NEW QUESTION 1

When writing new App in Tropo, in what format should the App Script be saved/

• A. .xml
• B. .json
• C. .js
• D. .mp4

Answer: C

NEW QUESTION 2

Which layer of the OSI model is associated with the reliable transmission of datagrams?

• A. Datagram
• B. Routing
• C. Network
• D. Data link
• E. Transport
• F. Transmission
• G. Session

Answer: E

Explanation:
http://en.wikipedia.org/wiki/Transport_layer

NEW QUESTION 3

Which system users intelligent Audio to cancel out background noise?

• A. DX70
• B. DX80
• C. Spark
• D. Jabber

Answer: B

NEW QUESTION 4

What layer of the OSI Model provides the logical addressing that routers use for path determination?

• A. transport
• B. network
• C. application
• D. presentation

Answer: B

NEW QUESTION 5

Which Cisco UCS power policy mode enables a configuration that can tolerate the loss of an input power circuit?

• A. nonredundatnt
• B. Grid
• C. N+1 in normal mode
• D. N+1 in high-density mode

Answer: B

Explanation:
Grid Redundant (N+N) – below: The purpose of the grid redundant mode is to enable a configuration that can tolerate the loss of either a power supply or a input power circuit. In grid-redundant mode the system can withstand the loss of any two power supplies. The Figure 5 shows the required wiringScheme for Grid Redundant power where N=2.

NEW QUESTION 6

Which statement about the HSRP protocol is true?

• A. Multiple routers in an HSRP group are in an active state, to enable round-robin load balancing of traffic
• B. In Cisco NX-O
• C. HSRP is configured to pre-empt by default
• D. HSRP version 2 is an open standard protocol that is described in RFC 2281
• E. One router in an HSRP group is in an active stat
• F. All other routers are in a standby state or listening state

Answer: C

NEW QUESTION 7








Which statement regarding Cisco Nexus 5000 Series switches is true?

• A. Cisco Nexus 5000 Series switches operate in r routing mode.
• B. Cisco Nexus 5000 Series switches operate in FCoE mode.
• C. Cisco Nexus 5000 Series switches operate in fabric mode.
• D. Cisco Nexus 5000 Series switches operate in NPV mode.

Answer: C

NEW QUESTION 8

Which two addresses represent multicast addresses? (Choose two.)

• A. 224.1.47.5
• B. 240.100.22.3
• C. FF05::1
• D. 2001::1

Answer: AC

NEW QUESTION 9

A customer wants to connect to their SAN via Fibre Channel. Which two devices can be used to provide connectivity? (Choose two.)

• A. Cisco Nexus 5548UP Switch
• B. Cisco MDS 9148 Multilayer Fabric Switch
• C. Cisco Nexus 2248TP GE Fabric Extender
• D. Cisco Catalyst 6509 Switch
• E. Cisco Nexus 7010 Switch

Answer: AB

NEW QUESTION 10

A network engineer needs to configure an SVI on a Cisco Nexus Series switch After configuring VLAN 10, which set of commands must the engineer enter, to complete the SVI configuration?
A)

B)

C)

D)

• A. Option A
• B. Option B
• C. Option C
• D. Option D

Answer: D

NEW QUESTION 11

Which protocol is used for an immersive telepresence meeting?

• A. H.239
• B. Assent
• C. TIP
• D. H.323

Answer: C

NEW QUESTION 12

Refer to the exhibit.

How many broadcast domains are represented'?

• A. 1
• B. 2
• C. 3

Answer: D

NEW QUESTION 13

Which VTP mode disallows the creation of local VLANs?

• A. transparent
• B. tunneling
• C. server
• D. client
• E. off
• F. native

Answer: D

Explanation:
"A VTP client behaves like a VTP server and transmits and receives VTP updates on its trunks, but you cannot create, change, or delete VLANs on a VTP client. VLANs are configured on another switch in the domain that is in server mode."
http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_52_se/configuration/guide/s

NEW QUESTION 14

Which conferencing solution is designed for scalable meetings, training and events?

• A. Spark
• B. Telepresence Server
• C. Cisco Meeting Server
• D. Cisco WebEx

Answer: D

NEW QUESTION 15

Drag and drop the transceiver type on the left to the correct use on the right.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Connects a copper Gigabit Ethernet port on a server to a switch = 1000BASE-T SFP Support link length up to 5 meters = SFP+ passive copper twinx
Connects two devices using a single strand of fiber = SFP bidirectional
Support a link length of 10 kilometers using standard single-mode fiber = LR SFP+ Connect two devices using 40 gigabit Ethernet ports = QSFP

NEW QUESTION 16

Which protocol is used to encapsulate Fibre Channel frames, enabling them to be transmitted over Ethernet networks?

