NEW QUESTION 1

Which of the following is true with respect to recovery from failure with automatic pinning that is configured on a cluster of Cisco Unified Computing System 62XX Fabric Interconnects?

• A. By default, server MAC addresses are pinned to uplink interfaces using PIN groups.
• B. When a northbound fabric interconnect link goes down, the affected servers will use NIC teaming to re-establish connectivity on the second fabric interconnect.
• C. When a northbound fabric interconnect link goes down, the fabric interconnect will send a gratuitous ARP to the northbound switch to announce the servers on the new port.
• D. In the event that all uplink ports on the fabric interconnect lose connectivity, the 22XX I/O module shuts down all of the host ports until at least one uplink is restored.

Answer: C

NEW QUESTION 2

If there are four I/O module links from the Cisco Unified Computing System 5108 Blade Chassis to the Cisco Unified Computing System 6248UP Fabric Interconnect, which dynamic vNICs can be defined?

• A. 9
• B. 16
• C. 24
• D. 48
• E. 54
• F. 112

Answer: E

NEW QUESTION 3

Which two statements are true concerning the role-based access control specifics of a Cisco Unified Computing System? (Choose two.)

• A. By default, user accounts expire after 90 days; a warning message will he generated 10 days prior to expiration.
• B. A locally authenticated user account is any user account that is authenticated through LDAP, RADIU
• C. or TACACS+.
• D. A user that is assigned one or more roles will be allowed the privileges that are consistent across all of the assigned roles.
• E. All roles include read access to all configuration settings in the Cisco Unfiled Computing System domain.
• F. If a user maintains a local user account and a remote user account simultaneously, the roles that are defined in the local user account override those that are maintained in the remote user account.

Answer: DE

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/AdminManagem

NEW QUESTION 4

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 5

A service profile is created using vHBAs. What will happen if the profile is applied to a server with a mezzanine card without storage capability?

• A. The blade association will fail.
• B. The storage adapter will not be visible to the operating system.
• C. A virtual storage adapter will be created.
• D. A WWNN or a WWPN will be autoselected from the default pool.

Answer: A

Explanation:
https://supportforums.cisco.com/t5/data-center-blogs/c-series-resolve-service-profile-association-failure-when/b https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/UCSM_GUI_Configuration In addition to any guidelines or recommendations that are specific to policies and pools included in service
profiles and service profile templates, such as the local disk configuration policy, you need to be aware of the following guidelines and recommendations that impact the ability to associate a service profile with a server.

NEW QUESTION 6

Refer to the exhibits.

The blade server has two HBAs. How many WWPN targets on VSAN 2001 are accessible to the blade server?

• A. 1
• B. 2
• C. 3
• D. 4

Answer: B

NEW QUESTION 7

Which two are true with respect to the switching modes on the Cisco Unified Computing System 62XX Fabric Interconnect? (Choose two.)

• A. End-host mode presents a link to a northbound uplink switch as a host trunk with loop detection that is provided by STP.
• B. For northbound traffic, server MAC addresses are statically pinned to an uplink; the return path is controlled by the unified fabric switches.
• C. A fabric interconnect port in Ethernet switching mode appears to the uplink switch as a host with many MAC addresses.
• D. Server-to-server traffic on a common VLAN are locally switched by the fabric interconnect and not the northbound switches.
• E. A MAC forwarding table is not used to forward traffic to the uplink switch.
• F. A MAC address forwarding table is maintained for server-to-server communications across VLANs.

Answer: DE

NEW QUESTION 8

Which three options are needed when configuring local zoning on the Cisco UCS Fabric Interconnects? (Choose three.)

• A. The fabric interconnects are operating in FC switching mode.
• B. The fabric interconnects are operating in FC end-host mode.
• C. SAN connectivity policy
• D. storage connection policy
• E. FC target endpoints
• F. iSCSI target endpoints

Answer: ADE

NEW QUESTION 9

This question concerns provisioning a workload on a Cisco UCS System. Drag the options on the left to the right side in the correct order.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 10

Which configuration must be made to run the fabric interconnects as a vPC pair?

• A. The Ethernet mode must be set to switching.
• B. The Layer 1 and Layer 2 cables must be configured as a vpc
• C. The fabric interconnects cannot run as a VPC pair
• D. The ethernet mode must be set to end host

Answer: C

Explanation:
https://supportforums.cisco.com/t5/unified-computing-system/benefits-to-vpc-on-6200s-fabric-interconnects-inu

NEW QUESTION 11

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 12

Which description of an import operation in Cisco UCS Manager is true?

• A. You can perform an import while the system is up and running.
• B. You can import only a configuration file that was exported from the same Cisco UCS Manager.
• C. You can import a configuration from a higher release to a lower release.
• D. You can schedule an import operation.

Answer: A

Explanation:
You can perform an import while the system is up and running.
You can import any configuration file that was exported from Cisco UCS Manager. The file does not need to have been exported from the same Cisco UCS Manager. You cannot schedule an import operation.
Reference: https://www.cisco.com/en/US/docs/unified_computing/ucs/sw/gui/config/guide/141/
UCSM_GUI_Configuration_Guide_141_chapter43.html#task_B89DEDCFCDE54E9C81E67C53FAC4DEC6 https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/AdminManagem b_Cisco_UCS_Admin_Mgmt_Guide_3_1_chapter_01001.pdf
You cannot import configuration from a higher release to a lower release.

