201 Exam Questions - Online Test


201 Premium VCE File

Learn More 100% Pass Guarantee - Dumps Verified - Instant Download
150 Lectures, 20 Hours

certleader.com

we provide Top Quality F5-Networks 201 answers which are the best for clearing 201 test, and to get certified by F5-Networks TMOS Administration. The 201 Questions & Answers covers all the knowledge points of the real 201 exam. Crack your F5-Networks 201 Exam with latest dumps, guaranteed!

Online 201 free questions and answers of New Version:

NEW QUESTION 1
A BIG-IP Administrator is creating a new Trunk on the BIG-IP device. What objects should be added to the new Trunk being created?

  • A. Interfaces
  • B. Network routes
  • C. VLANS
  • D. IP addresses

Answer: A

Explanation:
trunk is a portchannel, you need to add a physical interface.

NEW QUESTION 2
A configuration change is made on the standby member of a device group.
What is displayed as "Recommended Action" on the Device Management Overview screen?

  • A. Force active member of device group to standby
  • B. Activate device with the most recent configuration
  • C. Synchronize the active member configuration to the group.
  • D. Synchronize the standby member configuration to the group

Answer: D

NEW QUESTION 3
Refer to the exhibit.
201 dumps exhibit
A BIG-IP Administrator creates a new Virtual Server. The end user is unable to access the page. During troubleshooting, the administrator learns that the connection between the BIG-IP system and server is NOT set up correctly.
What should the administrator do to solve this issue?

  • A. Disable Address Translation
  • B. Set Address Translation to Auto Map, configure a SNAT pool, and have pool members in the same subnet of the servers
  • C. Set Address Translation to SNAT and configure a specific translation address
  • D. Set Address Translation to SNAT and have self-IP configured in the same subnet of servers

Answer: C

Explanation:
The status of the pool can be seen that the members are all up, indicating that the network from F5 to the server is no problem, so there is no need to configure selfip on the same subnet. The monitor is normal but the access is not normal, you have to consider the problem of snat, you can configure automap or configure snat and specify snat ip.

NEW QUESTION 4
Refer to the exhibit
201 dumps exhibit
A connection is being established to IP 1.1.1.1 on port 8080. Which virtual server will handle the connection?

  • A. fwd_8080_vs
  • B. host_vs
  • C. host_ 8080_VS
  • D. fwdvs

Answer: B

NEW QUESTION 5
A site is load balancing to a pool of web servers. Which statement is true concerning BIG IP's ability to verify whether the web servers are functioning properly or not?

  • A. Web server monitors can test the content of any page on the server.
  • B. Web server monitors always verify the contents of the index.html page.
  • C. Web server monitors can test whether the server's address is reachable, but cannot test a page's content.
  • D. Web server monitors can test the content of static web pages, but cannot test pages that would require the web server to dynamically build content.

Answer: A

NEW QUESTION 6
A virtual server is listening at 10.10.1.100:any and has the following iRule associated with it:
when CLIENT_ACCEPTED { if {[TCP::local_port] equals 80 } { pool pool1 } elseif {[TCP::local_port] equals 443} { pool pool2 }
If a user connects to 10.10.1.100 and port 22, which pool will receive the request?

  • A. pool1
  • B. pool2
  • C. Non
  • D. The request will be dropped.
  • E. Unknow
  • F. The pool cannot be determined from the information provided.

Answer: D

NEW QUESTION 7
A BIG-IP Administrator needs to apply a license to the BIG-IP system to increase the user count from the base license.
Which steps should the BIG-IP Administrator?

  • A. System License > Re-activate> Add-On Registration> Edit
  • B. System > License > Re-activate > Base Registration> Edit
  • C. Device Management > Devices > Select BIG-IP System > Update
  • D. System > Configuration >Device > General

Answer: A

NEW QUESTION 8
Which VLANs must be enabled for a SNAT to perform as desired (translating only desired packets)?

  • A. The SNAT must be enabled for all VLANs.
  • B. The SNAT must be enabled for the VLANs where desired packets leave the BIG-IP.
  • C. The SNAT must be enabled for the VLANs where desired packets arrive on the BIG-IP.
  • D. The SNAT must be enabled for the VLANs where desired packets arrive and leave the BIG-IP.

Answer: C

NEW QUESTION 9
Which is an advantage of terminating SSL communication at the BIGIP rather than the ultimate web server?