• A. FCoE
• B. DCB
• C. SCSI
• D. Ethernet SAN

Answer: A

NEW QUESTION 17

Which management solution works with endpoints registered to UCM, VCS and Expressway?

• A. TMS
• B. Time
• C. CMA
• D. CMR

Answer: B

NEW QUESTION 18

For which reason would you implement a VSAN?

• A. to overcome the limitations of zoning
• B. to virtualize storage
• C. to segment the physical fabric into multiple logical fabrics
• D. to overcome the limitations of LUN masking

Answer: C

NEW QUESTION 19

Which two options describe what can happen when devices are in the same broadcast domain? (Choose two.)

• A. They are on the same VLAN and the same switch.
• B. They are on different VLANs and the same switch.
• C. They are on different VLANs and different switches.
• D. They are on the same VLAN and different switches.

Answer: AD

NEW QUESTION 20

Refer to the exhibit.

What is the result when you run the command?

• A. All switches in the fabric receive the active zone set.
• B. The zone set is activated on the switch only.
• C. On the reboot, all switches in the fabric receives the active zone set.
• D. The default zone set is activated on all switches in the fabric.

Answer: B

NEW QUESTION 21

What is the command sequence to force a Cisco Nexus 6000 switch to boot using the golden BIOS image?

• A. Press Ctrl-Shift-6 within 30 seconds of when power is supplied to the switch.
• B. Press Ctrl-] within 2 seconds of when power is supplied to the switch.
• C. Press Ctrl-] within 30 seconds of when power is supplied to the switch.
• D. Press Ctrl-Shift-6 within 2 seconds of when power is supplied to the switch.

Answer: D

NEW QUESTION 22

7K-3 and 7k-4 have the following configuration.
Spanning-tree mst 1 priority 24576 Spanning-tree mst configuration name DCICN
revision 2
instance 1 vlan 100-150
Which of the following statements is true about the network?

• A. 7K-3 is the mst root for VLANs 100-150
• B. 7k-4 is the mst root for VLANs 100-150
• C. Both 7k-3 and 7k-4 are the root for VLANs 100-150
• D. MST is not enabled on 7k-3 and 7k-4

Answer: D

NEW QUESTION 23

Which statement is true regarding endpoint registration authentication?

• A. When a Subzone is a set for ''Treat as Authenticated''. the endpoint is require to have the correct authentications configured.
• B. Expressways and Endpointdo not need to be synchronized with identical NTP timestamps
• C. SIP endpoints always need authentication credentials.
• D. Authentication credentials can be stored in the database of the Expressway.

Answer: D

NEW QUESTION 24

Drag the component on the left to the TCP/IP layer it corresponds to a the right,.Not all options are used.

• A. Mastered
• B. Not Mastered

Answer: A

Explanation:
Transport protocol: TCP
UDP
Network : IP address ethernet Data Link:
Mac Address router

NEW QUESTION 25

What are two physical components of the Cisco UCS B-Series server? (Choose two.)

• A. mezzanine slots
• B. power supplies (maximum of two)
• C. lockable front door
• D. redundant hot swappable fans
• E. CPU sockets

Answer: AD

NEW QUESTION 26

Whichtype of API is used to configure settings on the Cisco Meeting Server?

• A. XML-RPC
• B. SOAP
• C. REST
• D. XMP-RPC

Answer: C

NEW QUESTION 27

Which field in an Ethernet II frame performs the same function as the DSAP field in an 802.3 Ethernet frame?

• A. Start of frame
• B. EtherType
• C. Frame check sequence
• D. Subnetwork Access Protocol
• E. Logical Link Control

Answer: B

NEW QUESTION 28


Refer to the exhibit. Which command allows the Cisco Nexus 5000 switch to continue to start up?

• A. switch(boot)# load n5000-uk9.5.2.1.N1.4.bin
• B. switch(boot)# configure terminalswitch(boot-config)# admin-password Cisco123
• C. switch(boot)# load n5000-uk9-kickstart.5.2.1.N1.4.bin
• D. switch(boot)# load system-latest

Answer: A

NEW QUESTION 29

What is the only WebEx product that can used in a CMR Cloud solution?

• A. Cisco WebEx Support Center
• B. Cisco WebEx Training Center
• C. Cisco WebEx Meeting Center
• D. Cisco WebEx Event Center

Answer: C

NEW QUESTION 30
......