NEW QUESTION 1

You are securing the servers in Microsoft System Center Virtual Machine Manager (SCVMM).
You must use Network Controller to configure and manage servers that are on the same data plane as your
Software Defined Network (SDN).
You need to configure the protocols and authentication types.
Which protocols and authentication types should you use for each server? To answer, drag the appropriate protocols or authentication types to the correct devices or services. Each protocol or authentication type may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
References:
https://docs.microsoft.com/en-us/windows-server/networking/sdn/security/nc-security

NEW QUESTION 2

Your company has two datacenters. You have Windows servers in both locations. The network that connects the datacenters has high bandwidth and low latency.
You are designing a new virtual machine (VM) and storage environment based on servers that run Windows Server 2021. You need to implement a solution that meets the following storage requirements:
*Tolerates the failure of a single datacenter.
*Ensures zero data loss in the event of a file system failure.
Solution: You implement a storage replica with synchronous replication. Does the solution meet the goal?

• A. Yes
• B. No

Answer: A

NEW QUESTION 3

Your company has two datacenters. You have Windows servers in both locations. The network that connects the datacenters has high bandwidth and low latency.
You are designing a new virtual machine (VM) and storage environment based on servers that run Windows Server 2021. You need to implement a solution that meets the following storage requirements:
Tolerates the failure of a single datacenter.
Ensures zero data loss in the event of a file system failure. Solution: You implement Distributed File System Replication. Does the solution meet the goal?

• A. Yes
• B. No

Answer: B

NEW QUESTION 4

You manage Microsoft system center virtual machine manager (SCVMM). You need to enable data deduplication for the SCVMM library server. Which action should you perform for each configuration options?
To answer drag the appropriate action to the correct condition.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
MinimumFileAgeDays refers to the number of days after the file is created before the file is considered to be in-policy for optimization. You may want to modify this if you want Data Deduplication to be more aggressive.
Data Deduplication jobs are scheduled via Windows Task Scheduler and can be viewed and edited there under the path Microsoft\Windows\Deduplication. Data Deduplication includes several cmdlets that make scheduling easy. The most common reason for changing when Data Deduplication jobs run is to ensure that jobs run during off hours.
ExcludeFileType is for file types that are excluded from optimization. ExcludeFolder specifies folder paths that should not be considered for optimization. References:
https://docs.microsoft.com/en-us/windows-server/storage/data-deduplication/advanced-settings

NEW QUESTION 5

You administer a Microsoft System Center Virtual Machine Manager (SCVMM) infrastructure. You have a Microsoft Azure subscription.
You must design a backup strategy that meets the following requirements:
*Back up the SCVMM hosts, virtual machines (VMs), and workloads.
*Use a protection agent to perform the backups.
*Automate the backup process.
You need to recommend a backup solution. What should you recommend?

• A. Windows PowerShell script that runs Disk2VHD
• B. Microsoft Hyper-V Replica
• C. WBAdmin.exe
• D. System Center Data Protection Manager

Answer: D

NEW QUESTION 6

You need to ensure that the Hyper-V hosts meet the requirements for the sales department application. Which three actions should you perform in sequence? To answer, select the appropriate options in the answer area.
NOTE: Each correct selection is worth one point.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 7

You deploy Microsoft System Center Virtual Machine Manager (SCVMM) and System Center Operations Manager (SCOM). You integrate SCVMM with SCOM.
You need to view the reports for SCVMM.
What are two possible ways to achieve the goal? Each correct answer presents a complete solution.

• A. Launch the SCOM console.
• B. Launch the SCVMM console.
• C. Run the Windows PowerShell cmdlet Get-SCOMMonitor.
• D. Run the Windows PowerShell cmdlet Get-SCOMReportingSetting.
• E. View the Reporting server website for SCOM.

Answer: AE

Explanation:
References:
https://docs.microsoft.com/en-us/system-center/vmm/monitor?view=sc-vmm-1801

NEW QUESTION 8

You use Microsoft System Center Virtual Machine Manager (SCVMM) to manage your company's virtual infrastructure.
You need to install a host server that can run the full version of the .NET framework. Solution: Install the host server as Windows Server 2021 Server Core.
Does the solution meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
References:
https://docs.microsoft.com/en-us/windows-server/administration/server-core/what-is-server-core

NEW QUESTION 9

You plan to deploy a Nano Server that has the Microsoft Hyper-V role installed.
You must deploy the Nano Server host in a hyper-converged mode that has a Microsoft System Center Virtual Machine Manager (SCVMM) agent installed. You need to prepare a Nano Server VHD for a physical
machine.
Which three packages should you include in the VHD? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.