NEW QUESTION 13

Refer to the Exhibit:

You are integrating Cisco UCS Director with the ACI fabric. Where do you create the account type?

• A. Pods
• B. Managed Network Elements
• C. Multi-Domain Managers
• D. Bare Metal Agents

Answer: C

NEW QUESTION 14

How does a Cisco Unified Computing System react when configured for disjoint Layer 2 domains?

• A. Automatic pinning is disabled; VLAN membership must be statically pinned to the uplink ports.
• B. VLANs must be divided between the fabric interconnects using PIN groups.
• C. The VLAN traffic for a disjoint network can only travel along an uplink that is specifically assigned to this VLAN and is selectively excluded from all other uplinks.
• D. When you configure disjoint Layer 2 networks, you must assign VLANs to uplink interfaces.

Answer: C

NEW QUESTION 15

Which option describes what Cisco Integrated Management Controller Network Security provides?

• A. protection against DDoS on the Cisco IMC
• B. a whilelist that specifies the servers allowed to access the Cisco IMC
• C. 802.1x support, allowing the Cisco IMC to log in to a port security network
• D. user-configured ACLs to block known bad servers from accessing the Cisco IMC

Answer: A

NEW QUESTION 16

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 17

Drag and drop the scripting tools on the left to the correct definitions on the right.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Cisco UCS Python SDK
(provides complete suppport for cisco ucs manager XML PAI calls,is installed as a Vm,and can be used to import and replicate existing cisco ucs manager and physical inventory )
Cisco UCS Platform Emulator
(is a module for widely used,general-purpose,high-level programming language that helps automate and manage configuration within cisco ucs manager ,including service profiles,policies ,pools,equipment,am=nd network and storage management)
Cisco UCS Automation Tool
(converts Cisco UCS Manager actions into automation scripts and captures Cisco UCS Manager actions in XML to use in any programming language that has variables )
Cisco UCS PowerTool Suite
(is a set of Powershell modules for cisco ucsmanager,cisco IMC and cisco ucs Central that aids in configuration and management of cisco ucs domains and solutions )

NEW QUESTION 18

You are configuring service profiles for a Cisco UCS system. What are three types of logical resource pools? (Choose three.)

• A. UUID
• B. MAC
• C. VLAN
• D. WWN
• E. VXLAN
• F. FC

Answer: ABD

Explanation:
Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/gui/config/guide/2-2/b_UCSM_GUI_Configu https://www.safaribooksonline.com/library/view/ccna-data-center/9780133860429/ch15lev2sec3.html

NEW QUESTION 19

Refer to the exhibit.

Which result of implementing the maintenance policy is true?

• A. The FSM applies the waiting changes when the host OS resets.
• B. The Cisco UCS server reboots as soon as the change is made to the service profile.
• C. The Cisco UCS server reboots at a scheduled time.
• D. The Cisco UCS server reboots 300 seconds after the policy is applied.

Answer: A

NEW QUESTION 20

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:

NEW QUESTION 21

Refer to the exhibit.

Which result of configuring ServiceProfile 1 is true?

• A. It upgrades the firmware immediately.
• B. It restricts editing of ServiceProfile 1 to the members of the user 1 group.
• C. It associates the fw 1 firmware policy to ServiceProfile 1.
• D. It sets the firewall policy on the host to fw 1.

Answer: C

NEW QUESTION 22

In an environment where multiple LDAP servers are used for user authentication, which Cisco UCS Manager feature must be configured?

• A. LDAP Locale
• B. Organization
• C. LDAP Provider Group
• D. Authentication Domain

Answer: D

Explanation:
For implementations involving multiple LDAP databases, configure an LDAP instance. Reference:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/sample_configurations/UCSM_1_4_LDAP_w https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/ucs-manager/GUI-User-Guides/AdminManagem

NEW QUESTION 23

You plan to use AAA security services for a Cisco UCS Fabric Interconnect. Which two authentication protocols can you use? (Choose two.)

• A. NTLM
• B. Kerberos
• C. RADIUS
• D. Diameter
• E. LDAP

Answer: CE

Explanation:
Cisco UCS supports two methods to authenticate user logins:
Through user accounts local to Cisco UCS Manager. Remotely through one of the following protocols: LDAP
RADIUS TACACS+
Reference:
https://supportforums.cisco.com/t5/security-documents/ucs-fabric-intreconnect-integration-withacs-5-4-tacacs/ta

NEW QUESTION 24

You plan to register a Cisco UCS domain to a Cisco UCS Central system UCS Central with determine the policy configuration. Which policy resolution mode must you use when you register the UCS domain?

• A. Global
• B. Private
• C. Local
• D. Central

Answer: A

Explanation:
https://www.cisco.com/c/en/us/td/docs/unified_computing/ucs/sw/cli/config/guide/2-2/b_UCSM_CLI_Configur

NEW QUESTION 25

Which options are valid port types when configuring fixed 10-Gb LAN interfaces on the Cisco UCS 6200 Series Fabric Interconnects? (Choose three.)

• A. monitoring port
• B. server port
• C. uplink Ethernet port
• D. FEX port
• E. Fibre Channel storage port

Answer: ABC

NEW QUESTION 26
......