NEW QUESTION 1
Your customer has me following HPE Synergy setup
- Three frames fully populated with HPE Synergy 480 Gen10 Plus modules and 25Gb/s downlink speed formulating a single logical enclosure
- Two HPE Virtual Connect SE 100Gb F32 Module for Synergy
- Four HPE Synergy 50Gb interconnect Link Module
- Six HPE Synergy Virtual Connect SE 32Gb FC Modules The customer needs to add a frame.
Which statement about the expansion of this setup is true?

• A. The additional frame must have HPE Virtual Connect FC modules installed
• B. The customer can grow the existing logical enclosure up to 5 frames
• C. The customer has to create a new logical enclosure for the additional frame
• D. The additional frame cannot have 12Gb SAS connection modules installed

Answer: C

NEW QUESTION 2
You modified a logical interconnect group mat is used to configure logical interconnects in five different logical enclosures. What will be the impact of that change?

• A. All physical interconnects from affected logical interconnects will be placed in a maintenance mode
• B. All physical interconnects from the affected logical interconnects must he rebooted to activate the new configuration
• C. All logical interconnects configured using this logical Interconnect group will report inconsistency
• D. All logical interconnects configured using this logical interconnect group will be automatically updated

Answer: A

NEW QUESTION 3
Refer to the exhibit.

Which statement about this logical JBOD is true?

• A. This logical JBOD can be connected to multiple systems to formulate a snared datastore.
• B. After deleting this logical JBOD drives will he blocked for 12h m case this JBOD must be re-created
• C. After deleting this logical JBOD, its drives w not be available until a clean-up procedure 6 done
• D. This logical JBOD can be presented to the compute nodes in a different frame.

Answer: C

NEW QUESTION 4
In the past a customer experienced a networking issue where network ports went down and came back up in quick succession.
Which HPE Virtual Connect SE 100 GD F32 Module for HPE Synergy feature can be configured to disable such ports?

• A. Pause flood protection
• B. sFlow
• C. Storm control
• D. Port flap protection

Answer: B

NEW QUESTION 5
Your customer manages HPE Synergy using HPE OneView. For one of its projects, the company purchased 50 HPE.
ProLiant DK385 Gen10 Plus v2. They plan to manage the new systems using HPE OneView as well. What should the customer do to manage rack system using HPE OneView?

• A. add the rack system to the HPE OneView instance used to manage HPE Synergy to centralize management of all systems.
• B. connect the rack system to an IPDU and add the IPDU to the HP
• C. OneView instance that is used for HPE synergy management.
• D. Deploy HPE OneView Global Dashboard and add the rack systems there, as AMD systems are not directly in HPE OneView.
• E. Deploy an HPE OneView virtual appliance, and, after configuration, use it to manage only the rack systems.

Answer: A

NEW QUESTION 6
Your customer plans to deploy VMware ESXi 7 0 U2 and they are looking for a hardware platform mat wilt allow them to use up to 24 TB of physical memory.
Which HPE compute system meets this customer's requirements?

• A. HPE ProLiant DL380 Gen 10 Plus
• B. HPE Synergy 480 Gen10 Plus
• C. HPE ProLiant DL560 Gen10
• D. HPE Superdome Flex 280

Answer: A

NEW QUESTION 7
Which tool can be used to evaluate me health of an HPE Oneview appliance before proceeding with an appliance updated.

• A. HPE Composer Maintenance Console
• B. HPE OneView Update Readiness Checker
• C. HPE OneView Global Dashboard
• D. HPE OneView Firmware Compliance Report

Answer: A

NEW QUESTION 8
Which statement about login redistribution is true?

• A. Login redistribution is available only If HPE Primera or HPE Alletra is connected directly to the HPE Synergy frame
• B. Login redistribution is a licensed feature and the number of licenses required depends on the number of active ports
• C. Login redistribution is supported only on the HPE Synergy Virtual Connect SE 32Gb FC Modules
• D. Login redistribution is used for login balancing when they are not distributed evenly over the FC links

Answer: C

NEW QUESTION 9
Your customer plans to use HPE Primera to boot HPE Synergy compute nodes. They currently have two HPE Virtual Connect SE 100Gb F32 Module for Synergy modules installed in the frame. The customer wants to use FC as a storage access protocol
What must be done to complete this task?

• A. Enable FC primary and secondary boot on the modules through the HPE OneView interface
• B. FC connectivity on the modules should be enabled through the service console by disabling FCoE.
• C. Add FC upgrade licenses in HPE OneView that will enable FC connectivity for the modules
• D. Enter both modules into a maintenance mode, then enable FC connectivity through CLI

Answer: B

NEW QUESTION 10
You need to setup HPE Synergy frames after hardware components are discovered within HPE OneView. Put the steps to achieve this goal into the coned order in the answer area on the right.

• A. Yes
• B. Not Mastered

Answer: A

NEW QUESTION 11
Your customer plans to deploy ESXi systems to HPE Synergy and HPE ProLiant servers using HPE OneView for VMware vCenter Server.
Which statement about HPE OneView for VMware vCenter Server functionality is true for this environment?

