NEW QUESTION 1
The physical inventory process is carried out for a particular inventory organization with the following parameters:
Negative quantity Tolerance Percentage is set to 10%
Approval Type = ‘Always’
The system says that there are 100 on band, but you only counted 95. What will happen?

• A. The setup is invalid; it will give an error message.
• B. Because the 95 is within the 10% tolerance, it will post without approval.
• C. The system will ask a user to recount before posting.
• D. An approval will be required before posting.

Answer: B

NEW QUESTION 2
As part of implementing Oracle Cloud for your customer, you defined multiple Business Units. The customer wants you to define an Inventory Organization that is associated with all the business units and not just one particular business unit.
How do you achieve this?

• A. Define the Inventory Organization without associating it with any location.
• B. Leave the Management Business Unit field blank in the Inventory Organization definition.
• C. Leave the Profit Center Business Unit field blank in the Inventory Organization definition.
• D. It is not possible to define an Inventory Organization that is associated with more than one business unit.

Answer: D

NEW QUESTION 3
Given a JSL document describing a batch job:

How do you initiate a batch job?

• A. Get the JobExecution object from BatchRuntime and call its start() method.
• B. Get the JobExecution object from BatchRuntime and set its status to JobStatus.INITIATED.
• C. Get the JobOperator object from BatchRuntime and call its start() method.
• D. Call BatchRunTime.initialize(“ProductLoadJob”);

Answer: A

NEW QUESTION 4
Which class do you use to handle an incoming JSON Message as a stream?

• A. JsonReader
• B. JsonObjectBuilder
• C. JsonParser
• D. JsonObject

Answer: A

NEW QUESTION 5
Given the code sample:

And:

And:

And the next fragment from beans.xml:

And this injection point:
@Inject GenericMessenger messageHandler;
Which type would be injected at run time and referenced by the messageHandler variable?

• A. SmsHandler
• B. MsgHandler
• C. None of the abov
• D. An exception would be thrown due to ambiguous bean references.
• E. GenericMessenger

Answer: D

NEW QUESTION 6
Given the code fragment:

How are transactions managed?

• A. through a single shared transaction across the connection factory
• B. through a separate transaction per JMS Consumer
• C. through a single transaction for the entire JMS Topic
• D. through a single shared transaction in the JMS Context

Answer: D

NEW QUESTION 7
Given the code fragment:

When the context root is requested http://host:port/context, how does the container resolve this mapping?

• A. thirdServlet handles the request.
• B. firstServlet handles the request.
• C. The container throws an error at startup.
• D. secondServlet handles the request.

Answer: C

NEW QUESTION 8
Your organization is using min-max planning to replenish stock and the planning parameters are set at item organization level with a default subinventory.
Item: A, Min Qty: 25, Max Qty: 150 and Current Level: 20
The item above is purchased from a supplier. Although there is subinventory on hand, the subinventory is below the minimum required level. This should trigger a Min-Max report entry, but the requisition is not generated. Why?

• A. Fixed lot multiplier is not set.
• B. No value has been set for the “Min-Max Replenishment Reorder Approval” profile.
• C. Min-Max planning can be performed at the Organization level.
• D. Rounding the Reorder Quantity is disabled.
• E. Item is not defined in Manage Item Subinventories.

Answer: E

NEW QUESTION 9
Which statement is true about the relationship between HTTP and WebSockets?

• A. A WebSocket connection is a bi-directional HTTP session with message-handling support.
• B. A WebSocket connection is initialized with an HTTP handshake.
• C. A WebSocket connection can be initialized by either client or server.
• D. A WebSocket connection uses HTTP protocol to exchange data with the browser.

Answer: D

NEW QUESTION 10
Your customer decides to implement Cloud Procurement and Inventory. While discussing with your customer, you come to know that they have a business that spans across multiple locations and they have warehouse situated across USA and Canada.
All their procurement, payables, and distribution activities take place from USA.
They have a central warehouse in USA and after the goods are delivered to this warehouse, they are distributed across multiple additional warehouses. The warehouses are managed separately from the requisitioning units.
For requesting material they have two units. One located in USA that monitors the current stock. They are responsible for creating requisition for any material shortage in USA. They have another location in Canada for requesting material.
Which setup fulfills this scenario?

• A. BU1: USA - as procurement and requisitioning Business Unit (BU)BU2: Canada - as requisitioning Business UnitDefine Service provider relationship where Canada procurement business unit serves as procurement and payables service provider for Canada Requisitioning Business Unit.
• B. BU1: USA - as procurement business unit (BU)BU2: Canada - as requisitioning business unitBU3: USA- as requisitioning business unitDefine Service provider relationship where USA procurement business unit serves as procurement and payables service provider for Canada Requisitioning Business Unit.
• C. BU1: USA - as procurement business unit (BU)BU2: Canada - as requisitioning business unitBU3: USA- as requisitioning business unitDefine Service provider relationship where Canada procurement business unit serves as procurement and payables service provider for Canada Requisitioning Business Unit.
• D. BU1: USA - as procurement business unit (BU)BU2: Canada - as requisitioning business unitBU3: USA- as requisitioning business unitDefine Service provider relationship where USA procurement business unit serves as procurement and payables service provider for both Canada and USA requisitioning Business Units.

