NEW QUESTION 1
You have an image of Windows 10. The image contains a Windows Store app. You test the app and discover that the app fails to run correctly.
You need to verify the dependencies of the app. Which command or cmdlet should you run?

• A. Get-WindowsPackage
• B. Get-AppxPackage
• C. dism.exe /Get-Capabilities
• D. dism.exe /Get-AppxProvisionedPackage

Answer: C

NEW QUESTION 2
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series.
Information and details provided in a question apply only to that question. You attempt to deploy an image of Windows 10 to a new model of computers.
You discover that the deployment fails because of an unsupported mass storage device- You need to ensure mat Windows 10 can be deployed successfully to the new computers. Which parameter should you specify when you run dism.exe?

• A. /Add-Capability
• B. /Add-Driver
• C. /Add-Package
• D. /Add-ProvisionedAppxPackage
• E. /Capture-Image
• F. /Cleanup-Image
• G. /Export-Image
• H. /Split-Image

Answer: E

NEW QUESTION 3
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You are building a new image of Windows 10.
You need to specify how the hard disk will be partitioned during the Windows 10 installation. What should you do?

• A. Mount the Install.wim file.
• B. Mount the Boot.wim file.
• C. Modify the Winpeshl.ini file.
• D. Create an answer file.
• E. Modify the Windows.ini file.
• F. Create a provisioning package.
• G. Load a catalog file (.clg).
• H. Create a cabinet file (.cab).

Answer: D

NEW QUESTION 4
You deploy an image of Windows 10 to a reference computer. You update the image and are ready to reseal the image.
You need to create an image that can be deployed to several new computers. Which command should you run before you capture the image?

• A. sysprep.exe /audit /quiet
• B. sysprep.exe /quit /quiet
• C. sysprep.exe /generalize /oobe /shutdown
• D. sysprep.exe/oobe/restart

Answer: C

NEW QUESTION 5
You plan to preinstall Microsoft Office 2021 on several computers that will be sold to your customers. You need to pin Office tiles to the Windows 10 Start menu.
What should you do?

• A. Create a shortcut for each Office applicatio
• B. Copy the shortcuts to C:UsersDefaultAppDataRoamingMicrosoftWwindowsStart Menu.
• C. Create a shortcut for each Office application Copy the shortcuts to CProgram DataMicrosoftWindowsStart Menu.
• D. Create a Layout Modification.xml file in CUsersDefaultApp DataLocalMicrosoft\WindowsShellAdd the Append Office Suite and Append Office Suite Choice tags to the file.
• E. Create a Configuration.xml file in C:UsersDefaultAppDataLocarMicrosoftWindowsShell. Add the Append Office Suite and Append Office Suite Choice tags to the file.

Answer: A

NEW QUESTION 6
You have an image of Windows 10.
You obtain a feature update for Windows 10.
You need to include the feature update in the image. The solution must minimize the size of the image.
What should you do?

• A. Mount the imag
• B. Run dism.exe /Add-Package, and then run dism.exe /Optimize-Imag
• C. Unmount the image.
• D. Deploy the image to a compute
• E. Install the feature updat
• F. Optimize the drive, and then capture the image.
• G. Download the new installation media for Windows 10. Install Windows 10 on a computer, and then capture the image.
• H. Mount the imag
• I. Run dism.exe /Add-Package, and then run dism.exe /Cleanup-Wi
• J. Unmount the image.

Answer: C

NEW QUESTION 7
You are customizing a Windows Recovery Environment (Windows RE) image. You plan to customize the push-button reset experience by using extensibility scripts. You need to add a file to Windows RF that will execute at an extensibility point. Which extension should the file have?

• A. .Js
• B. .exe
• C. .vbs
• D. .msi

Answer: B

Explanation: https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/deploy-push-buttonreset- features

NEW QUESTION 8
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are building a new image of Windows 10 that contains a push-button reset solution. You need to test whether push-button reset works as expected.
Solution: From Windows 10, you press and hold the SHIFT key, and then you restart the computer. After the computer restarts, you click Troubleshoot, and then you click Reset this PC.
Does this meet the goal?

• A. Yes
• B. No

Answer: A

Explanation: References:
https://support.microsoft.com/en-us/help/12415/windows-10-recovery-options https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/push-button-resetoverview

NEW QUESTION 9
DRAG DROP
You plan to configure the push-button reset feature for an image of Windows 10 Pro. You add an application named CRM App to the image.
You need to capture CRM App to a siloed provisioning package.
How should you complete the command? To answer, drag the appropriate values to the correct locations. Each value may be used once, more than once, or not at all You may need to drag the splits bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation: ScanState.exe /apps :-sysdrive /o /v:13 / config:Config_AppsOnly.xml / ppkg e:repositorySPP_bs

NEW QUESTION 10
You have a computer named Computer1 that runs Windows 10.
On Computer1, you have a DVD that contains the installation source files of Windows 10 Pro. You open Windows System Image Manager as shown in the exhibit. (Click the Exhibit tab.)

You need to configure the answer file for Windows 10 by using Windows System Image Manager (Windows SIM).
What should you do first?