• A. Microsoft-NanoServer-DCB-Package
• B. Microsoft-NanoServer-SCVMM-Package
• C. Microsoft-NanoServer-SCVMM-Compute-Package
• D. Microsoft-NanoServer-Storage-Package
• E. Microsoft-NanoServer-NPDS-Package

Answer: BCD

Explanation:
References:
https://docs.microsoft.com/en-us/system-center/vmm/hyper-v-nano?view=sc-vmm-2021

NEW QUESTION 10

You administer the Microsoft system center virtual machine manager (SCVMM) infrastructure for an organization. The SCVMM fabric includes a highly available network Controller that stores diagnostic data in a library share. You plan to use the windows PowerShell network controller diagnostic toolset.
You are unable to access the necessary commands. You attempt to import the network controller diagnostic module but it is not available.
You need to be able to use the network controller diagnostic toolset from your device. What should install on your workstation?

• A. Network controller server role
• B. RSAT Hyper-V Tools feature
• C. Health and diagnostic role service
• D. RSAT Network controller feature

Answer: D

Explanation:
To use the Network Controller (control-path) diagnostic tools, you must first install the RSAT-NetworkController feature and import the NetworkControllerDiagnostics module

NEW QUESTION 11

You manage a System Center Virtual Machine Manager (SCVMM) environment. You plan to create virtual machine (VM) networks and IP address pools.
You need to ensure that VM networks are segmented. Solution: You create Windows Firewall rules on the VMs. Does the solution meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
The type of VM network you set up depends on the isolation settings for the logical network:
Network virtualization: If the logical network is isolated using network virtualization you can create multiple VM networks for a logical network. Within a VM network tenants can use any IP addresses they want for their VMs regardless of the IP addresses used on other VM networks. Tenants can also configure some network settings.
VLAN: If the logical network is isolated using VLAN or PVLAN you'll create on VM network for each network site and VLAN in the logical network.
No isolation: If the logical network is configured without isolation you'll create a single VM network linked to a logical network.
References:
https://docs.microsoft.com/en-us/system-center/vmm/network-virtual?view=sc-vmm-1807#create-a-vm-network

NEW QUESTION 12

You deploy Microsoft System Center Virtual Machine Manager (SCVMM) and System Center Operations Manager (SCOM). You install the SCOM agent on the SCVMM server. You install the SCVMM management pack.
You need to ensure that Performance and Resource Optimization (PRO) is available. What should you run?

• A. the SCOM setup wizard
• B. the integration wizard in the SCVMM console
• C. the integration wizard in the SCOM console
• D. the SCVMM setup wizard

Answer: B

Explanation:
References:
https://docs.microsoft.com/en-us/system-center/vmm/monitors-ops-manager?view=sc-vmm-1801

NEW QUESTION 13

You need to ensure that the existing VMs meet the requirements. What should you do?

• A. Modify the VM disks to Differencing.
• B. Upgrade the VM operating system to Windows Server 2021 Standard edition.
• C. Modify the VM configuration to Generation 2.
• D. Upgrade the VM operating system to Windows Server 2021 Datacenter edition.

Answer: D

NEW QUESTION 14

You need to configure an SDN network controller for the SCVMM test environment. What should you do first?

• A. In SCVMM, create a dedicated host group for Det-Server3, Det-Server4, and Det-Server5.
• B. In AD DS, create a security group and add Det-Server3, Det-Server4, and Det-Server5.
• C. In AD DS, create a security group and add Det-Server6, Det-Server7, and Det-Server8.
• D. In SCVMM, create a dedicated host group for Det-Server6, Det-Server7, and Det-Server8.

Answer: D

Explanation:
References:
https://docs.microsoft.com/en-us/system-center/vmm/sdn-controller?view=sc-vmm-1801

NEW QUESTION 15

You plan to deploy a Microsoft system center virtual machine manager (SCVMM) with network controller. You need to configure the datacenter firewall policies.
Which two options can you use?

