NEW QUESTION 1
Which statement describes an MQl channel?

• A. A bidirectional communications link between two queue managers.
• B. A unidirectional communications link between two queue managers.
• C. A bidirectional communications link that connects an application to a queue manager.
• D. A unidirectional communications link that connects an application to a queue manager.

Answer: C

NEW QUESTION 2
What is the extension is used for IBM MQ FFST reports?

• A. dmp
• B. fdc
• C. fst
• D. ffst

Answer: B

NEW QUESTION 3
An administrator wants to determine how many messages are on a TESTQ. Which MQSC command will return that information?

• A. display qstatus testq curdepth
• B. display qstatus testq message count
• C. display qstatus testq type (message) count
• D. display qstatus testq type (queue) curdepth

Answer: A

NEW QUESTION 4
An administrator is asked to forward all messages to queue ‘TEST.TEMP’ if the messages destined for ‘TEST.LOCAL’ end up on the dead letter queue.
Which rule in the dead letter handler rules table will enable the administrator to achieve this objective?

• A. REASON(MQRC_Q_FULL) ACTION(FWD) FWDQ(&DESTQ) HEADER(NO)
• B. REASON(*) ACTION(FWD) FWDQ(‘TEST.TEMP’) HEADER(NO) DESTQ(‘TEST.LOCAL’)
• C. REASON(*) ACTION(RETRY) FWDQ(‘TEST.LOCAL’) HEADER(NO) INPUTQ(‘TEST.TEMP’)
• D. REASON(MQRC_Q_FULL) ACTION(IGNORE) FWDQ(‘TEST.TEMP’) HEADER(NO) DESTQ(‘TEST.LOCAL’)

Answer: A

NEW QUESTION 5
Statistics must be gathered for a channel on a distributed platform queue manager which connects to a z/OS queue manager. The channel will be processing a very high message volume and the processing impact to the distributed queue manager must be minimized.
What is the appropriate setting for the STATCHL property of the channel definition?

• A. Low
• B. High
• C. Medium
• D. Low with the QMGR STATCHL property set to NONE

Answer: A

NEW QUESTION 6
The MQ administrator must meet a regulatory compliance requirement to preserve confidentiality of data in messages at rest, in traces, and in FFST files. Which MQ security control meets this requirement?

• A. Advanced Message Security with a non-blank ENCALG specified in the policy records.
• B. A non-blank value in the channel’s SSLCIPH attribute.
• C. Set PasswordProtection to ALWAYS in the qm.ini file.
• D. Use an API or API Crossing exit that encrypts the messages.

Answer: B

NEW QUESTION 7
An application is being implemented that required a connection to an MQ queue manager. Where can the queue manager be located relative to the application to achieve this?

• A. It can be either local or remote.
• B. It must be local to the application.
• C. It must be remote from the application.
• D. It can be either local or remote, but must use a requester channel for connection.

Answer: A

NEW QUESTION 8
DEFINE QLOCAL(TENNIS)
DEFINE QLOCAL(RUGBY)
DEFINE QALIAS(BALLS) TARGET(BALL) DEFINE QLOCAL(QMGB) USAGE(XMITQ)
DEFINE QREMOTE(BALL) RNAME(BALL) RQMNAME(QMGB)
The following commands are issued on QMGB: DEFINE QLOCAL(RUGBY)
DEFINE QALIAS(BALLS) TARGET(TENNIS) DEFINE QLOCAL(QMGC) USAGE(XMITQ) DEFINE QLOCAL(TENNIS)
DEFINE QREMOTE(BALL) RNAME(BALL) RQMNAME(QMGC)
The following commands are issued on QMGC:
DEFINE QREMOTE(BALLS) RNAME(BALLS) RQMNAME(QMGB) DEFINE QLOCAL(QMGB) USAGE(XMITQ)
DEFINE QALIAS(BALL) TARGET(RUGBY) DEFINE QLOCAL(TENNIS)
DEFINE QLOCAL(RUGBY)
Where does the message go when it is put to BALLS on QMGC?

• A. TENNIS on QMGC
• B. TENNIS on QMGB
• C. TENNIS on QMGA
• D. TENNIS on QMGC

Answer: B

NEW QUESTION 9
What is the purpose of the –s secretText parameter used in the prepareha and crthagrp commands on MQ Appliance?

• A. To be used as the unique key for the appliances.
• B. To be used to decid
• C. In secret, which appliance will be the preferred appliance.
• D. To generate a short-lived password used to create two keys, one for each appliance.
• E. To generate a short-lived password used to set up on unique key for the appliances.

Answer: A

NEW QUESTION 10
When an MQ queue manager is configured to produce events, what format are the event messages written in?

