTION 7
Refer to the exhibit.

Which statement about the logical interconnect shown is true?

• A. For FC uplink sets, an additional uplink from second module should be added for redundancy.
• B. The maximum supported number of the internal networks for logical interconnect is configured.
• C. Additional uplink ports can be added to ETH-Uplink to increase available bandwidth.
• D. FC uplinks are not supported and will be converted to FCoE or RoCE uplinks.

Answer: C

NEW QUESTION 8
A customer wants to estimate the cost of the licenses required to manage HP€ Synergy and some external components When component includes an HPE OneView license for management?

• A. Compute Module
• B. Storage Array
• C. Master Module
• D. Logical Enclosure

Answer: A

NEW QUESTION 9
Which statement about a server profile for an Apollo system is true?

• A. Fibre Channel connections can be defined
• B. UEFI optimized is the only available boot mode
• C. Virtual WWNs and MAC addresses can be defined
• D. Enclosure Group Is automatically selected

Answer: A

NEW QUESTION 10
Your customer wants to use HPE OneView for VMware vCenter Server to simplify management of their VMware cluster running on HPE Synergy. The customer is concerned with the cost of additional licenses.
How will you explain licensing rules for this product?

• A. As long as the customer has HPE OneVtew Global Dashboard deployed, HPE OneView for VMware vCenter Server does not require any additional licenses.
• B. One HPE OneView for VMware vCenter Server license is required per HPE Synergy frame if more than 10 Compute Modules are installed in the frame.
• C. If the number of the HPE Synergy Compute Modules installed in HPE Synergy frame is less than 10, no license is required to use HPE OneView tor VMware vCenter Server.
• D. As long as the server is managed using HPE OneVie
• E. the customer can use HPE OneView for VMware vCenter Server without additional licenses.

Answer: B

NEW QUESTION 11
Click the option that will allow you to update the firmware of master and satellite modules.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 12
You are creating a Logical Interconnect Group for a three-frame HPE Synergy solution with HPE Virtual Connect SE100Gb F32 Modules for Synergy.
In which scenario should you set redundancy for master modules to be highly available?

• A. When storm control or loop protection will be enabled for Virtual Connect modules
• B. When each of the frames has two Virtual Connect modules installed
• C. When each Virtual Connect module is installed in different frame
• D. When each Virtual Connect module is installed in different fabric

Answer: A

NEW QUESTION 13
Click the option that will allow you to disable virtual MAC addresses or generate a new pool of virtual Worldwide Names.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 14
How will setting the Purpose field within the network definition of a server profile impact the network traffic?

• A. network purpose can give higher priority for a specific type of traffic
• B. network purpose will impact the traffic only if Virtual Connect modules are used
• C. network purpose will define QoS within Logical Interconnect
• D. network purpose does not affect the behavior of the network

Answer: C

NEW QUESTION 15
A customer has to deploy 21 HPE Synergy Compute Modules in a boot from SAN setup. How this task can be simplified while keeping the profile consistent?

• A. Boot volumes can be created on demand and defined in the server profile template.
• B. Boot volumes can be prepared in advance and later presented as shared volumes to the Compute Modules.
• C. An existing volume can be replicated automatically when creating a server profile.
• D. single SAN volume can be created and utilized by all HPE Synergy Compute Modules.

Answer: A

NEW QUESTION 16
Within HPE OneView you can configure SNMPv1 read community string. What is the purpose of this feature?

• A. This is an SNMP community string that will be used when traps are forwarded to a WBEM Provider
• B. This is an SNMP community string that will be used when traps are forwarded to other SNMP applications
• C. This is an SNMP community string that will be used to receive a trap's SNMP Agent
• D. This is an SNMP community string that will be used to receive traps from HPE Onboard Administrators

Answer: C

NEW QUESTION 17
What is the best practice when deploying an HPE OneView appliance?

• A. Enable VMware Fault Tolerance if the appliance is deployed to a VMware hypervisor.
• B. deploy the appliance in a hypervisor cluster that Is not managed by OneView.
• C. Use thin-provisioning for the HPE OneView appliance to save storage capacity.
• D. Deploy two HPE OneView appliances and configure them in HA mode.

Answer: B

NEW QUESTION 18
......