Answer: A

NEW QUESTION 11
While performing the task “Create Chart of Accounts, Ledger, Legal Entities, and Business Units in Spreadsheet Task”, you mentioned that the legal entity country is the United States of America.
What will be the functional currency of the ledger you are defining?

• A. The system will ask the user to provide functional currency at the time of uploading the spreadsheet if it is not provided in the first place.
• B. The system will automatically pick “USD” as functional currency from the legal entity country.
• C. The system will pock the first available currency from the list of Values.
• D. It is mandatory to provide functional currency, because ledger cannot be defined without functional currenc
• E. The system will throw an error upon processing.
• F. It is mandatory to provide functional currency because ledger cannot be defined without functional currenc
• G. The system will throw an error upon upload of the spreadsheet because all required fields are not populated.

Answer: B

NEW QUESTION 12
Your organization is planning for a periodic counting of individual items automatically throughout the course of the year. As part of this activity, the user has loaded items to the cycle count but some of the items are not being considered when count schedules and count sequences are not generated.
Identify two reasons that explain why the items are not being considered.

• A. The ABC assignment group is not defined.
• B. The Include in Schedule option is not selected to include the item for auto-scheduling.
• C. The Cycle Count Enabled flag is not selected for the inventory organization.
• D. The Cycle Count Enabled flag is not selected for the item.
• E. The approval controls are not set up.

Answer: DE

NEW QUESTION 13
You are a shop floor manager and you have received an order which is a back-to-back order in nature. You need to reserve 100 pieces of an item in order to finish you order. However, there are only 50 pieces available for reservation.
If you process this request, how many pieces are provided as the fulfillment for the order?

• A. 50 pieces, because full 100 quantities are not available.
• B. 25 pieces, only half of the quantities can be reserved.
• C. 0 pieces, because partial fulfillment of reservation not supported.
• D. 100 pieces, 50 from on-hand and 50 in the form of a purchase order.

Answer: C

NEW QUESTION 14
You have been asked to implement internationalization in your JSF web application. Where do you configure the supported locales?

• A. in the <f:view> tag of the Facelet page
• B. in the web.xml file
• C. in the faces-config.xml file
• D. in the src folder

Answer: A

NEW QUESTION 15
How do you specify a default error page in your web.xml file?

• A. <on-error><location>/general-error.html<location></on-error>
• B. <error-page><error-code>*</error-code><location>/general-error.html</location></error-page>
• C. <on-error><error-code>*</error-code><location>/general-error.html</location></on-error>
• D. <error-page><location>/general-error.html</location></error-page>

Answer: B

NEW QUESTION 16
Given the code fragment:

Which method should be used on line 3 to enable default validation mechanism?

• A. u.setProperty(String, Object)
• B. u.setProperty(Schema)
• C. u.setEventHandler(ValidationEventHandler)
• D. u.setAdapter(XmlAdapter)

Answer: D

NEW QUESTION 17
Which code snippet indicates that the page you are designing is capable of handling errors?

• A. <%@page errorPage=“errorHandler.jsp”%>
• B. <%= requestScope[‘javax.servlet.error’] !=null %>
• C. <%@page isErrorPage=“true”%>
• D. <c:set var=“errorHandler” value=“true”/>

Answer: C

NEW QUESTION 18
Given the code fragment:

Assuming this bean is used only in the code fragment above, how long will the injected Bean instance be available?

• A. for the lifetime of the enterprise application
• B. for the lifetime of the request
• C. for the lifetime of the session
• D. for the lifetime of the Service object

Answer: D

NEW QUESTION 19
You need to exchange large binary messages using chunks in a WebSocket application. Identify two ways in which you can receive partial messages. (Choose two.)

• A. Define an @OnMessage method with a single MimePart parameter.
• B. Use a ChunkListener interface implementation.
• C. Use a MessageHandler.Partial<ByteBuffer> interface implementation.
• D. Define an @OnMessage method with byte [] as the first parameter and a boolean as the second parameter.

Answer: CD

NEW QUESTION 20
Which type allows you to share servlet attributes across your entire web application?

• A. ServletContext
• B. HttpSession
• C. ServletRequest
• D. ServletConfig

Answer: A

NEW QUESTION 21
You need to load on-hand balances for go live. Which template should be used for this?

• A. InventoryBalanceImportTemplate.xlsm
• B. InventoryReservationImportTemplate.xlsm
• C. InventoryTransactionImportTemplate.xlsm
• D. InventoryOnHandBalanceTemplate.xlsm
• E. InventoryMiscellaneousTrxTemplate.xlsm

Answer: C

NEW QUESTION 22
......