  • A. Terminating SSL at the BIG-IP can eliminate SSL processing at the web servers.
  • B. Terminating SSL at IP the eliminates BIG all unencrypted traffic from the internal network.
  • C. Terminating SSL at the BIG-IP eliminates the need to purchase SSL certificates from a certificate authority.
  • D. Terminating SSL at the BIG-IP eliminates the need to use SSL acceleration hardware anywhere in the network.

Answer: A

NEW QUESTION 10
A new BIG-IP VE is deployed with default settings. The BIG-IP Administrator completes the setup utility in the Configuration Utility. The internal self IP address fails to respond to a ping request. What is a possible cause of this issue?

  • A. Port lockdown on internal self IP is set to Allow None
  • B. Route is NOT assigned to internal self IP.
  • C. Internal interface VLAN is set to untagged
  • D. Internal interface VLAN is set to tagged

Answer: D

NEW QUESTION 11
A 8IG-IP Administrator is making adjustments to an iRule and needs to identify which of the 235 virtual
server configured on the BIG-IP device will be affected.
How should the administrator obtain this information in an effective way?

  • A. Local Traffic > Virtual Server
  • B. Local traffio Pools
  • C. LOCAL Traffic > Network Map
  • D. Local traffic > Rules

Answer: C

NEW QUESTION 12
A BIG-IP Administrator is unable to connect to the management interface via HTTPS. What is a possible reason for this issue?

  • A. The port lockdown setting is configured to Allow None.
  • B. An incorrect management route is specified.
  • C. The IP address of the device used to access the management interface is NOT included in the "P Allow" list in the Configuration Utility.
  • D. The IP address of the device used to access the management interface is NOT included in the "httpd Allow" list in the CLI.

Answer: D

NEW QUESTION 13
Refer to the exhibit
The BIG-IP Administrator is unable to access the management console via Self-IP 10.10 1.33 and port 443. What is the reason for this problem?

  • A. Packet Filter needs to be configured to allow a source
  • B. Self IP is configured to allow TCP All
  • C. Self IP is configured to allow UDP 443
  • D. Packet Filter is configured to allow port 443

Answer: C

NEW QUESTION 14
What should the 816-IP Administrator provide when opening a new ticket with F5 Support?

  • A. bigip.license file
  • B. QKViewfile
  • C. Device root password
  • D. SSL private keys

Answer: B

NEW QUESTION 15
A BIG-IP Administrator is informed that traffic on Interface 1.1 is expected to increase over the maximum bandwidth capacity on the link. There is a single VLAN on the Interface. What should the 8IG-IP Administrator do to increase the total available bandwidth?

  • A. Assign two Interfaces to the VLAN
  • B. Set the media speed of Interface 1.1 manually
  • C. Create a trunk object with two Interfaces
  • D. Increase the MTU on the VLAN using Interface 1.1

Answer: C

NEW QUESTION 16
A virtual server is defined using a source address based persistence profile. The last five connections were A, B, C, A, C . Given the conditions shown in the graphic, if a client with IP address 205.12.45.52 opens a connection to the virtual server, which member will be used for the connection?

  • A. 10.10.20.1:80
  • B. 10.10.20.2:80
  • C. 10.10.20.3:80
  • D. 10.10.20.4:80
  • E. 10.10.20.5:80

Answer: B

NEW QUESTION 17
One of the two members of a device group has been decommissioned. The BIG-IP Administrator tries to delete the device group, but is unsuccessful.
Prior to removing the device group, which action should be performed?

  • A. Disable the device group
  • B. Remove all members from the device group
  • C. Remove the decommissioned device from the device group
  • D. Make sure all members of the device group are in sync

Answer: B

NEW QUESTION 18
What is the purpose of provisioning?

  • A. Provisioning allows modules that are not licensed to be fully tested.
  • B. Provisioning allows modules that are licensed be granted appropriate resource levels.
  • C. Provisioning allows the administrator to activate modules in nonstandard combinations.
  • D. Provisioning allows the administrator to see what modules are licensed, but no user action is ever required.

Answer: B

NEW QUESTION 19
......

Thanks for reading the newest 201 exam dumps! We recommend you to try the PREMIUM Certshared 201 dumps in VCE and PDF here: https://www.certshared.com/exam/201/ (254 Q&As Dumps)