• A. Northbound interface
• B. Windows PowerShell
• C. SCVMM console
• D. Southbound interface

Answer: AB

Explanation:
The Network Controller Northbound API allows you to configure, monitor, troubleshoot, and deploy new devices on the network by using Windows PowerShell, the Representational State Transfer (REST) API, or a management application with a graphical user interface, such as System Center Virtual Machine Manager.
Firewall Management
This Network Controller feature allows you to configure and manage allow/deny firewall Access Control rules for your workload VMs for both East/West and North/South network traffic in your datacenter. The firewall rules are plumbed in the vSwitch port of workload VMs, and so they are distributed across your workload in the datacenter. Using the Northbound API, you can define the firewall rules for both incoming and outgoing traffic from the workload VM. You can also configure each firewall rule to log the traffic that was allowed or denied by the rule.
References:
https://docs.microsoft.com/en-us/windows-server/networking/sdn/technologies/network-controller/network-cont

NEW QUESTION 16

You administer a Microsoft System Center Virtual Machine Manager (SCVMM) infrastructure. You have a Microsoft Azure subscription.
You must design a backup strategy that meets the following requirements:
*Back up the SCVMM hosts, virtual machines (VMs), and workloads.
*Use a protection agent to perform the backups.
*Automate the backup process.
You need to recommend a backup solution. What should you recommend?

• A. WBAdmin.exe
• B. SCVMM cluster
• C. Microsoft Hyper-V Replica
• D. System Center Data Protection Manager

Answer: D

NEW QUESTION 17

You plan to deploy Windows Server Gateway (WSG) with Microsoft System Center Virtual Machine Manager (SCVMM).
You need to configure the send and receive buffers for the Hyper-V hosts. Solution: You run the Windows PowerShell cmdlet Set-NetAdapterBinding. Does the solution meet the goal?

• A. Yes
• B. No

Answer: B

Explanation:
The Set-NetAdapterBinding cmdlet sets the binding state of a transport or filter on a network adapter. References:
https://docs.microsoft.com/en-us/powershell/module/netadapter/set-netadapterbinding?view=win10-ps

NEW QUESTION 18

You install Microsoft System Center Operations Manager (SCOM) and download a sealed management pack. You receive notifications from a monitor that a critical resource experiences an overload situation. When you check the resource, it is not in an overloaded condition.
You need to add a new threshold value for the resource. What should you create?

• A. an override in an existing management pack
• B. an override in a new management pack
• C. a monitor in a new management pack
• D. a monitor in an existing management pack

Answer: B

NEW QUESTION 19

You manage Microsoft System Center Virtual Machine Manager (SCVMM). You need to block specific packets on the virtual switch.
Which two types of virtual switch extensions can you use? Each correct answer presents a complete solution.
NOTE: Each correct selection is worth one point.

• A. capturing extensions
• B. forwarding extensions
• C. monitoring extensions
• D. filtering extensions

Answer: BD

Explanation:

References:
https://docs.microsoft.com/en-us/windows-hardware/drivers/network/overview-of-the-hyper-v-extensible-switch

NEW QUESTION 20

A company has a Microsoft System center virtual machine manager (SCVMM) environment. The company also uses System center operations manager (SCOM). You integrate SCVMM with SCOM.
You need to ensure that alerts, notifications and monitoring is synchronizing between SCVMM and SCOM. What should you do?

• A. Enable performance and resource optimization (PRO)
• B. Install the SCOM agent on the SCVMM management server
• C. Install the SCOM console on the SCVMM management server
• D. Enable maintenance and mode integration

Answer: A

Explanation:
PRO information is provided by Operations Manager, and can be VMM to optimize performance. You can map specific Operations Manager alerts to remedial actions in VMM. For example, you could migrate VMs to a different host after a hardware issue. In addition, with PRO enabled, Operations Managers can detect resource issues or hardware failures in the virtualization infrastructure.
References:
https://docs.microsoft.com/en-us/system-center/vmm/monitors-ops-manager?view=sc-vmm-1807

NEW QUESTION 21

You are the system administrator for a manufacturing company. You implement a new solution for your windows server.
The file system drivers for all servers offloaded data Transfers (ODX). You need to configure the servers.
Which four actions should you perform in sequence? Rearrange in correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
We can use the FLTMC command to list filter drivers and their supported features. If the value of the support Features registry key equals 3, then ODX is supported.
The Get-ItemProperty cmdlet gets the properties of the specified items.
References:
https://blogs.technet.microsoft.com/askcore/2014/06/26/is-offloaded-data-transfers-odx-working/ https://docs.microsoft.com/en-us/powershell/module/microsoft.powershell.management/get-itemproperty?view=

NEW QUESTION 22
......