• A. TXT (Plain Text)
• B. XML (Extended Markup Language)
• C. CSV (Comma Separated Variable)
• D. PCF (Programmable Command Format)

Answer: D

NEW QUESTION 11
What should an administrator do to detect when an application attempts to open a channel, but the attempt fails because SSL does not allow the connection?

• A. Check instrumentation event messages.
• B. Adjust the DISCINT parameter for the channel.
• C. Update the channels stanza in qm.ini with SSL=AUDIT.
• D. Apply a fixpack to prohibit unauthorized channel access.

Answer: A

NEW QUESTION 12
In application triggering what is the role of trigger monitor process?

• A. It monitors the initiation queue and based on trigger message issues a command to start an application.
• B. It monitors the transmission queue and based on trigger message issues a command to start an application.
• C. It monitors the application queue and when the trigger conditions are met and issues a command to start an application.
• D. It monitors the application queue and when the trigger conditions are met, it creates a message and puts it on initiation queue.

Answer: A

NEW QUESTION 13
When using the rcrmqobj command to re-create an object from its image in the log, which condition must be satisfied?

• A. Linear logging is used
• B. Circular logging is used
• C. The queue manager is stopped
• D. The object is marked as damaged

Answer: A

NEW QUESTION 14
Which two settings can be exported and imported from MQ Explorer? (Select two.)

• A. JMS administration object definitions
• B. Queue definitions for the queue managers
• C. Channel definitions for the queue managers
• D. Connection details for remote queue managers
• E. Queue manager set memberships, set definitions, and set filters

Answer: DE

NEW QUESTION 15
What is the result of running the rpm -qa| grep MQSeries command on a Linux server?

• A. Adds packages
• B. Removes packages
• C. Displays packages
• D. Installs packages

Answer: D

NEW QUESTION 16
An administrator has a new application that sends 2MB messages to a remote queue manager, which is significantly larger than current messages which are 50KB.
How can an administrator ensure minimal impact on the existing environment?

• A. Set the workload balancing option to MIXEDSIZE.
• B. Require the queue manager to use message chunking.
• C. Set MSGGROUP to TRUE and MSGSIZE to a value of 2MB.
• D. Use separate channels and transmit queues for the new messages.

Answer: D

NEW QUESTION 17
A new LTS release of IBM MQ is made generally available. The versioning information is 9.0.0.0. When the next level of fixes is made available for this product what will the versioning information look like?

• A. 9.1.0.0
• B. 9.0.1.1
• C. 9.0.1.0
• D. 9.0.0.1

Answer: D

NEW QUESTION 18
What setting of the MONQ attribute should be used to stop capturing monitoring data for all queues on the Queue Manager?

• A. OFF
• B. NONE
• C. FALSE
• D. DISABLE

Answer: A

NEW QUESTION 19
An instance of IBM MQ on Unix regularly processes larger messages. Which condition will have a positive impact on message throughput given that the system is short of real memory?

• A. larger log buffer sizes
• B. Application processing outside of a unit of work
• C. Defining queue using large persistent queue buffers
• D. Defining queues using large non-persistent queue buffers

Answer: D

NEW QUESTION 20
Queue manager QM1 has a remote queue RMT1 which is a remote definitions of the local queue L1 on queue manager QM2.
How would an administrator define the transmission queue so that messages on RMT1 on QM1 are sent to L1 on QM2?

• A. DEFINE QLOCAL(‘QM2’) USAGE(XMITQ)
• B. DEFINE QLOCAL(‘RMT1’) USAGE(XMITQ)
• C. DEFINE QREMOTE(‘L1’) USAGE(XMITQ)
• D. DEFINE QUALIAS(‘QM2’) USAGE(XMITQ)

Answer: C

NEW QUESTION 21
An application is putting messages in an MQ cluster but the messages are only routed to the local queue manager to which the application is connected.
What parameter should the administrator adjust to achieve a desired round-robin delivery f messages throughout the cluster?

• A. MSGDLVSQ should be set to ANY
• B. CLWLUSEQ should be set to ANY
• C. MSGDLVSQ should be set to SHARE
• D. CLWLUSEQ should be set to SHARE

Answer: B

NEW QUESTION 22
An existing queue manager has a number of users and applications already provisioned for basic MQ access. The MQ Administrator must enable Advanced Message Security for the first time on this queue manager. Which change must be made to the queue manager’s configuration to accomplish this goal?

• A. Issue the SET POLICY command
• B. Issue the SET AUTHREC command
• C. Issue the REFRESH SECURITY TYPE(SSL) command
• D. Issue the REFRESH QMGR TYPE(CONFIGEV) command

Answer: C

NEW QUESTION 23
Which FFST Report field can be used to trigger tracing to start?

• A. FDC ID
• B. FFST ID
• C. Error ID
• D. Probe ID

Answer: D

NEW QUESTION 24
......