• A. Copy the installation files for Windows 10 to a hard disk.
• B. Create a catalog file (.clg).
• C. Select a distribution share.
• D. Select an image of Windows 10.

Answer: A

Explanation: References:
https://technet.microsoft.com/en-us/library/cc749317(v=ws.10).aspx

NEW QUESTION 11
You haw a WIM file named Image 1.wirn.Image 1.wim contains an image of Windows 10. You obtain the installation media for Microsoft Office 2021.
You need to install Office 7016 in the image in the least amount of time possible. What should you do?

• A. Deploy the image to a compute
• B. Run setup.ex
• C. Capture an image of the computer.
• D. Deploy the image to a compute
• E. Run dism.exe and specify the /Add-Provisioned Appx Package paramete
• F. Capture an image of the computer.
• G. Mount the image offlin
• H. Run dism.exc and specify theAdd-Provisioned Appx Package parameter.
• I. Mount the imag
• J. Run setup.ex
• K. Unmount the imag

Answer: B

NEW QUESTION 12
You have a server named Server1 that runs Windows Server 2021. Server1 is located on a network that is disconnected from the Internet.
You have a computer named Computer1 that runs Windows 10.
You download the Windows Assessment and Deployment Kit (Windows ADK) setup on Computer1. You need to create an installation source on a USB drive that can be used to install Windows ADK on Server1.
Which installation option should you use when you run the Windows ADK setup on Computer1?

• A. /list
• B. /layout
• C. /ceip
• D. /features
• E. /installpath

Answer: B

Explanation: References:
https://technet.microsoft.com/en-gb/library/dn621908.aspx

NEW QUESTION 13
Note: This question is part of a series of questions that use the same or similar answer choices. An answer choice may be correct for more than one question in the series. Each question is independent of the other questions in this series. Information and details provided in a question apply only to that question.
You have a computer named Computer1 that runs Windows 10. Computer1 has the Windows Assessment and Deployment Kit (Windows ADK) installed.
You create the working directories for the customization of a Windows Preinstallation Environment (Windows PE) image.
You need to modify the regional setting used in Windows PE. What should you do first?

• A. Mount the Install.wim file.
• B. Mount the Boot.wim file.
• C. Modify the Winpeshl.ini file.
• D. Create an answer file.
• E. Modify the Windows.ini file.
• F. Create a provisioning package.
• G. Load a catalog file (.clg).
• H. Create a cabinet file (.cab).

Answer: B

Explanation: References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/winpe-add-packages-- optional-components-reference

NEW QUESTION 14
You have a computer named Computer 1.
You deploy a custom image of Windows 10 to Computer 1.
You need to verify whether Windows Recovery Environment (Windows RE) is enabled on Computer
1.Which command should you run?

• A. dism.exe
• B. bcdboot.exe
• C. reagent.exe
• D. msconfig.exe

Answer: C

NEW QUESTION 15
DRAG DROP
You plan to deploy a new image of the 64-bit version of Windows 10 by using an answer file. You need to add your company's OEM information to the answer file.
What should you modify in the answer file? To answer, drag the appropriate values to the correct locations. Each value may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
NOTE: Each correct selection is worth one point.

Answer:

Explanation:

NEW QUESTION 16
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains a unique solution that might meet the stated goals. Some question sets might have more than one correct solution, while others might not have a correct solution.
After you answer a question in this sections, you will NOT be able to return to it. As a result, these questions will not appear in the review screen.
You are configuring a reference computer for a new UEFI-based deployment image of the 64-bit version of Windows 10. The reference computer has two physical hard disk drives.
You need to configure a partition on Disk 0 to support a recovery partition. Solution: You create a primary partition of 250 MB that uses the NTFS file system. Does this meet the goal?

• A. Yes
• B. No

Answer: B

Explanation: This partition must be at least 300 MB References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/configure-uefigptbased- hard-drive-partitions

NEW QUESTION 17
HOTSPOT
You extract an image of Windows 10 in audit mode to a computer named Computer1. You install an application named App1 on Computer1.
You need to create a siloed provisioning package of App1.
How should you create the package? To answer, select the appropriate options in the answer area. NOTE: Each correct selection is worth one point.

Answer:

Explanation:
References:
https://docs.microsoft.com/en-us/windows-hardware/manufacture/desktop/add-desktop-appswith-spps-sxs

NEW QUESTION 18
You have an image of Windows 10 that runs the Windows 10 Anniversary Update. You plan to deploy the image to several new computers.
You add Microsoft Office 2021 to the image.
You need to ensure that when the image is deployed, users will see the Office 2021 tiles on the Start menu as shown in the exhibit. (Click the Exhibit tab.)

What should you do?

• A. Create a LayoutModification.xml file and save the file in the C:UsersDefaultAppDataLocalMicrosoftWindowsShell folder.
• B. Modify the DefaultLayouts.xml file and save the file in the C:UsersDefaultAppDataLocalMicrosoftWindowsApps folder.
• C. Modify the DefaultLayouts.xml file and save the file in the C:UsersDefaultAppDataLocalMicrosoftWindowsShellfolder.
• D. Create a LayoutModification.xml file and save the file in the C:UsersDefaultAppDataLocalMicrosoftWindowsApps folder.

Answer: A