• A. HPE ProLiant servers need an HPE OneView for VMware vCenter Server license for full functionality
• B. Individual systems can be added to HPE OneView for VMware vCenter Server through an ILO management processor
• C. HPE Synergy requires HPE Composer 2 for full functionality of HPE OneView for VMware vCenter Server
• D. Only systems managed using HPE Oneview can use HPE Oneview for VMware vCenter Server functionalities

Answer: A

NEW QUESTION 12
An administrator tries to open iLO interlace from HPE OneView Instead of being automatically logged in a login prompt displays
Where should you start the troubleshooting process?

• A. At the iLO interface to verify whether the ILO Advanced license is properly applied
• B. At HPE OneView Interface to verify whether the server is In the maintenance mode
• C. At the iLO interface to verify whether the SSO certificate is removed from an iLO.
• D. At HPE OneView Interface to verify whether the iLO processor is disabled

Answer: A

NEW QUESTION 13
Your customer has a logical enclosure configured using a angle HPE Synergy frame with the following configuration
- two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- two HPE Synergy Virtual Connect SE 32Gb FC Modules -12 HPE Synergy 480 Gen10 Plus compute nodes with appropriate mezzanine cards
They plan to add a new HPE Synergy frame to an existing logical enclosure with the following configuration
- two HPE Synergy Virtual Connect SE 32Gb FC Modules
- two HPE Synergy 20Gb interconnect Link Modules
- Eight HPE Synergy 480 Gen 10 Plus compute nodes with appropriate mezzanine cards Which statement about the planned configuration change is true?

• A. Four compute modules must be moved to the second frame to balance the configuration
• B. The two HPE Synergy 20Gb interconnect Link Modules must be replace with the 50Gb option
• C. A license for an extended logical enclosure must be added to HPE OneView through GUI
• D. The HPE Synergy virtual Connect SE 32Gb FC Modules from both frames should be stacked

Answer: D

NEW QUESTION 14
Refer to the exhibit.

Which statement about this logical interconnect group is true?

• A. The master modules are located in the interconnect bays 2 and 5
• B. For the given downlink speed, the maximum number of frames is reached
• C. Both master modules are located in the same HPE Synergy frame
• D. To use interconnect bay set 3, all compute nodes must be half-height

Answer: C

NEW QUESTION 15
Your customer added a new Ethernet network in HPE Oneview mat is used to manage their HPE Synergy platform.
When the customer tries to connect one of the compute nodes to this network through the server profile, this network is not available.
What must be done to fix this issue?

• A. Check the Logical Enclosure settings and verify if the maximum number of networks allowed for this LE is reached.
• B. To make this network available to use in the server profile, the customer must enable the Smart Link feature within network definition.
• C. The newly created network must be added to the uplink set within the LIG, and Logical interconnect configuration must be updated from the LIG.
• D. Check within the server profile which server hardware is used and perform the Refresh operation on this compute node to get the latest adapter information.

Answer: C

NEW QUESTION 16
Which statement about HPE OneView milestone releases is true?

• A. A milestone release is a release which must be installed on HPE Composer to support current version of the Service Pack for Synergy
• B. A milestone release is a release that is published when HPE releases new hardware components to immediately support new systems
• C. A milestone release is available for selected partners that give access to HPE OneView features which are not officially announced.
• D. A milestone release is a release with an enhanced update architecture mat is a prerequisite prior to updating to a subsequent release.

Answer: A

NEW QUESTION 17
As a result of the troubleshooting process, you recommend replacing, HPE Synergy Composer modules which HPE Synergy Composer 2
Why would you recommend this change?

• A. HPE Composer 1 running HPE OneView 5 2 or later can support only 12 frames within a single management nog
• B. HPE Composer 2 can support more than the maximum 21 frames that are supported with HPE Composer 1 and HPE OneView.
• C. HPE Composer 2 provides access to 105 interface that can be used for full management of HPE Composer 2 remotely
• D. HPE Composer 1 cannot support remote frames, which doubles the configuration and management procedures effort

Answer: B

NEW QUESTION 18
Your customer plans to deploy a VMware ESXi with HPE Synergy platform. They also plan a vSAN deployment leveraging HPE D3940 Storage Modules and SSD drives
The customer requested the following components:
- HPE Synergy frame with ten HPE Synergy 480 Gen10 Plus compute modules
- Two HPE Virtual Connect SE 100Gb F32 Modules for Synergy
- An appropriate number of vSAN Standard licenses for each compute node
- One HPE O3940 Storage Module with 40 SSDs - All required cables and options Which statement about this request is true?

• A. vSphere licenses should be added, as vSAN licenses do not replace vSphere licenses
• B. vSphere Standard licenses should be replaced with Enterprise Plus licenses to enable vSAN
• C. One HPE Virtual Connect SE 100Gb F32 Module for Synergy should be replaced with 50GD/S ILM
• D. 20 SSD drives should be removed from this setup, as D3940 supports only 20 SSD or SAS drives.

Answer: B

NEW QUESTION 19
You configured a vVoI datastore using HPE Storage integration Pack for VMware vCenter.
Which storage object should you check using SSMC to verify whether vVol datastore is configured property?

• A. App Volume Set
• B. Storage Container
• C. Virtual Volume Set
• D. virtual Volume

Answer: C

NEW QUESTION 20
......